Automated analysis of bacterial flow cytometry data with FlowGateNIST.
Ontology highlight
ABSTRACT:
SUBMITTER: Ross D
PROVIDER: S-EPMC8372958 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Traditional methods for flow cytometry (FCM) data processing rely on subjective manual gating. Recently, several groups have developed computational methods for identifying cell populations in multidimensional FCM data. The Flow Cytometry: Critical Assessment of Population Identification Methods (FlowCAP) challenges were established to compare the performance of these methods on two tasks: (i) mammalian cell population identification, to determine whether automated algorithms can reproduce expert manual gating and (ii) sample classification, to determine whether analysis pipelines can identify characteristics that correlate with external variables (such as clinical outcome). This analysis presents the results of the first FlowCAP challenges. Several methods performed well as compared to manual gating or external variables using statistical performance measures, which suggests that automated methods have reached a sufficient level of maturity and accuracy for reliable use in FCM data analysis.
| S-EPMC3906045 | biostudies-literature
Project description:BackgroundIn a high throughput setting, effective flow cytometry data analysis depends heavily on proper data preprocessing. While usual preprocessing steps of quality assessment, outlier removal, normalization, and gating have received considerable scrutiny from the community, the influence of data transformation on the output of high throughput analysis has been largely overlooked. Flow cytometry measurements can vary over several orders of magnitude, cell populations can have variances that depend on their mean fluorescence intensities, and may exhibit heavily-skewed distributions. Consequently, the choice of data transformation can influence the output of automated gating. An appropriate data transformation aids in data visualization and gating of cell populations across the range of data. Experience shows that the choice of transformation is data specific. Our goal here is to compare the performance of different transformations applied to flow cytometry data in the context of automated gating in a high throughput, fully automated setting. We examine the most common transformations used in flow cytometry, including the generalized hyperbolic arcsine, biexponential, linlog, and generalized Box-Cox, all within the BioConductor flowCore framework that is widely used in high throughput, automated flow cytometry data analysis. All of these transformations have adjustable parameters whose effects upon the data are non-intuitive for most users. By making some modelling assumptions about the transformed data, we develop maximum likelihood criteria to optimize parameter choice for these different transformations.ResultsWe compare the performance of parameter-optimized and default-parameter (in flowCore) data transformations on real and simulated data by measuring the variation in the locations of cell populations across samples, discovered via automated gating in both the scatter and fluorescence channels. We find that parameter-optimized transformations improve visualization, reduce variability in the location of discovered cell populations across samples, and decrease the misclassification (mis-gating) of individual events when compared to default-parameter counterparts.ConclusionsOur results indicate that the preferred transformation for fluorescence channels is a parameter- optimized biexponential or generalized Box-Cox, in accordance with current best practices. Interestingly, for populations in the scatter channels, we find that the optimized hyperbolic arcsine may be a better choice in a high-throughput setting than current standard practice of no transformation. However, generally speaking, the choice of transformation remains data-dependent. We have implemented our algorithm in the BioConductor package, flowTrans, which is publicly available.
| S-EPMC3243046 | biostudies-literature
Project description:Advancements in flow cytometers with capability to measure 15 or more parameters have enabled us to characterize cell populations at unprecedented levels of detail. Beyond discovery research, there is now a growing demand to dive deeper into evaluating the immune response in clinical trials for immune modulating compounds. However, for high-volume, complex flow cytometry data generated in clinical trials, conventional manual gating remains the standard of practice. Traditional manual gating is resource intense and becomes a bottleneck and an impractical method to complete high volumes of flow cytometry data analysis. Current efforts to automate "manual gating" have shown that computational algorithms can facilitate the analysis of daunting multi-parameter data; however, a greater degree of precision in comparison with traditional manual gating is needed for wide-scale adoption of automated gating methods. In an effort to more closely follow the manual gating process, our automated gating pipeline was created to include negative controls (Fluorescence Minus One [FMO]) to enhance the reliability of gate placement. We demonstrate that use of an automated pipeline, heavily relying on FMO controls for population discrimination, can analyze multi-parameter, large-scale clinical datasets with comparable precision and accuracy to traditional manual gating.
