Browse
Submit Data
Databases
API
Help

Dataset Information

33 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Retention of heavy metals from mine tailings using Technosols prepared with native soils and nanoparticles.

ABSTRACT: A large number of heavy metals are generated in tailings of precious metal extractive operations, which could cause high levels of water contamination. Because of the environmental and health concerns, many conventional technologies have been applied to capture heavy metals from mining-polluted streams with limited performance in terms of effectiveness and immobilization efficiency. In this context, this study evaluates the retention of mine-generated heavy metals using Technosols prepared with iron-rich soils and multicomponent nanoparticles of Fe/FeS (MCNPs). Firstly, nanoparticles were synthesized using orange-peel extract and sodium borohydride (NaBH4) as reductant agents and FeCl₃.6H₂O and Na₂SO₄ as metal precursors. The TEM and SEM images showed nanoparticles with roughly spherical morphology with a size in the range of 35.9 ± 11.7 nm arranged in a kind of filamentous structure. Secondly, Soils were dosed with 1% and 3% (w/w) of multicomponent nanoparticles and then used to capture heavy metals present in mine tailings using batch and fixed-bed column tests. The Technosol prepared with 97% soil, and 3% MCNPs reached on average 70% retention of heavy metals for fixed-bed setups. While, in batch experiments using the same Technosol, the capture of heavy metals was 80% after 6 min of treatment, and upon reaching 30 min, 90% removal was attained. This suggests that tailored Technosols might be part of a promising technology to treat contaminated mine tailings with reasonable spending.

SUBMITTER: Bolanos-Guerron D

PROVIDER: S-EPMC8342914 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Assessment of the ecological risk and mobility of arsenic and heavy metals in soils and mine tailings from the Carmina mine site (Asturias, NW Spain).

Project description:An evaluation of the pollution, distribution, and mobility of arsenic and heavy metals in spoil heaps and soils surrounding the abandoned Carmina lead-zinc mine (Asturias, northern Spain) was carried out. Fractionation of arsenic was performed by an arsenic-specific sequential extraction method; while, heavy metal fractionations was carried out using the protocol of the Bureau Community of Reference (BCR) (now renamed Standards, Measurements and Testing Programme). Arsenic appeared predominantly associated with amorphous iron oxyhydroxides. Among the heavy metals, lead and zinc showed high availability since significant amounts were extracted in the nonresidual fractions; whereas, chromium, copper and nickel showed very low availability, indicating their lithogenic origins. The results showed that the extractability of heavy metals in soils is influenced mainly by the presence of iron and manganese oxides as well as by pH and Eh. Multiple pollution indices, including the enrichment factor (EF), geoaccumulation index (Igeo), ecological risk index (Er) and potential ecological risk index (PERI), were used to assess the degree of soil pollution in the mine area. All results showed that lead was the key factor causing the pollution and ecological risk in the studied area, and copper, zinc and arsenic also had significant contributions. Notably, the sites at higher risk coincided with those with high availability of arsenic and heavy metals. This study provides an integrative approach that serves as a powerful tool to evaluate the metal pollution status and potential threats to the local environment of abandoned mining areas, and the results are useful for making management decisions in these areas.

| S-EPMC10874346 | biostudies-literature

Evaluation of soil heavy metals pollution and the phytoremediation potential of copper-nickel mine tailings ponds.

Project description:Heavy metal pollution in soils caused by mining has led to major environmental problems around the globe and seriously threatens the ecological environment. The assessment of heavy metal pollution and the local phytoremediation potential of contaminated sites is an important prerequisite for phytoremediation. Therefore, the purpose of this study was to understand the characteristics of heavy metal pollution around a copper-nickel mine tailings pond and screen local plant species that could be potentially suitable for phytoremediation. The results showed that Cd, Cu, Ni, and Cr in the soil around the tailings pond were at the heavy pollution level, Mn and Pb pollution was moderate, and Zn and As pollution was light; The positive matrix factorization (PMF) model results showed that the contributions made by industrial pollution to Cu and Ni were 62.5% and 66.5%, respectively, atmospheric sedimentation and agricultural pollution contributions to Cr and Cd were 44.6% and 42.8%, respectively, the traffic pollution contribution to Pb was 41.2%, and the contributions made by natural pollution sources to Mn, Zn, and As were 54.5%, 47.9%, and 40.0% respectively. The maximum accumulation values for Cu, Ni, Cr, Cd, and As in 10 plants were 53.77, 102.67, 91.10, 1.16 and 7.23 mg/kg, respectively, which exceeded the normal content of heavy metals in plants. Ammophila breviligulata Fernald had the highest comprehensive extraction coefficient (CEI) and comprehensive stability coefficient (CSI) at 0.81 and 0.83, respectively. These results indicate that the heavy metal pollution in the soil around the copper nickel mine tailings pond investigated in this study is serious and may affect the normal growth of plants. Ammophila breviligulata Fernald has a strong comprehensive remediation capacity and can be used as a remediation plant species for multiple metal compound pollution sites.

