Dataset Information

Effects of Charcoal on Carbonyl Delivery from Commercial, Research, and Make-Your-Own Cigarettes.

ABSTRACT: Previous literature has shown that adding charcoal to cigarette filters can have varying effects on the delivery of toxic carbonyls depending on filter design, amount of charcoal, and puffing profiles. However, these studies have relied on either comparisons between commercially available charcoal and noncharcoal filtered cigarettes or experimental modification of filters to insert a charcoal plug into existing cellulose acetate filters. Make-your-own (MYO) cigarettes can help obviate many of the potential pitfalls of previous studies; thus, we conducted studies using commercial charcoal cigarettes and MYO cigarettes to determine the effects of charcoal on carbonyl delivery. To do this, we analyzed carbonyls in mainstream smoke by HPLC-UV after derivatization with 2,4-dinitrophenylhydrazine (DNPH). Charcoal was added in-line after the cigarettes or through the use of MYO charcoal cigarette tubes. MYO cigarettes had carbonyl deliveries similar to that of 3R4F research cigarette, regardless of tobacco type. The greatest effect on carbonyl delivery was observed with 200 mg of charcoal, significantly reducing all carbonyls under both methods tested. However, "on-tow" design charcoal filters, available on many commercially available charcoal brands, appeared to have a minimal effect on carbonyl delivery under intense smoking methods. Overall, we found that charcoal, when added in sufficient quantity (200 mg) as a plug, can substantially reduce carbonyl delivery for both MYO and conventional cigarettes. As carbonyls are related to negative health outcomes, such reductions may be associated with reductions in carbonyl-related harm in smokers.

SUBMITTER: Reilly SM

PROVIDER: S-EPMC8323621 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Similar Datasets

Project description:IntroductionAlthough e-cigarettes share common features such as power units, heating elements and e-liquids, the variability in design and possibility for customization represent potential risks for consumers. A main health concern is the exposure to carbonyl compounds, which are formed from the main components of e-liquids, propylene glycol and glycerol, through thermal decomposition. Levels of carbonyl emissions in e-cigarette aerosols depend, amongst others, on the power supplied to the coil. Thus, e-cigarettes with adjustable power outputs might lead to high exposures to carbonyls if the users increase the power output excessively. The aim of this work was to elucidate the generation of carbonyls in relation to undue battery power setting.MethodsCarbonyl emissions were generated by two modular e-cigarettes equipped with two atomizers containing coils of different resistance following the ISO 20768:2018 method. The battery power output was increased from the lower wattage level to above the power range recommended by the producer. Carbonyls were trapped by a 2,4-dinitrophenylhydrazine (DNPH) solution and analysed by LC-MS/MS.ResultsThe amount of carbonyl emissions increased with increasing power setting. An exponential incline was observed when the applied power level exceeded the recommended power range. Exceeding the recommended power range by just 5 watts resulted in up to twenty times the amount of carbonyls emitted at the recommended upper power level. Generation of acetaldehyde and acrolein next to other carbonyls was prominent at high power outputs.ConclusionsE-cigarettes with customisable power setting might generate high amounts of carbonyls if the battery power output is set by the consumer to levels above the recommended range. This represents a high risk of exposure to carbonyls and thus should be avoided by integrating safety features in e-cigarette devices to limit the possible power settings to the range specified by the manufacturer.

Project description:Smoking topography parameters differ substantially between individual smokers and may lead to significant variation in tobacco smoke exposure and risk for tobacco-caused diseases. However, to date, little is known regarding the impact of individual puff parameters on the delivery of many harmful smoke constituents including carbonyls. To examine this, we determined the effect of altering individual puff parameters on mainstream smoke carbonyl levels in machine-smoked reference cigarettes. Carbonyls including formaldehyde, acetaldehyde, crotonaldehyde, propionaldehyde, methyl ethyl ketone (MEK), acrolein, and acetone were determined in cigarette smoke by HPLC after derivatization with 2,4-dinitrophenylhydrazine (DNPH). Deliveries of all carbonyls were nearly two-fold greater when cigarettes were smoked according to the more intense Health Canada Intense (HCI) protocol compared to the International Organization of Standardization (ISO) method, consistent with the two-fold difference in total puff volume between methods (ISO: 280-315 mL; CI: 495-605 mL). When individual topography parameters were assessed, changes in puff volume alone had the greatest effect on carbonyl delivery as predicted with total carbonyls being strongly correlated with overall puff volume (r2: 0.52-0.99) regardless of how the differences in volume were achieved. All seven of the carbonyls examined showed a similar relationship with puff volume. Minor effects on carbonyl levels were observed from vent blocking and changing the interpuff interval, while effects of changing puff duration and peak flow rate were minimal. Overall, these results highlight the importance of considering topography, especially puff volume, when the toxicant delivery and potential exposure smokers receive are assessed. The lack of an impact of other behaviors, including puff intensity and duration independent of volume, indicate that factors such as temperature and peak flow rate may have minimal overall effects on carbonyl production and delivery.

Dataset Information

Effects of Charcoal on Carbonyl Delivery from Commercial, Research, and Make-Your-Own Cigarettes.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets