Construction of 1D Heterostructure NiCo@C/ZnO Nanorod with Enhanced Microwave Absorption.
Ontology highlight
ABSTRACT:
SUBMITTER: Wang J
PROVIDER: S-EPMC8368508 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Effective and bright light-emitting-diodes (LEDs) have attracted broad interests in fundamental research and industrial application, especially on short wavelength LEDs. In this paper, a well aligned ZnO nanorod arrays grown on the p-GaN substrate to form a heterostructured light-emitting diode and Al nanoparticles (NPs) were decorated to improve the electroluminescence performance. More than 30-folds enhancement of the electroluminescence intensity was obtained compared with the device without Al NPs decoration. The investigation on the stable and transient photoluminescence spectraof the ZnO nanorod arrays before and after Al NPs decoration demonstrated that the metal surface plasmon resonance coupling with excitons of ZnO leads to the enhancement of the internal quantum efficiency (IQE). Our results provide aneffective approach to design novel optoelectronic devices such as light-emitting diodes and plasmonic nanolasers.
| S-EPMC4867586 | biostudies-other
Project description:The 3D hollow hierarchical architectures tend to be designed for inhibiting stack of MXene flakes to obtain satisfactory lightweight, high-efficient and broadband absorbers. Herein, the hollow NiCo compound@MXene networks were prepared by etching the ZIF 67 template and subsequently anchoring the Ti3C2Tx nanosheets through electrostatic self-assembly. The electromagnetic parameters and microwave absorption property can be distinctly or slightly regulated by adjusting the filler loading and decoration of Ti3C2Tx nanoflakes. Based on the synergistic effects of multi-components and special well-constructed structure, NiCo layered double hydroxides@Ti3C2Tx (LDHT-9) absorber remarkably achieves unexpected effective absorption bandwidth (EAB) of 6.72 GHz with a thickness of 2.10 mm, covering the entire Ku-band. After calcination, transition metal oxide@Ti3C2Tx (TMOT-21) absorber near the percolation threshold possesses minimum reflection loss (RLmin) value of - 67.22 dB at 1.70 mm within a filler loading of only 5 wt%. This work enlightens a simple strategy for constructing MXene-based composites to achieve high-efficient microwave absorbents with lightweight and tunable EAB.
| S-EPMC8505608 | biostudies-literature
Project description:Transition metal sulfides have attracted a lot of attention as potential oxygen evolution reaction (OER) catalysts. Bimetallic sulfide possesses superior physicochemical properties due to the synergistic effect between bimetallic cations. By introducing a metal-semiconductor interface, the physicochemical properties of transition metal sulfide can be further improved. Using the solvothermal method, Au@NiCo2S4 core-shell heterostructure nanoparticles (NPs) and bare NiCo2S4 NPs were prepared. The measurement of the OER catalytic performance showed that the catalytic activity of Au@NiCo2S4 core-shell heterostructure was enhanced compared to bare NiCo2S4 NPs. At the current density of 10 mA cm-2, the overpotential of Au@NiCo2S4 (299 mV) is lower than that of bare NiCo2S4 (312 mV). The Tafel slope of Au@NiCo2S4 (44.5 mV dec-1) was reduced compared to that of bare NiCo2S4 (49.1 mV dec-1), indicating its faster reaction kinetics. Detailed analysis of its electronic structure, chemical state, and electrochemical impedance indicates that the enhanced OER catalytic performances of bare Au@NiCo2S4 core-shell NPs were a result of its increased proportion of high-valance Ni/Co cations, and its increased electronic conductivity. This work provides a feasible method to improve OER catalytic performance by constructing a metal-semiconductor core-shell heterostructure.
