Browse
Submit Data
Databases
API
Help

Dataset Information

30 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

High-order replica bands in monolayer FeSe/SrTiO₃ revealed by polarization-dependent photoemission spectroscopy.

ABSTRACT: The mechanism of the enhanced superconductivity in monolayer FeSe/SrTiO₃ has been enthusiastically studied and debated over the past decade. One specific observation has been taken to be of central importance: the replica bands in the photoemission spectrum. Although suggestive of electron-phonon interaction in the material, the essence of these spectroscopic features remains highly controversial. In this work, we conduct angle-resolved photoemission spectroscopy measurements on monolayer FeSe/SrTiO₃ using linearly polarized photons. This configuration enables unambiguous characterization of the valence electronic structure with a suppression of the spectral background. We consistently observe high-order replica bands derived from various Fe 3d bands, similar to those observed on bare SrTiO₃. The intensity of the replica bands is unexpectedly high and different between d_xy and d_yz bands. Our results provide new insights on the electronic structure of this high-temperature superconductor and the physical origin of the photoemission replica bands.

SUBMITTER: Liu C

PROVIDER: S-EPMC8319137 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Significantly enhanced superconductivity in monolayer FeSe films on SrTiO3(001) via metallic δ-doping.

Project description:Superconductivity transition temperature (Tc) marks the inception of a macroscopic quantum phase-coherent paired state in fermionic systems. For 2D superconductivity, the paired electrons condense into a coherent superfluid state at Tc, which is usually lower than the pairing temperature, between which intrinsic physics including Berezinskii-Kosterlitz-Thouless transition and pseudogap state are hotly debated. In the case of monolayer FeSe superconducting films on SrTiO3(001), although the pairing temperature (Tp) is revealed to be 65-83 K by using spectroscopy characterization, the measured zero-resistance temperature ([Formula: see text]) is limited to 20 K. Here, we report significantly enhanced superconductivity in monolayer FeSe films by δ-doping of Eu or Al on SrTiO3(001) surface, in which [Formula: see text] is enhanced by 12 K with a narrowed transition width ΔTc ∼ 8 K, compared with non-doped samples. Using scanning tunneling microscopy/spectroscopy measurements, we demonstrate lowered work function of the δ-doped SrTiO3(001) surface and enlarged superconducting gaps in the monolayer FeSe with improved morphology/electronic homogeneity. Our work provides a practical route to enhance 2D superconductivity by using interface engineering.

| S-EPMC10833465 | biostudies-literature

Ballistic transport spectroscopy of spin-orbit-coupled bands in monolayer graphene on WSe2.

Project description:Van der Waals interactions with transition metal dichalcogenides were shown to induce strong spin-orbit coupling (SOC) in graphene, offering great promises to combine large experimental flexibility of graphene with unique tuning capabilities of the SOC. Here, we probe SOC-driven band splitting and electron dynamics in graphene on WSe2 by measuring ballistic transverse magnetic focusing. We found a clear splitting in the first focusing peak whose evolution in charge density and magnetic field is well reproduced by calculations using the SOC strength of ~ 13 meV, and no splitting in the second peak that indicates stronger Rashba SOC. Possible suppression of electron-electron scatterings was found in temperature dependence measurement. Further, we found that Shubnikov-de Haas oscillations exhibit a weaker band splitting, suggesting that it probes different electron dynamics, calling for a new theory. Our study demonstrates an interesting possibility to exploit ballistic electron motion pronounced in graphene for emerging spin-orbitronics.

| S-EPMC10542375 | biostudies-literature

What makes the Tc of monolayer FeSe on SrTiO3 so high: a sign-problem-free quantum Monte Carlo study.