| S-EPMC6448119 | biostudies-literature
Project description:While meta-analysis has demonstrated increased statistical power and more robust estimations in studies, the application of this commonly accepted methodology to cytometry data has been challenging. Different cytometry studies often involve diverse sets of markers. Moreover, the detected values of the same marker are inconsistent between studies due to different experimental designs and cytometer configurations. As a result, the cell subsets identified by existing auto-gating methods cannot be directly compared across studies. We developed MetaCyto for automated meta-analysis of both flow and mass cytometry (CyTOF) data. By combining clustering methods with a silhouette scanning method, MetaCyto is able to identify commonly labeled cell subsets across studies, thus enabling meta-analysis. Applying MetaCyto across a set of ten heterogeneous cytometry studies totaling 2,926 samples enabled us to identify multiple cell populations exhibiting differences in abundance between demographic groups. Software is released to the public through Bioconductor (http://bioconductor.org/packages/release/bioc/html/MetaCyto.html).
| S-EPMC6583920 | biostudies-literature
Project description:Flow cytometry is widely used within the manufacturing of cell and gene therapies to measure and characterise cells. Conventional manual data analysis relies heavily on operator judgement, presenting a major source of variation that can adversely impact the quality and predictive potential of therapies given to patients. Computational tools have the capacity to minimise operator variation and bias in flow cytometry data analysis; however, in many cases, confidence in these technologies has yet to be fully established mirrored by aspects of regulatory concern. Here, we employed synthetic flow cytometry datasets containing controlled population characteristics of separation, and normal/skew distributions to investigate the accuracy and reproducibility of six cell population identification tools, each of which implement different unsupervised clustering algorithms: Flock2, flowMeans, FlowSOM, PhenoGraph, SPADE3 and SWIFT (density-based, k-means, self-organising map, k-nearest neighbour, deterministic k-means, and model-based clustering, respectively). We found that outputs from software analysing the same reference synthetic dataset vary considerably and accuracy deteriorates as the cluster separation index falls below zero. Consequently, as clusters begin to merge, the flowMeans and Flock2 software platforms struggle to identify target clusters more than other platforms. Moreover, the presence of skewed cell populations resulted in poor performance from SWIFT, though FlowSOM, PhenoGraph and SPADE3 were relatively unaffected in comparison. These findings illustrate how novel flow cytometry synthetic datasets can be utilised to validate a range of automated cell identification methods, leading to enhanced confidence in the data quality of automated cell characterisations and enumerations.
| S-EPMC8955358 | biostudies-literature
Project description:BackgroundAs a high-throughput technology that offers rapid quantification of multidimensional characteristics for millions of cells, flow cytometry (FCM) is widely used in health research, medical diagnosis and treatment, and vaccine development. Nevertheless, there is an increasing concern about the lack of appropriate software tools to provide an automated analysis platform to parallelize the high-throughput data-generation platform. Currently, to a large extent, FCM data analysis relies on the manual selection of sequential regions in 2-D graphical projections to extract the cell populations of interest. This is a time-consuming task that ignores the high-dimensionality of FCM data.ResultsIn view of the aforementioned issues, we have developed an R package called flowClust to automate FCM analysis. flowClust implements a robust model-based clustering approach based on multivariate t mixture models with the Box-Cox transformation. The package provides the functionality to identify cell populations whilst simultaneously handling the commonly encountered issues of outlier identification and data transformation. It offers various tools to summarize and visualize a wealth of features of the clustering results. In addition, to ensure its convenience of use, flowClust has been adapted for the current FCM data format, and integrated with existing Bioconductor packages dedicated to FCM analysis.ConclusionflowClust addresses the issue of a dearth of software that helps automate FCM analysis with a sound theoretical foundation. It tends to give reproducible results, and helps reduce the significant subjectivity and human time cost encountered in FCM analysis. The package contributes to the cytometry community by offering an efficient, automated analysis platform which facilitates the active, ongoing technological advancement.