| S-EPMC7221621 | biostudies-literature
Project description:The present work reports the influence of zinc oxide (ZnO) seed layer annealing temperature on structural, optical and electrical properties of ZnO nanorod arrays, synthesized by hydrothermal method assisted by microwave radiation, to be used as UV sensors. The ZnO seed layer was produced using the spin-coating method and several annealing temperatures, ranging from 100 to 500 °C, have been tested. X-ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM) and spectrophotometry measurements have been used to investigate the structure, morphology, and optical properties variations of the produced ZnO nanorod arrays regarding the seed layer annealing temperatures employed. After the growth of ZnO nanorod arrays, the whole structure was tested as UV sensors, showing an increase in the sensitivity with the increase of seed layer annealing temperature. The UV sensor response of ZnO nanorod arrays produced with the seed layer annealed temperature of 500 °C was 50 times superior to the ones produced with a seed layer annealed at 100 °C.
| S-EPMC5502992 | biostudies-other
Project description:Operating the dry reforming reaction photocatalytically presents an opportunity to produce commodity chemicals from two greenhouse gases, carbon dioxide and methane, however, the top-performing photocatalysts presented in the academic literature invariably rely on the use of precious metals. In this work, we demonstrate enhanced photocatalytic dry reforming performance through surface basicity modulation of a Ni-CeO2 photocatalyst by selectively phosphating the surface of the CeO2 nanorod support. An optimum phosphate content is observed, which leads to little photoactivity loss and carbon deposition over a 50-hour reaction period. The enhanced activity is attributed to the Lewis basic properties of the PO43- groups which improve CO2 adsorption and facilitate the formation of small nickel metal clusters on the support surface, as well as the mechanical stability of CePO4. A hybrid photochemical-photothermal reaction mechanism is demonstrated by analyzing the wavelength-dependent photocatalytic activities. The activities, turnover numbers, quantum efficiencies, and energy efficiencies are shown to be on par with other dry-reforming photocatalysts that use noble metals, representing a step forward in understanding how to stabilize ignoble nickel-based dry reforming photocatalysts. The challenges associated with comparing the performance of photocatalysts reported in the academic literature are also commented on.
| S-EPMC10015045 | biostudies-literature
Project description:Vertically aligned gold nanorod arrays have attracted much attention for their fascinating optical properties. Different from longitudinal surface plasmon wavelength (LSPW) and edge-to-edge spacing of gold nanorods, the role of gold nanorod diameter in plasmonic enhancement ability of vertical gold nanorod arrays has rarely been explored. In this work, we selected gold nanorods with similar LSPW but two different diameters (22 and 41 nm), the optical properties of which are dominated by absorption and scattering cross sections, respectively. The vertically aligned arrays of these gold nanorods formed by evaporation self-assembly are coupled with nonlinear ZnO nanocrystal films spin-coated on their surfaces. It was found that the gold nanorod array with a larger diameter can enhance the second harmonic generation (SHG) of ZnO nanofilm by a factor of 27.0, while it is about 7.3 for the smaller gold nanorod array. Theoretical simulations indicate that such stronger enhancement of the larger vertical gold nanorod array compared with the smaller one is due to its stronger scattering ability and greater extent of near-field enhancement at SHG fundamental wavelength. Our work shows that the diameter of gold nanorods is also an important factor to be considered in realizing strong plasmon enhancement of vertically aligned gold nanorod arrays.
| S-EPMC8539005 | biostudies-literature
Project description:A combination of a special micro-nanostructure and multiple components has been proven as an effective strategy to strengthen the microwave attenuation capacity. In this work, one-dimensional MoO2/N-doped carbon (NC) nanowires with a heterostructure have been successfully prepared by utilizing mild in situ chemical oxidative polymerization and pyrolysis treatment. After compounding them with a thermoplastic polyurethane (TPU) matrix, the flexible composites exhibit tunable wave absorbing performance by modulating the filler loading of MoO2/NC heteronanowires. Experimental results demonstrate that the minimum reflection loss value of the MoO2/NC-TPU hybrid is up to -35.0 dB at 8.37 GHz under a thickness of only 2.3 mm with 40 wt% filler amounts. Moreover, the effective absorption bandwidth enables 3.26 GHz to be achieved (8.49-11.75 GHz) when the thickness changes to 2.0 mm, covering almost the whole X-band. Meanwhile, when the filler loading becomes 30 wt%, dual-absorption peaks appear. The relevant absorption mechanism is mainly attributed to the dielectric loss including strong dipolar/interfacial polarizations, Debye relaxation loss and multiple reflection and scattering.
