Family-Centered Design: Interactive Performance Testing and User Interface Evaluation of the Slovenian eDavki Public Tax Portal.
Ontology highlight
ABSTRACT:
SUBMITTER: Trilar J
PROVIDER: S-EPMC8348796 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:BackgroundRehabilitation technologies for people with stroke are rapidly evolving. These technologies have the potential to support higher volumes of rehabilitation to improve outcomes for people with stroke. Despite growing evidence of their efficacy, there is a lack of uptake and sustained use in stroke rehabilitation and a call for user-centered design approaches during technology design and development. This study focuses on a novel rehabilitation technology called exciteBCI, a complex neuromodulatory wearable technology in the prototype stage that augments locomotor rehabilitation for people with stroke. The exciteBCI consists of a brain computer interface, a muscle electrical stimulator, and a mobile app.ObjectiveThis study presents the evaluation phase of an iterative user-centered design approach supported by a qualitative descriptive methodology that sought to (1) explore users' perspectives and experiences of exciteBCI and how well it fits with rehabilitation, and (2) facilitate modifications to exciteBCI design features.MethodsThe iterative usability evaluation of exciteBCI was conducted in 2 phases. Phase 1 consisted of 3 sprint cycles consisting of single usability sessions with people with stroke (n=4) and physiotherapists (n=4). During their interactions with exciteBCI, participants used a "think-aloud" approach, followed by a semistructured interview. At the end of each sprint cycle, device requirements were gathered and the device was modified in preparation for the next cycle. Phase 2 focused on a "near-live" approach in which 2 people with stroke and 1 physiotherapist participated in a 3-week program of rehabilitation augmented by exciteBCI (n=3). Participants completed a semistructured interview at the end of the program. Data were analyzed from both phases using conventional content analysis.ResultsOverall, participants perceived and experienced exciteBCI positively, while providing guidance for iterative changes. Five interrelated themes were identified from the data: (1) "This is rehab" illustrated that participants viewed exciteBCI as having a good fit with rehabilitation practice; (2) "Getting the most out of rehab" highlighted that exciteBCI was perceived as a means to enhance rehabilitation through increased engagement and challenge; (3) "It is a tool not a therapist," revealed views that the technology could either enhance or disrupt the therapeutic relationship; and (4) "Weighing up the benefits versus the burden" and (5) "Don't make me look different" emphasized important design considerations related to device set-up, use, and social acceptability.ConclusionsThis study offers several important findings that can inform the design and implementation of rehabilitation technologies. These include (1) the design of rehabilitation technology should support the therapeutic relationship between the patient and therapist, (2) social acceptability is a design priority in rehabilitation technology but its importance varies depending on the use context, and (3) there is value in using design research methods that support understanding usability in the context of sustained use.
| S-EPMC10750233 | biostudies-literature
Project description:Seeking a more flexible and efficient production, additive manufacturing (AM) has emerged as a major player in the industrial field, streamlining the fabrication of custom tangible assets by directly 3D printing them. However, production still takes too long due to printing, but also due to the product design stage, in which the customer works together with an expert to create a 3D model of the targeted product by means of computer-aided design (CAD) software. Skipping intermediate agents and making customers responsible for the design process will reduce waiting times and speed up the manufacturing process. This work is conceived as a first step towards that optimized AM model, being aimed at bringing CAD tools closer to clients through an enhanced user experience, and consequently at simplifying pre-manufacturing design tasks. Specifically, as an alternative to the traditional user interface operated with the keyboard and mouse duo, standard in CAD and AM, the paper presents a comprehensive multi-touch interaction system conceived as a customer-centric human-machine interface. To depict the proposed solutions, we adopt furniture manufacturing as a case study and, supported by a CAD-like software prototype for 3D modeling of custom cabinets introduced in a previous work of the authors, we assess our approach's validity in terms of usability by conducting in-lab and remote user studies. The comparison between the designed multi-touch interaction and its desktop alternative yields promising results, showing improved performance and higher satisfaction of the end-user for the touch-based approach, that lay the groundwork for a smarter factory vision based on remotely-operated AM.
| S-EPMC7435946 | biostudies-literature
Project description:The success of smart homes is fundamentally dependent on their adoption and use by people in the context of daily life. This study investigated ways to control and adapt the technology to fulfill user daily needs, which are the active drivers of smart housing technology adoption. A framework of smart home services was developed by focusing on the practicability of each variable from the perspective of supporting user experience. By developing scenarios based on previous studies, we identified residents' behaviors and intentions regarding smart home technology and its use. Their issues were identified through the health problems and daily activities identified in the scenarios, and customized smart home services were developed for each resident based on technical solutions, space requirements, and design solutions. The main strength of this study is the adoption of user-centered methods to build a rich picture of the issues that affect households and the community related to the design, installation, and use of technology.