Project description:Monolayer FeSe films grown on SrTiO3 (STO) substrate show superconducting gap-opening temperatures ([Formula: see text]) which are almost an order of magnitude higher than those of the bulk FeSe and are highest among all known Fe-based superconductors. Angle-resolved photoemission spectroscopy observed "replica bands" suggesting the importance of the interaction between FeSe electrons and STO phonons. These facts rejuvenated the quest for [Formula: see text] enhancement mechanisms in iron-based, especially iron-chalcogenide, superconductors. Here, we perform the first numerically-exact sign-problem-free quantum Monte Carlo simulations to iron-based superconductors. We (1) study the electronic pairing mechanism intrinsic to heavily electron doped FeSe films, and (2) examine the effects of electron-phonon interaction between FeSe and STO as well as nematic fluctuations on [Formula: see text]. Armed with these results, we return to the question "what makes the [Formula: see text] of monolayer FeSe on SrTiO3 so high?" in the conclusion and discussions.

| S-EPMC4914519 | biostudies-literature

Ubiquitous strong electron-phonon coupling at the interface of FeSe/SrTiO3.

Project description:The observation of replica bands in single-unit-cell FeSe on SrTiO3 (STO)(001) by angle-resolved photoemission spectroscopy (ARPES) has led to the conjecture that the coupling between FeSe electrons and the STO phonons are responsible for the enhancement of Tc over other FeSe-based superconductors. However the recent observation of a similar superconducting gap in single-unit-cell FeSe/STO(110) raised the question of whether a similar mechanism applies. Here we report the ARPES study of the electronic structure of FeSe/STO(110). Similar to the results in FeSe/STO(001), clear replica bands are observed. We also present a comparative study of STO(001) and STO(110) bare surfaces, and observe similar replica bands separated by approximately the same energy, indicating this coupling is a generic feature of the STO surfaces and interfaces. Our findings suggest that the large superconducting gaps observed in FeSe films grown on different STO surface terminations are likely enhanced by a common mechanism.

| S-EPMC5311057 | biostudies-literature

Anomalous correlation effects and unique phase diagram of electron-doped FeSe revealed by photoemission spectroscopy.

Project description:FeSe layer-based superconductors exhibit exotic and distinctive properties. The undoped FeSe shows nematicity and superconductivity, while the heavily electron-doped KxFe2-ySe2 and single-layer FeSe/SrTiO3 possess high superconducting transition temperatures that pose theoretical challenges. However, a comprehensive study on the doping dependence of an FeSe layer-based superconductor is still lacking due to the lack of a clean means of doping control. Through angle-resolved photoemission spectroscopy studies on K-dosed thick FeSe films and FeSe0.93S0.07 bulk crystals, here we reveal the internal connections between these two types of FeSe-based superconductors, and obtain superconductivity below ? 46?K in an FeSe layer under electron doping without interfacial effects. Moreover, we discover an exotic phase diagram of FeSe with electron doping, including a nematic phase, a superconducting dome, a correlation-driven insulating phase and a metallic phase. Such an anomalous phase diagram unveils the remarkable complexity, and highlights the importance of correlations in FeSe layer-based superconductors.

| S-EPMC4786746 | biostudies-literature

Topological edge states in high-temperature superconductiving FeSe/SrTiO3 films with Te substitution.

Project description:Using first principles theory, we investigated the behavior of the one-dimensional (1D) topological edge states of high temperature superconductiviing FeSe/SrTiO3 films with Te atoms substitution to Se atoms in the bottom (top) layer in single-layer FeSe, as a function of strain. It was discovered that the 1D topological edge states are present in single-unit-cell FeSe film on SrTiO3, but are absent when more than 50% Se atoms are replaced by Te atoms. Stress induced displacive phase transformation exists in FeSe/SrTiO3 film when Te atoms substitute Se atoms in the bottom (top) layer in single-layer FeSe under 3% strain respectively. The 1D topological edge states are present under 3% (1.8%) strain in FeSe/SrTiO3 films with Te substitution Se in the bottom (top) layer in single-layer FeSe, even up to 5%, respectively. This indicates that the bonding angle of Se-Fe-Se (Te) and the distance of Te (or Se) atoms to the Fe plane are correlated with the topological edge states. Our findings provide an effective interface system that provides both superconducting and topological states, opening a new route for realizing 2D topological superconductors with proximity effect.

| S-EPMC6411874 | biostudies-literature

Incommensurate smectic phase in close proximity to the high-Tc superconductor FeSe/SrTiO3.

