Browse
Submit Data
Databases
API
Help

Dataset Information

23 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

The full phase space dynamics of a magnetically levitated electromagnetic vibration harvester.

ABSTRACT: We consider the motion of an electromagnetic vibrational energy harvester (EMVEH) as function of the initial position and velocity and show that this displays a classical chaotic dynamical behavior. The EMVEH considered consists of three coaxial cylindrical permanent magnets and two coaxial coils. The polarities of the three magnets are chosen in such a way that the central magnet floats, with its lateral motion being prevented by enclosion in a hollow plastic tube. The motion of the floating magnet, caused by e.g. environmental vibrations, induces a current in the coils allowing electrical energy to be harvested. We analyze the behavior of the system using a numerical model employing experimentally verified expressions of the force between the magnets and the damping force between the floating magnet and the coils. We map out the phase space of the motion of the system with and without gravity, and show that this displays a fractal-like behavior and that certain driving frequencies and initial conditions allow a large power to be harvested, and that more stable states than two exists. Finally, we show that at leasts fifth order polynomial approximation is necessary to approximate the magnet-magnet force and correctly predict the system behavior.

SUBMITTER: Jensen TW

PROVIDER: S-EPMC8368241 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Parameter optimization analysis of rotary electromagnetic vibration energy harvester for performance enhancement under free vibration.

Project description:In this paper, three new important aspects of rotary electromagnetic vibration energy harvesting technology (RE-VEH) are concerned and investigated: (i) vibro-electric coupling mechanism of the RE-VEH system is studied through theoretical modeling; (ii) quantitative analysis of system parameters based on numerical simulation method is carried out for the optimal design of RE-VEH; and (iii) dynamic power output performance of the RE-VEH system in free vibration is discussed. The parameter adjusting methods of the RE-VEH system in free vibration mode are obtained through theoretical analysis and numerical simulation. The experimental results show that the power output performance of RE-VEH in free vibration mode matches the numerical simulation results. The simulation and experimental results show that the maximum voltage output and power output of the RE-VEH with different structure parameters under free vibration can be up to the level of 100∼101 V/watt. The above results indicate that RE-VEH in a free vibration environment has significant energy output performance.

| S-EPMC10558786 | biostudies-literature

Ultrafast rotation of magnetically levitated macroscopic steel spheres.

Project description:Our world is increasingly powered by electricity, which is largely converted to or from mechanical energy using electric motors. Several applications have driven the miniaturization of these machines, resulting in high rotational speeds. Although speeds of several hundred thousand revolutions per minute have been used industrially, we report the realization of an electrical motor reaching 40 million rpm to explore the underlying physical boundaries. Millimeter-scale steel spheres, which are levitated and accelerated by magnetic fields inside a vacuum, are used as a rotor. Circumferential speeds exceeding 1000 m/s and centrifugal accelerations of more than 4 × 108 times gravity were reached. The results open up new research possibilities, such as the testing of materials under extreme centrifugal load, and provide insights into the development of future electric drive systems.

| S-EPMC5756664 | biostudies-literature

Multi-omics analysis of magnetically levitated plasma biomolecules.

Project description:We recently discovered that superparamagnetic iron oxide nanoparticles (SPIONs) can levitate plasma biomolecules in the magnetic levitation (MagLev) system and cause formation of ellipsoidal biomolecular bands. To better understand the composition of the levitated biomolecules in various bands, we comprehensively characterized them by multi-omics analyses. To probe whether the biomolecular composition of the levitated ellipsoidal bands correlates with the health of plasma donors, we used plasma from individuals who had various types of multiple sclerosis (MS), as a model disease with significant clinical importance. Our findings reveal that, while the composition of proteins does not show much variability, there are significant differences in the lipidome and metabolome profiles of each magnetically levitated ellipsoidal band. By comparing the lipidome and metabolome compositions of various plasma samples, we found that the levitated biomolecular ellipsoidal bands do contain information on the health status of the plasma donors. More specifically, we demonstrate that there are particular lipids and metabolites in various layers of each specific plasma pattern that significantly contribute to the discrimination of different MS subtypes, i.e., relapsing-remitting MS (RRMS), secondary-progressive MS (SPMS), and primary-progressive MS (PPMS). These findings will pave the way for utilization of MagLev of biomolecules in biomarker discovery for identification of diseases and discrimination of their subtypes.

| S-EPMC9750732 | biostudies-literature

Phase-dependent dynamic potential of magnetically coupled two-degree-of-freedom bistable energy harvester.