| S-EPMC9983881 | biostudies-literature

The effect of heavy metals on thiocyanate biodegradation by an autotrophic microbial consortium enriched from mine tailings.

Project description:Bioremediation systems represent an environmentally sustainable approach to degrading industrially generated thiocyanate (SCN-), with low energy demand and operational costs and high efficiency and substrate specificity. However, heavy metals present in mine tailings effluent may hamper process efficiency by poisoning thiocyanate-degrading microbial consortia. Here, we experimentally tested the tolerance of an autotrophic SCN--degrading bacterial consortium enriched from gold mine tailings for Zn, Cu, Ni, Cr, and As. All of the selected metals inhibited SCN- biodegradation to different extents, depending on concentration. At pH of 7.8 and 30 °C, complete inhibition of SCN- biodegradation by Zn, Cu, Ni, and Cr occurred at 20, 5, 10, and 6 mg L-1, respectively. Lower concentrations of these metals decreased the rate of SCN- biodegradation, with relatively long lag times. Interestingly, the microbial consortium tolerated As even at 500 mg L-1, although both the rate and extent of SCN- biodegradation were affected. Potentially, the observed As tolerance could be explained by the origin of our microbial consortium in tailings derived from As-enriched gold ore (arsenopyrite). This study highlights the importance of considering metal co-contamination in bioreactor design and operation for SCN- bioremediation at mine sites. KEY POINTS: • Both the efficiency and rate of SCN- biodegradation were inhibited by heavy metals, to different degrees depending on type and concentration of metal. • The autotrophic microbial consortium was capable of tolerating high concentrations of As, potential having adapted to higher As levels derived from the tailings source.

| S-EPMC7778618 | biostudies-literature

Polydopamine Nanoparticles Prepared Using Redox-Active Transition Metals.

Project description:Autoxidation of dopamine to polydopamine by dissolved oxygen is a slow process that requires highly alkaline conditions. Polydopamine can be formed rapidly also in mildly acidic and neutral solutions by using redox-active transition-metal ions. We present a comparative study of polydopamine nanoparticles formed by autoxidation and aerobic or anaerobic oxidation in the presence of Ce(IV), Fe(III), Cu(II), and Mn(VII). The UV-vis spectra of the purified nanoparticles are similar, and dopaminechrome is an early intermediate species. At low pH, Cu(II) requires the presence of oxygen and chloride ions to produce polydopamine at a reasonable rate. The changes in dispersibility and surface charge take place at around pH 4, which indicates the presence of ionizable groups, especially carboxylic acids, on their surface. X-ray photoelectron spectroscopy shows the presence of three different classes of carbons, and the carbonyl/carboxylate carbons amount to 5-15 atom %. The N 1s spectra show the presence of protonated free amino groups, suggesting that these groups may interact with the π-electrons of the intact aromatic dihydroxyindole moieties, especially in the metal-induced samples. The autoxidized and Mn(VII)-induced samples do not contain metals, but the metal content is 1-2 atom % in samples prepared with Ce(IV) or Cu(II), and ca. 20 atom % in polydopamine prepared in the presence of Fe(III). These differences in the metal content can be explained by the oxidation and complexation properties of the metals using the general model developed. In addition, the nitrogen content is lower in the metal-induced samples. All of the metal oxidants studied can be used to rapidly prepare polydopamine at room temperature, but the possible influence of the metal content and nitrogen loss should be taken into account.

| S-EPMC6727379 | biostudies-literature

Contamination, Source Apportionment, and Health Risk Assessment of Heavy Metals in Farmland Soils Surrounding a Typical Copper Tailings Pond.