| S-EPMC7100148 | biostudies-literature
Project description:Despite pervasive findings pointing to its inextricable role in intervention implementation, context remains poorly understood in implementation science. Existing approaches for describing context (e.g., surveys, interviews) may be narrow in scope or superficial in their elicitation of contextual data. Thus, in-depth and multilevel approaches are needed to meaningfully describe the contexts into which interventions will be implemented. Moreover, many studies assess context without subsequently using contextual information to enhance implementation. To be useful for improving implementation, though, methods are needed to apply contextual information during implementation. In the case example presented in this paper, we embedded an ethnographic assessment of context within a user-centered design approach to describe implementation context and apply that information to promote implementation. We developed a patient-reported outcome measure-based clinical intervention to assess and address the pervasive unmet needs of young adults with cancer: the Needs Assessment & Service Bridge (NA-SB). In this paper, we describe the user-centered design process that we used to anticipate context modifications needed to deliver NA-SB and implementation strategies needed to facilitate its implementation. Our ethnographic contextual inquiry yielded a rich understanding of local implementation context and contextual variation across potential scale-up contexts. Other methods from user-centered design (i.e., translation tables and a design team prototyping workshop) allowed us to translate that information into specifications for NA-SB delivery and a plan for implementation. Embedding ethnographic methods within a user-centered design approach can help us to tailor interventions and implementation strategies to their contexts of use to promote implementation.
| S-EPMC8826991 | biostudies-literature
Project description:BACKGROUND:Patient portals are increasingly accepted as part of standard medical care. However, to date, most patient portals provide just passive access to medical data. The use of modern technology such as smartphones and data personalization algorithms offers the potential to make patient portals more person-centered and enabling. OBJECTIVE:The aim of this study is to share our experience in designing and developing a person-centered patient portal following a participatory stakeholder co-design approach. METHODS:Our stakeholder co-design approach comprised 6 core elements: (1) equal coleadership, including a cancer patient on treatment; (2) patient preference determination; (3) security, governance, and legal input; (4) continuous user evaluation and feedback; (5) continuous staff input; and (6) end-user testing. We incorporated person-centeredness by recognizing that patients should decide for themselves their level of medical data access, all medical data should be contextualized with explanatory content, and patient educational material should be personalized and timely. RESULTS:Using stakeholder co-design, we built, and are currently pilot-testing, a person-centered patient portal smartphone app called Opal. CONCLUSIONS:Inclusion of all stakeholders in the design and development of patient-facing software can help ensure that the necessary elements of person-centeredness, clinician acceptability, and informatics feasibility are achieved.
| S-EPMC6388099 | biostudies-literature
Project description:BackgroundFor the development of digital solutions, different aspects of user interface design must be taken into consideration. Different technologies, interaction paradigms, user characteristics and needs, and interface design components are some of the aspects that designers and developers should pay attention to when designing a solution. Many user interface design recommendations for different digital solutions and user profiles are found in the literature, but these recommendations have numerous similarities, contradictions, and different levels of detail. A detailed critical analysis is needed that compares, evaluates, and validates existing recommendations and allows the definition of a practical set of recommendations.ObjectiveThis study aimed to analyze and synthesize existing user interface design recommendations and propose a practical set of recommendations that guide the development of different technologies.MethodsBased on previous studies, a set of recommendations on user interface design was generated following 4 steps: (1) interview with user interface design experts; (2) analysis of the experts' feedback and drafting of a set of recommendations; (3) reanalysis of the shorter list of recommendations by a group of experts; and (4) refining and finalizing the list.ResultsThe findings allowed us to define a set of 174 recommendations divided into 12 categories, according to usability principles, and organized into 2 levels of hierarchy: generic (69 recommendations) and specific (105 recommendations).ConclusionsThis study shows that user interface design recommendations can be divided according to usability principles and organized into levels of detail. Moreover, this study reveals that some recommendations, as they address different technologies and interaction paradigms, need further work.
| S-EPMC9568819 | biostudies-literature
Project description:BACKGROUND:Patients are increasingly using mobile health (mHealth) apps to monitor their health and educate themselves about medical issues. Despite the increasing popularity of such apps, poor design and usability often lead to suboptimal continued use of these apps and subsequently to poor adherence to the behavior changes at which they are aimed. One solution to these design problems is for app developers to use user-centered design (UCD) principles to consider the context and needs of users during the development process. OBJECTIVE:This study aimed to present a case study on the design and development process for an mHealth app that uses virtual human technology (VHT) to encourage colorectal cancer (CRC) screening among patients aged 50 years and above. METHODS:We have first provided an overview of the project and discussed its utilization of VHT. We have then reviewed UCD principles and how they can be incorporated into the development of health apps. We have described how we used UCD processes during the app's development. We have then discussed the unique roles played by communication researchers, computer scientists, clinicians, and community participants in creating an mHealth app that is credible, usable, effective, and accessible to its target audience. RESULTS:The principles of UCD were woven throughout the project development, with researchers collecting feedback from patients and providers at all stages and using that feedback to improve the credibility, usability, effectiveness, and accessibility of the mHealth app. The app was designed in an iterative process, which encouraged feedback and improvement of the app and allowed teams from different fields to revisit topics and troubleshoot problems. CONCLUSIONS:Implementing a UCD process contributed to the development of an app, which not only reflected cross-disciplinary expertise but also the needs, wants, and concerns of patients.