Project description:A system of magnetically coupled oscillators has been recently considered as a promising compact structure to integrate multiple bistable energy harvesters (BEHs), but its design is not straightforward owing to its varying potential energy pattern, which has not been understood completely yet. This study introduces the concept of phase-dependent dynamic potential in a magnetically coupled BEH system with two degrees of freedom (DOFs) to explain the underlying principle of the complicated dynamics of the system. Through theoretical simulations and analyses, two distinct dynamic regimes, called the out-of-phase and in-phase mode regimes in this report, are found to exist in the frequency regions of the 1st and 2nd primary intrawell resonances. For the out-of-phase mode regime, the frequency displacement (and output power) responses of the 2-DOF BEH system exhibit typical double-well dynamics, whereas for the in-phase mode regime, only single-well dynamics is observed though the system is statically bistable. These dynamic regimes are also revealed to be caused by the difference in the dynamic potential energy trajectories propagating on a high-dimensional potential energy surface. The present approach to the dynamics of the 2-DOF BEH system can be extended and applied to higher-DOF systems, which sheds light on compact and efficient designs of magnetically coupled BEH chain structures.

| S-EPMC5039668 | biostudies-literature

A flexible electromagnetic wave-electricity harvester.

Project description:Developing an ultimate electromagnetic (EM)-absorbing material that can not only dissipate EM energy but also convert the generated heat into electricity is highly desired but remains a significant challenge. Here, we report a hybrid Sn@C composite with a biological cell-like splitting ability to address this challenge. The composite consisting of Sn nanoparticles embedded within porous carbon would split under a cycled annealing treatment, leading to more dispersed nanoparticles with an ultrasmall size. Benefiting from an electron-transmitting but a phonon-blocking structure created by the splitting behavior, an EM wave-electricity device constructed by the optimum Sn@C composite could achieve an efficiency of EM to heat at widely used frequency region and a maximum thermoelectric figure of merit of 0.62 at 473 K, as well as a constant output voltage and power under the condition of microwave radiation. This work provides a promising solution for solving EM interference with self-powered EM devices.

| S-EPMC7864982 | biostudies-literature

Coalescence Dynamics of Acoustically Levitated Droplets.

Project description:The contactless coalescence of a droplet is of paramount importance for physical and industrial applications. This paper describes a coalescence method to be used mid-air via acoustic levitation using an ultrasonic phased array system. Acoustic levitation using ultrasonic phased arrays provides promising lab-on-a-drop applications, such as transportation, coalescence, mixing, separation, evaporation, and extraction in a continuous operation. The mechanism of droplet coalescence in mid-air may be better understood by experimentally and numerically exploring the droplet dynamics immediately before the coalescence. In this study, water droplets were experimentally levitated, transported, and coalesced by controlled acoustic fields. We observed that the edges of droplets deformed and attracted each other immediately before the coalescence. Through image processing, the radii of curvature of the droplets were quantified and the pressure difference between the inside and outside a droplet was simulated to obtain the pressure and velocity information on the droplet's surface. The results revealed that the sound pressure acting on the droplet clearly decreased before the impact of the droplets. This pressure on the droplets was quantitatively analyzed from the experimental data. Our experimental and numerical results provide deeper physical insights into contactless droplet manipulation for futuristic lab-on-a-drop applications.

| S-EPMC7231308 | biostudies-literature

Programmable Reflection-Transmission Shared-Aperture Metasurface for Real-Time Control of Electromagnetic Waves in Full Space.

Project description:Recently, programmable metamaterials or metasurfaces have been developed to dynamically edit electromagnetic waves for realizing different functions in the same platform. However, the proposed programmable metasurfaces can only control reflected or transmitted wavefronts in half-space. Here, a "Janus" digital coding metasurface with the capabilities to program various electromagnetic functions in the reflected (with R-codes) and transmitted (with T-codes) waves simultaneously is presented. Three PIN diodes are employed to design the metaparticle, and the state of the PIN diodes can be switched to change the reflected and transmitted phases independently. Three schemes achieved by the proposed programmable metasurface are provided as illustrative examples, including anomalous deflections, beam focusing, and scattering reduction in the full space. As a proof-of-concept, a prototype composed of 10 × 20 metaparticles is fabricated and the measured results are in good agreement with the designs and numerical results, validating the full-space modulations enabled by the programmable metasurface. It is expected that the new programmable metasurface can broaden the applications in stealth technologies, imaging systems, and the next generation of wireless communications.

| S-EPMC8336522 | biostudies-literature

Dynamics of levitated objects in acoustic vortex fields.

Project description:Acoustic levitation in gaseous media provides a tool to process solid and liquid materials without the presence of surfaces such as container walls and hence has been used widely in chemical analysis, high-temperature processing, drop dynamics and bioreactors. To date high-density objects can only be acoustically levitated in simple standing-wave fields. Here we demonstrate the ability of a small number of peripherally placed sources to generate acoustic vortex fields and stably levitate a wide range of liquid and solid objects. The forces exerted by these acoustic vortex fields on a levitated water droplet are observed to cause a controllable deformation of the droplet and/or oscillation along the vortex axis. Orbital angular momentum transfer is also shown to rotate a levitated object rapidly and the rate of rotation can be controlled by the source amplitude. We expect this research can increase the diversity of acoustic levitation and expand the application of acoustic vortices.

| S-EPMC5540917 | biostudies-literature

Broadband Energy Harvester Using Non-linear Polymer Spring and Electromagnetic/Triboelectric Hybrid Mechanism.

Project description:Over the years, several approaches have been devised to widen the operating bandwidth, but most of them can only be triggered at high accelerations. In this work, we investigate a broadband energy harvester based on combination of non-linear stiffening effect and multimodal energy harvesting to obtain high bandwidth over wide range of accelerations (0.1 g-2.0 g). In order to achieve broadband behavior, a polymer based spring exhibiting multimodal energy harvesting is used. Besides, non-linear stiffening effect is introduced by using mechanical stoppers. At low accelerations (<0.5 g), the nearby mode frequencies of polymer spring contribute to broadening characteristics, while proof mass engages with mechanical stoppers to introduce broadening by non-linear stiffening at higher accelerations. The electromagnetic mechanism is employed in this design to enhance its output at low accelerations when triboelectric output is negligible. Our device displays bandwidth of 40 Hz even at low acceleration of 0.1 g and it is increased up to 68 Hz at 2 g. When non-linear stiffening is used along with multimodal energy-harvesting, the obtained bandwidth increases from 23 Hz to 68 Hz with percentage increment of 295% at 1.8 g. Further, we have demonstrated the triboelectric output measured as acceleration sensing signals in terms of voltage and current sensitivity of 4.7 Vg-1 and 19.7 nAg-1, respectively.

| S-EPMC5264648 | biostudies-literature

An experimental study on a piezoelectric vibration energy harvester for self-powered cardiac pacemakers.

Project description:BackgroundOver the past half-century, cardiac pacing technology has been reported. In this study, we designed, prepared, and tested the performance of a self-energized cardiac pacemaker driven by piezoelectric vibration energy collection technology, which converts the kinetic energy of the heart into electrical energy. A record in vivo output current of 54 nA was obtained in an adult rat by the implanted piezoelectric transducer.MethodsFirst, the kinetic energy of the heart was collected by an implanted piezoelectric energy collector and supplied to the cardiac pacemaker. Then, the heart was pierced from the outside, and the cardiac tissue was stimulated by the pacing electrode, and self-powered pacing.ResultsThe average voltage and average current of the piezoelectric vibration energy harvester in vitro were 3.5 mV and 60 nA, respectively. After implantation of the device into rats, the average voltage and current were measured immediately and reached 3.2 mV and 54 nA, respectively. The average voltage and average current reached 3.0 mV and 48 nA after 1 week, and 2.1 mV and 31 nA after 12 weeks. The electrical performance of the self-powered pacemaker in this study is based on piezoelectric energy collection technology. The implanted piezoelectric vibration energy collector drives the pacemaker to generate electrical pulses, which directly stimulates the myocardial tissue through the epicardium to achieve the pacing effect.ConclusionsThese results evidence the feasibility of the in-situ epicardial pacing strategy. This research will promote the design and development of self-powered cardiac pacemakers.

| S-EPMC8184449 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data