Project description:Tailings resulting from mining and smelting activities may cause soil heavy-metal pollution and harm human health. To evaluate the environmental impact of heavy metals from tailings on farmland soils in the surrounding area, heavy metals (As, Cd, Cr, Cu, Ni, Pb, and Zn) in tailings and farmland soils in the vicinity of a typical copper tailings pond were analyzed. Contamination status, potential sources, and health risks for farmland soils were investigated. The results showed that the tailings contained a high concentration of Cu (1136.23 mg/kg). The concentrations of Cd and Cu in the farmland soils exceeded the soil quality standard. The geoaccumulation index (Igeo) indicated that the soils were moderately polluted by Cu and Cd, and slightly polluted by Ni, Cr, and Zn. The absolute principal component scores-multiple linear regression (APCS-MLR) model was applied for source apportionment. The results showed that tailings release is the main source of soil heavy-metals contamination, accounting for 35.81%, followed by agricultural activities (19.41%) and traffic emission (16.31%). The health risk assessment suggested that the children in the study region were exposed to non-carcinogenic risks caused by As, while the non-carcinogenic risk to adults and the carcinogenic risk to both adults and children were at acceptable levels. It is necessary to take effective measures to control heavy-metal contamination from tailings releases to protect humans, especially children, from adverse health risks.

| S-EPMC9656670 | biostudies-literature

Heavy metals' data in soils for agricultural activities.

Project description:In this article, the heavy metals in soils for agricultural activities were analyzed statistically. Ten (10) soil samples were randomly taken across the agricultural zones in Odo-Oba, southwestern Nigeria. Ten (10) metals; namely: copper (Cu), lead (Pb), chromium (Cr), arsenic (As), zinc (Zn), cadmium (Cd), nickel (Ni), antimony (Sb), cobalt (Co) and vanadium (V) were determined and compared with the guideline values. When the values were compared with the international standard, none of the heavy metals in the study area exceeded the threshold limit. However, the maximum range of the samples showed that Cr and V exceeded the permissible limit which could be associated with ecological risk. The data can reveal the distributions of heavy metals in the agricultural topsoil of Odo-Oba, and can be used to estimate the risks associated with the consumption of crops grown on such soils.

| S-EPMC5998650 | biostudies-literature

Integron diversity in heavy-metal-contaminated mine tailings and inferences about integron evolution.

Project description:Integrons are horizontal gene transfer (HGT) systems containing elements necessary for site-specific recombination and expression of foreign DNA. The overall phylogenetic distribution of integrons and range of genes that can be transferred by integrons are unknown. This report contains an exploration of integrons in an environmental microbial community and an investigation of integron evolution. First, using culture-independent techniques, we explored the diversity of integrons and integron-transferred genes in heavy-metal-contaminated mine tailings. Using degenerate primers, we amplified integron integrase genes from the tailings. We discovered 14 previously undescribed integrase genes, including six novel gene lineages. In addition, we found 11 novel gene cassettes in this sample. One of the gene cassettes that we sequenced is similar to a gene that codes for a step in a pathway for nitroaromatic catabolism, a group of compounds associated with mining activity. This suggests that integrons may be important for gene transfer in response to selective pressures other than the presence of antibiotics. We also investigated the evolution of integrons by statistically comparing the phylogenies of 16S rRNA and integrase genes from the same organisms, using sequences from GenBank and various sequencing projects. We found significant differences between the organismal (16S rRNA) and integrase trees, and we suggest that these differences may be due to HGT.

| S-EPMC348930 | biostudies-literature

Chronic trace metals effects of mine tailings on estuarine assemblages revealed by environmental DNA.