Project description:Superconductivity is significantly enhanced in monolayer FeSe grown on SrTiO3, but not for multilayer films, in which large strength of nematicity develops. However, the link between the high-transition temperature superconductivity in monolayer and the correlation related nematicity in multilayer FeSe films is not well understood. Here, we use low-temperature scanning tunneling microscopy to study few-layer FeSe thin films grown by molecular beam epitaxy. We observe an incommensurate long-range smectic phase, which solely appears in bilayer FeSe films. The smectic order still locally exists and gradually fades away with increasing film thickness, while it suddenly vanishes in monolayer FeSe, indicative of an abrupt smectic phase transition. Surface alkali-metal doping can suppress the smectic phase and induce high-Tc superconductivity in bilayer FeSe. Our observations provide evidence that the monolayer FeSe is in close proximity to the smectic phase, and its superconductivity is likely enhanced by this electronic instability as well.

| S-EPMC8044195 | biostudies-literature

Spectroscopic evidence of superconductivity pairing at 83 K in single-layer FeSe/SrTiO3 films.

Project description:Single-layer FeSe films grown on the SrTiO3 substrate (FeSe/STO) have attracted much attention because of their possible record-high superconducting critical temperature (Tc) and distinct electronic structures. However, it has been under debate on how high its Tc can really reach due to the inconsistency of the results from different measurements. Here we report spectroscopic evidence of superconductivity pairing at 83 K in single-layer FeSe/STO films. By preparing high-quality single-layer FeSe/STO films, we observe strong superconductivity-induced Bogoliubov back-bending bands that extend to rather high binding energy ~ 100 meV by high-resolution angle-resolved photoemission measurements. They provide a new definitive benchmark of superconductivity pairing that is directly observed up to 83 K. Moreover, we find that the pairing state can be further divided into two temperature regions. These results indicate that either Tc as high as 83 K is achievable, or there is a pseudogap formation from superconductivity fluctuation in single-layer FeSe/STO films.

| S-EPMC8121788 | biostudies-literature

Light induced non-volatile switching of superconductivity in single layer FeSe on SrTiO3 substrate.

Project description:The capability of controlling superconductivity by light is highly desirable for active quantum device applications. Since superconductors rarely exhibit strong photoresponses, and optically sensitive materials are often not superconducting, efficient coupling between these two characters can be very challenging in a single material. Here we show that, in FeSe/SrTiO3 heterostructures, the superconducting transition temperature in FeSe monolayer can be effectively raised by the interband photoexcitations in the SrTiO3 substrate. Attributed to a light induced metastable polar distortion uniquely enabled by the FeSe/SrTiO3 interface, this effect only requires a less than 50 µW cm-2 continuous-wave light field. The fast optical generation of superconducting zero resistance state is non-volatile but can be rapidly reversed by applying voltage pulses to the back of SrTiO3 substrate. The capability of switching FeSe repeatedly and reliably between normal and superconducting states demonstrate the great potential of making energy-efficient quantum optoelectronics at designed correlated interfaces.

| S-EPMC6325130 | biostudies-literature

Direct imaging of electron transfer and its influence on superconducting pairing at FeSe/SrTiO3 interface.

Project description:The exact mechanism responsible for the significant enhancement of the superconducting transition temperature (Tc) of monolayer iron selenide (FeSe) films on SrTiO3 (STO) over that of bulk FeSe is an open issue. We present the results of a coordinated study of electrical transport, low temperature electron energy-loss spectroscopy (EELS), and high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) measurements on FeSe/STO films of different thicknesses. HAADF-STEM imaging together with EELS mapping across the FeSe/STO interface shows direct evidence of electrons transferred from STO to the FeSe layer. The transferred electrons were found to accumulate within the first two atomic layers of the FeSe films near the STO substrate. An additional Se layer is also resolved to reside between the FeSe film and the TiO x -terminated STO substrate. Our transport results found that a positive backgate applied from STO is particularly effective in enhancing Tc of the films while minimally changing the carrier density. This increase in Tc is due to the positive backgate that "pulls" the transferred electrons in FeSe films closer to the interface and thus enhances their coupling to interfacial phonons and also the electron-electron interaction within FeSe films.

| S-EPMC5856486 | biostudies-literature