| S-EPMC8981422 | biostudies-literature
Project description:Microwave absorbents with specific morphology and structure have fundamental significance for tuning microwave absorption (MA). Herein, N-doped carbon sphere nanoparticles and hollow capsules were successfully fabricated via oxidative polymerization of dopamine in different mixed solutions, without any template preparation or etching process. Compared to solid particles, the microwave absorbents consisting of N-doped carbon with a hollow structure showed enormously enhanced MA performance, exhibiting a broad effective absorption bandwidth (from 12.7 GHz to 17.9 GHz) and a minimum reflection loss of -27.2 dB with a sample thickness of 2.0 mm. This work paves an attractive way for simple and eco-friendly preparation of advanced light weight microwave absorbents.
| S-EPMC8695094 | biostudies-literature
Project description:Two-dimensional transition metal carbides and nitrides (MXene) have emerged as promising candidates for microwave absorption (MA) materials. However, they also have some drawbacks, such as poor impedance matching, high self-stacking tendency, and high density. To tackle these challenges, MXene nanosheets were incorporated into polyacrylonitrile (PAN) nanofibers and subsequently assembled into a three-dimensional (3D) network structure through PAN carbonization, yielding MXene/C aerogels. The 3D network effectively extends the path of microcurrent transmission, leading to enhanced conductive loss of electromagnetic (EM) waves. Moreover, the aerogel's rich pore structure significantly improves the impedance matching while effectively reducing the density of the MXene-based absorbers. EM parameter analysis shows that the MXene/C aerogels exhibit a minimum reflection loss (RLmin) value of - 53.02 dB (f = 4.44 GHz, t = 3.8 mm), and an effective absorption bandwidth (EAB) of 5.3 GHz (t = 2.4 mm, 7.44-12.72 GHz). Radar cross-sectional (RCS) simulations were employed to assess the radar stealth effect of the aerogels, revealing that the maximum RCS reduction value of the perfect electric conductor covered by the MXene/C aerogel reaches 12.02 dB m2. In addition to the MA performance, the MXene/C aerogel also demonstrates good thermal insulation performance, and a 5-mm-thick aerogel can generate a temperature gradient of over 30 °C at 82 °C. This study provides a feasible design approach for creating lightweight, efficient, and multifunctional MXene-based MA materials.
| S-EPMC10412520 | biostudies-literature
Project description:The use of photocatalysts without noble metals is of great interest in the industrial field for the degradation of organic pollutants. In this study, a CuO/ZnO heterostructure was synthesized using the microwave hydrothermal method and characterized using various analytical techniques. The synthesized CuO/ZnO photocatalyst exhibited a low bandgap energy of 2.4 eV, enabling efficient visible light absorption. The photocatalytic activity of the CuO/ZnO heterostructure was evaluated for the degradation of Methyl Orange (MO) dye and showed a high degradation efficiency of 99 % due to its excellent electron-hole charge separation. The biological activity of the synthesized CuO/ZnO catalyst was further investigated through protein docking studies, which showed promising results. The CuO/ZnO was also evaluated for its anticancer and antibacterial properties. It exhibited effective anticancer activity against prostate cancer cells (PC-3) in a dose-dependent manner, with an IC50 value of 6.87 ± 8. In addition, it demonstrated potent antibacterial activity against Escherichia coli, Staphylococcus aureus, Bacillus cereous and Pseudomonas aeruginola. The results of this study demonstrate the potential of CuO/ZnO heterostructures as promising materials for various applications in the fields of photocatalysis, biomedicine and antimicrobial materials. Future research in this area will focus on further optimizing the properties of the CuO/ZnO heterostructure to enhance its performance in these applications.
| S-EPMC10703636 | biostudies-literature