Browse
Submit Data
Databases
API
Help

Dataset Information

20 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Bidirectional electroactive microbial biofilms and the role of biogenic sulfur in charge storage and release.

ABSTRACT: The formation of combined electrogenic/electrotrophic biofilms from marine sediments for the development of microbial energy storage systems was studied. Sediment samples from the German coasts of the Baltic and the North Sea were used as inocula for biofilm formation. Anodic biofilm cultivation was applied for a fast and reproducible biofilm formation. North-Sea- and Baltic-Sea-derived biofilms yielded comparable anodic current densities of about 7.2 A m^-2. The anodic cultivation was followed by a potential reversal regime, transitioning the electrode potential from 0.2 V to -0.8 V every 2 h to switch between anodic and cathodic conditions. The charge-discharge behavior was studied, revealing an electrochemical conversion of biogenic elemental sulfur as major charge-discharge mechanism. The microbial sequencing revealed strong differences between North- and Baltic-Sea-derived biofilms; however with a large number of known sulfur-converting and electrochemically active bacteria in both biofilms.

SUBMITTER: Izadi P

PROVIDER: S-EPMC8313490 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

An Electrochemical Strategy to Measure the Thickness of Electroactive Microbial Biofilms.

Project description:The study of electroactive microbial biofilms often requires knowledge of the biofilm thickness. Unfortunately, this parameter is, nowadays, only accessible through expensive microscopic techniques. This work overcomes this limitation by presenting a new strategy, exploiting the use of chronoamperometry (CA) alone. A mixed-culture biofilm is exposed to an O2-saturated solution during anode respiration to suppress its catalytic activity. Assuming that inactivation of the electrocatalytic process is caused by O2 diffusion through the biofilm, a simple relation allows the use of the time constant extracted from the fitting of the curve of the CA trace during inactivation for the straightforward and quantitative determination of biofilm thickness. The biofilm thickness obtained with this method obeys the expected trend reported for biofilm growth and is in agreement with optical measurements. Contrary to the techniques usually employed to determine biofilm thickness, this new strategy is very rapid, nondisruptive, inexpensive, and may become a convenient alternative with respect to expensive and time-consuming microscopic techniques.

| S-EPMC4964880 | biostudies-literature

Microbial electroactive biofilms dominated by Geoalkalibacter spp. from a highly saline-alkaline environment.

Project description:Understanding of the extreme microorganisms that possess extracellular electron transfer (EET) capabilities is pivotal to advance electromicrobiology discipline and to develop niche-specific microbial electrochemistry-driven biotechnologies. Here, we report on the microbial electroactive biofilms (EABs) possessing the outward EET capabilities from a haloalkaline environment of the Lonar lake. We used the electrochemical cultivation approach to enrich haloalkaliphilic EABs under 9.5 pH and 20 g/L salinity conditions. The electrodes controlled at 0.2 V vs. Ag/AgCl yielded the best-performing biofilms in terms of maximum bioelectrocatalytic current densities of 548 ± 23 and 437 ± 17 µA/cm2 with acetate and lactate substrates, respectively. Electrochemical characterization of biofilms revealed the presence of two putative redox-active moieties with the mean formal potentials of 0.183 and 0.333 V vs. Ag/AgCl, which represent the highest values reported to date for the EABs. 16S-rRNA amplicon sequencing of EABs revealed the dominance of unknown Geoalkalibacter sp. at ~80% abundance. Further investigations on the haloalkaliphilic EABs possessing EET components with high formal potentials might offer interesting research prospects in electromicrobiology.

| S-EPMC7555509 | biostudies-literature

Development of Electroactive and Anaerobic Ammonium-Oxidizing (Anammox) Biofilms from Digestate in Microbial Fuel Cells.

Project description:Microbial Fuel cells (MFCs) have been proposed for nutrient removal and energy recovery from different wastes. In this study the anaerobic digestate was used to feed H-type MFC reactors, one with a graphite anode preconditioned with Geobacter sulfurreducens and the other with an unconditioned graphite anode. The data demonstrate that the digestate acts as a carbon source, and even in the absence of anode preconditioning, electroactive bacteria colonise the anodic chamber, producing a maximum power density of 172.2 mW/m(2). The carbon content was also reduced by up to 60%, while anaerobic ammonium oxidation (anammox) bacteria, which were found in the anodic compartment of the reactors, contributed to nitrogen removal from the digestate. Overall, these results demonstrate that MFCs can be used to recover anammox bacteria from natural sources, and it may represent a promising bioremediation unit in anaerobic digestor plants for the simultaneous nitrogen removal and electricity generation using digestate as substrate.

| S-EPMC4530212 | biostudies-literature

Electroactive controlled release thin films.

Project description:We present the fabrication of nanoscale electroactive thin films that can be engineered to undergo remotely controlled dissolution in the presence of a small applied voltage (+1.25 V) to release precise quantities of chemical agents. These films, which are assembled by using a nontoxic, FDA-approved, electroactive material known as Prussian Blue, are stable enough to release a fraction of their contents after the application of a voltage and then to restabilize upon its removal. As a result, it is possible to externally trigger agent release, exert control over the relative quantity of agents released from a film, and release multiple doses from one or more films in a single solution. These electroactive systems may be rapidly and conformally coated onto a wide range of substrates without regard to size, shape, or chemical composition, and as such they may find use in a host of new applications in drug delivery as well as the related fields of tissue engineering, medical diagnostics, and chemical detection.

| S-EPMC2268127 | biostudies-literature

Biogenic volatile release from permafrost thaw is determined by the soil microbial sink.

Project description:Warming in the Arctic accelerates thawing of permafrost-affected soils, which leads to a release of greenhouse gases to the atmosphere. We do not know whether permafrost thaw also releases non-methane volatile organic compounds that can contribute to both negative and positive radiative forcing on climate. Here we show using proton transfer reaction-time of flight-mass spectrometry that substantial amounts of ethanol and methanol and in total 316 organic ions were released from Greenlandic permafrost soils upon thaw in laboratory incubations. We demonstrate that the majority of this release is taken up in the active layer above. In an experiment using 14C-labeled ethanol and methanol, we demonstrate that these compounds are consumed by microorganisms. Our findings highlight that the thawing permafrost soils are not only a considerable source of volatile organic compounds but also that the active layer regulates their release into the atmosphere.

| S-EPMC6109083 | biostudies-literature

Biogenic selenium and tellurium nanoparticles synthesized by environmental microbial isolates efficaciously inhibit bacterial planktonic cultures and biofilms.

Project description:The present study deals with Se(0)- and Te(0)-based nanoparticles bio-synthesized by two selenite- and tellurite-reducing bacterial strains, namely Stenotrophomonas maltophilia SeITE02 and Ochrobactrum sp. MPV1, isolated from polluted sites. We evidenced that, by regulating culture conditions and exposure time to the selenite and tellurite oxyanions, differently sized zero-valent Se and Te nanoparticles were produced. The results revealed that these Se(0) and Te(0) nanoparticles possess antimicrobial and biofilm eradication activity against Escherichia coli JM109, Pseudomonas aeruginosa PAO1, and Staphylococcus aureus ATCC 25923. In particular, Se(0) nanoparticles exhibited antimicrobial activity at quite low concentrations, below that of selenite. Toxic effects of both Se(0) and Te(0) nanoparticles can be related to the production of reactive oxygen species upon exposure of the bacterial cultures. Evidence so far achieved suggests that the antimicrobial activity seems to be strictly linked to the dimensions of the nanoparticles: indeed, the highest activity was shown by nanoparticles of smaller sizes. In particular, it is worth noting how the bacteria tested in biofilm mode responded to the treatment by Se(0) and Te(0) nanoparticles with a susceptibility similar to that observed in planktonic cultures. This suggests a possible exploitation of both Se(0) and Te(0) nanoparticles as efficacious antimicrobial agents with a remarkable biofilm eradication capacity.

| S-EPMC4468835 | biostudies-literature

Monolayer optical memory cells based on artificial trap-mediated charge storage and release.

Project description:Monolayer transition metal dichalcogenides are considered to be promising candidates for flexible and transparent optoelectronics applications due to their direct bandgap and strong light-matter interactions. Although several monolayer-based photodetectors have been demonstrated, single-layered optical memory devices suitable for high-quality image sensing have received little attention. Here we report a concept for monolayer MoS2 optoelectronic memory devices using artificially-structured charge trap layers through the functionalization of the monolayer/dielectric interfaces, leading to localized electronic states that serve as a basis for electrically-induced charge trapping and optically-mediated charge release. Our devices exhibit excellent photo-responsive memory characteristics with a large linear dynamic range of ∼4,700 (73.4 dB) coupled with a low OFF-state current (<4 pA), and a long storage lifetime of over 104 s. In addition, the multi-level detection of up to 8 optical states is successfully demonstrated. These results represent a significant step toward the development of future monolayer optoelectronic memory devices.

| S-EPMC5376667 | biostudies-literature

Unravelling biocomplexity of electroactive biofilms for producing hydrogen from biomass.

Project description:Leveraging nature's biocomplexity for solving human problems requires better understanding of the syntrophic relationships in engineered microbiomes developed in bioreactor systems. Understanding the interactions between microbial players within the community will be key to enhancing conversion and production rates from biomass streams. Here we investigate a bioelectrochemical system employing an enriched microbial consortium for conversion of a switchgrass-derived bio-oil aqueous phase (BOAP) into hydrogen via microbial electrolysis (MEC). MECs offer the potential to produce hydrogen in an integrated fashion in biorefinery platforms and as a means of energy storage through decentralized production to supply hydrogen to fuelling stations, as the world strives to move towards cleaner fuels and electricity-mediated transportation. A unique approach combining differential substrate and redox conditions revealed efficient but rate-limiting fermentation of the compounds within BOAP by the anode microbial community through a division of labour strategy combined with multiple levels of syntrophy. Despite the fermentation limitation, the adapted abilities of the microbial community resulted in a high hydrogen productivity of 9.35 L per L-day. Using pure acetic acid as the substrate instead of the biomass-derived stream resulted in a three-fold improvement in productivity. This high rate of exoelectrogenesis signifies the potential commercial feasibility of MEC technology for integration in biorefineries.

| S-EPMC5743829 | biostudies-literature

Supercapacitive microbial fuel cell: Characterization and analysis for improved charge storage/delivery performance.

Project description:Supercapacitive microbial fuel cells with various anode and cathode dimensions were investigated in order to determine the effect on cell capacitance and delivered power quality. The cathode size was shown to be the limiting component of the system in contrast to anode size. By doubling the cathode area, the peak power output was improved by roughly 120% for a 10ms pulse discharge and internal resistance of the cell was decreased by ?47%. A model was constructed in order to predict the performance of a hypothetical cylindrical MFC design with larger relative cathode size. It was found that a small device based on conventional materials with a volume of approximately 21cm(3) would be capable of delivering a peak power output of approximately 25mW at 70mA, corresponding to ?1300Wm(-3).

| S-EPMC5001197 | biostudies-literature