Project description:Mine tailing disasters have occurred worldwide and contemporary release of tailings of large proportions raise concerns of the chronic impacts that trace metals may have on the aquatic biodiversity. Environmental metabarcoding (eDNA) offers an as yet poorly explored opportunity for biological monitoring of impacted aquatic ecosystems from mine tailings and contaminated sediments. eDNA has been increasingly recognized to be an effective method to detect previously unrecognized small-sized Metazoan taxa, but their ecological responses to environmental pollution has not been assessed by metabarcoding. Here, we evaluated chronic effects of trace metal contamination from sediment eDNA of the Rio Doce estuary, 1.7 years after the Samarco mine tailing disaster, which released over 40 million m3 of iron tailings in the Rio Doce river basin. We identified 123 new sequence variants environmental taxonomic units (eOTUs) of benthic taxa and an assemblage composition dominated by Nematoda, Crustacea and Platyhelminthes; typical of other estuarine ecosystems. We detected environmental filtering on the meiofaunal assemblages and multivariate analysis revealed strong influence of Fe contamination, supporting chronic impacts from mine tailing deposition in the estuary. This was in contrast to environmental filtering of meiofaunal assemblages of non-polluted estuaries. Here, we suggest that the eDNA metabarcoding technique provides an opportunity to fill up biodiversity gaps in coastal marine ecology and may become a valid method for long term monitoring studies in mine tailing disasters and estuarine ecosystems with high trace metals content.

| S-EPMC6842558 | biostudies-literature

Heavy metals in the Arctic: Distribution and enrichment of five metals in Alaskan soils.

Project description:Metal contamination of food and water resources is a known public health issue in Arctic and sub-Arctic communities due to the proximity of many communities to mining and drilling sites. In addition, permafrost thaw may release heavy metals sequestered in previously frozen soils, potentially contaminating food and water resources by increasing the concentration of metals in freshwater, plants, and wildlife. Here we assess the enrichment of selected heavy metals in Alaskan soils by synthesizing publicly available data of soil metal concentrations. We analyzed data of soil concentrations of arsenic, chromium, mercury, nickel, and lead from over 1,000 samples available through the USGS Alaskan Geochemical Database to evaluate 1) the spatial distribution of sampling locations for soil metal analysis, 2) metal concentrations in soils from different land cover types and depths, and 3) the occurrence of soils in Alaska with elevated metal concentrations relative to other soils. We found substantial clustering of sample sites in the southwestern portion of Alaska in discontinuous and sporadic permafrost, while the continuous permafrost zone in Northern Alaska and the more populous Interior are severely understudied. Metal concentration varied by land cover type but lacked consistent patterns. Concentrations of chromium, mercury, and lead were higher in soils below 10 cm depth, however these deeper soils are under-sampled. Arsenic, chromium, mercury, nickel and lead concentrations exceeded average values for US soils by one standard deviation or more in 3.7% to 18.7% of the samples in this dataset. Our analysis highlights critical gaps that impede understanding of how heavy metals in thawing permafrost soils may become mobilized and increase exposure risk for Arctic communities.

| S-EPMC7269202 | biostudies-literature

Nano silica-mediated stabilization of heavy metals in contaminated soils.

Project description:Soil contamination with heavy metals presents a substantial environmental peril, necessitating the exploration of innovative remediation approaches. This research aimed to investigate the efficiency of nano-silica in stabilizing heavy metals in a calcareous heavy metal-contaminated soil. The soil was treated with five nano-silica levels of 0, 100, 200, 500, and 1000 mg/kg and incubated for two months. The results showed that nano-silica had a specific surface area of 179.68 m2/g . At 1000 mg/kg, the DTPA-extractable concentrations of Pb, Zn, Cu, Ni, and Cr decreased by 12%, 11%, 11.6%, 10%, and 9.5% compared to the controls, respectively. Additionally, as the nano-silica application rate increased, both soil pH and specific surface area increased. The augmentation of nano-silica adsorbent in the soil led to a decline in the exchangeable (EX) and carbonate-bound fractions of Pb, Cu, Zn, Ni, and Cr, while the distribution of heavy metals in fractions bonded with Fe-Mn oxides, organic matter, and residue increased. The use of 1000 mg/kg nano-silica resulted in an 8.0% reduction in EX Pb, 4.5% in EX Cu, 7.3% in EX Zn, 7.1% in EX Ni, and 7.9% in EX Cr compared to the control treatment. Overall, our study highlights the potential of nano silica as a promising remediation strategy for addressing heavy metal pollution in contaminated soils, offering sustainable solutions for environmental restoration and ecosystem protection.

| S-EPMC11372104 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data