| S-EPMC6530259 | biostudies-other
Project description:A major problem facing behavioral neuroscientists is a lack of unified, vendor-distributed data acquisition systems that allow stimulus presentation and behavioral monitoring while recording neural activity. Numerous systems perform one of these tasks well independently, but to our knowledge, a useful package with a straightforward user interface does not exist. Here we describe the development of a flexible, script-based user interface that enables customization for real-time stimulus presentation, behavioral monitoring and data acquisition. The experimental design can also incorporate neural microstimulation paradigms. We used this interface to deliver multimodal, auditory and visual (images or video) stimuli to a nonhuman primate and acquire single-unit data. Our design is cost-effective and works well with commercially available hardware and software. Our design incorporates a script, providing high-level control of data acquisition via a sequencer running on a digital signal processor to enable behaviorally triggered control of the presentation of visual and auditory stimuli. Our experiments were conducted in combination with eye-tracking hardware. The script, however, is designed to be broadly useful to neuroscientists who may want to deliver stimuli of different modalities using any animal model.
| S-EPMC3907162 | biostudies-literature
Project description:Virtual screening of large chemical libraries is essential to support computer-aided drug development, providing a rapid and low-cost approach for further experimental validation. However, existing computational packages are often for specialised users or platform limited. Previously, we developed VSpipe, an open-source semi-automated pipeline for structure-based virtual screening. We have now improved and expanded the initial command-line version into an interactive graphical user interface: VSpipe-GUI, a cross-platform open-source Python toolkit functional in various operating systems (e.g., Linux distributions, Windows, and Mac OS X). The new implementation is more user-friendly and accessible, and considerably faster than the previous version when AutoDock Vina is used for docking. Importantly, we have introduced a new compound selection module (i.e., spatial filtering) that allows filtering of docked compounds based on specified features at the target binding site. We have tested the new VSpipe-GUI on the Hepatitis C Virus NS3 (HCV NS3) protease as the target protein. The pocket-based and interaction-based modes of the spatial filtering module showed efficient and specific selection of ligands from the virtual screening that interact with the HCV NS3 catalytic serine 139.
| S-EPMC10889202 | biostudies-literature
Project description:BackgroundTo address challenges related to medication management in underserved settings, we developed a system for Prescription Management And General Inventory Control, or RxMAGIC, in collaboration with the Birmingham Free Clinic in Pittsburgh, Pennsylvania. RxMAGIC is an interoperable, web-based medication management system designed to standardize and streamline the dispensing practice and improve inventory control in a free clinic setting. This manuscript describes the processes used to design, develop, and deploy RxMAGIC.MethodsWe transformed data from previously performed mixed-methods needs assessment studies into functional user requirements using agile development methods. Requirements took the form of user stories that were prioritized to drive implementation of RxMAGIC as a web-application. A functional prototype was developed and tested to understand its perceived usefulness before developing a production system. Prior to deployment, we evaluated the usability of RxMAGIC with six users to diagnose potential interaction challenges that may be avoided through redesign. The results from this study were similarly prioritized and informed the final features of the production system.ResultsWe developed 45 user stories that acted as functional requirements to incrementally build RxMAGIC. Integrating with the electronic health record at the clinic was a requirement for deployment. We utilized health data standards to communicate with the existing order entry system; an outgoing electronic prescribing framework was leveraged to send prescription data to RxMAGIC. The results of the usability study were positive, with all tested features receiving a mean score of four or five (i.e. somewhat easy or easy, respectively) on a five-point Likert scale assessing ease of completion, thus demonstrating the system's simplicity and high learnability. RxMAGIC was deployed at the clinic in October 2016 over a two-week period.ConclusionsWe built RxMAGIC, an open-source, pharmacist-facing dispensary management information system that augments the pharmacist's ability to efficiently deliver medication services in a free clinic setting. RxMAGIC provides electronic dispensing and automated inventory management and alerting capabilities. We deployed RxMAGIC at the Birmingham Free Clinic and measured its usability with potential users. In future work, we plan to continue to measure the impact of RxMAGIC on pharmacist efficiency and satisfaction.
| S-EPMC6131751 | biostudies-literature