| S-EPMC2701419 | biostudies-literature
Project description:We introduce a new cell population score called SpecEnr (specific enrichment) and describe a method that discovers robust and accurate candidate biomarkers from flow cytometry data. Our approach identifies a new class of candidate biomarkers we define as driver cell populations, whose abundance is associated with a sample class (e.g., disease), but not as a result of a change in a related population. We show that the driver cell populations we find are also easily interpretable using a lattice-based visualization tool. Our method is implemented in the R package flowGraph, freely available on GitHub (github.com/aya49/flowGraph) and on BioConductor.
| S-EPMC8810629 | biostudies-literature
Project description:Modern flow cytometry systems can be coupled to plate readers for high-throughput acquisition. These systems allow hundreds of samples to be analyzed in a single day. Quality control of the data remains challenging, however, and is further complicated when a large number of parameters is measured in an experiment. Our examination of 29,228 publicly available FCS files from laboratories worldwide indicates 13.7% have a fluorescence anomaly. In particular, fluorescence measurements for a sample over the collection time may not remain stable due to fluctuations in fluid dynamics; the impact of instabilities may differ between samples and among parameters. Therefore, we hypothesized that tracking cell populations (which represent a summary of all parameters) in centered log ratio space would provide a sensitive and consistent method of quality control. Here, we present flowClean, an algorithm to track subset frequency changes within a sample during acquisition, and flag time periods with fluorescence perturbations leading to the emergence of false populations. Aberrant time periods are reported as a new parameter and added to a revised data file, allowing users to easily review and exclude those events from further analysis. We apply this method to proof-of-concept datasets and also to a subset of data from a recent vaccine trial. The algorithm flags events that are suspicious by visual inspection, as well as those showing more subtle effects that might not be consistently flagged by investigators reviewing the data manually, and out-performs the current state-of-the-art. flowClean is available as an R package on Bioconductor, as a module on the free-to-use GenePattern web server, and as a plugin for FlowJo X. © 2016 International Society for Advancement of Cytometry.
| S-EPMC5522377 | biostudies-literature
Project description:Flow cytometry is an important technology for the study of microbial communities. It grants the ability to rapidly generate phenotypic single-cell data that are both quantitative, multivariate and of high temporal resolution. The complexity and amount of data necessitate an objective and streamlined data processing workflow that extends beyond commercial instrument software. No full overview of the necessary steps regarding the computational analysis of microbial flow cytometry data currently exists. In this review, we provide an overview of the full data analysis pipeline, ranging from measurement to data interpretation, tailored toward studies in microbial ecology. At every step, we highlight computational methods that are potentially useful, for which we provide a short nontechnical description. We place this overview in the context of a number of open challenges to the field and offer further motivation for the use of standardized flow cytometry in microbial ecology research.
| S-EPMC7820666 | biostudies-literature
Project description:BACKGROUND: Flow cytometry is a widely used analytical technique for examining microscopic particles, such as cells. The Flow Cytometry Standard (FCS) was developed in 1984 for storing flow data and it is supported by all instrument and third party software vendors. However, FCS does not capture the full scope of flow cytometry (FCM)-related data and metadata, and data standards have recently been developed to address this shortcoming. FINDINGS: The Data Standards Task Force (DSTF) of the International Society for the Advancement of Cytometry (ISAC) has developed several data standards to complement the raw data encoded in FCS files. Efforts started with the Minimum Information about a Flow Cytometry Experiment, a minimal data reporting standard of details necessary to include when publishing FCM experiments to facilitate third party understanding. MIFlowCyt is now being recommended to authors by publishers as part of manuscript submission, and manuscripts are being checked by reviewers and editors for compliance. Gating-ML was then introduced to capture gating descriptions - an essential part of FCM data analysis describing the selection of cell populations of interest. The Classification Results File Format was developed to accommodate results of the gating process, mostly within the context of automated clustering. Additionally, the Archival Cytometry Standard bundles data with all the other components describing experiments. Here, we introduce these recent standards and provide the very first example of how they can be used to report FCM data including analysis and results in a standardized, computationally exchangeable form. CONCLUSIONS: Reporting standards and open file formats are essential for scientific collaboration and independent validation. The recently developed FCM data standards are now being incorporated into third party software tools and data repositories, which will ultimately facilitate understanding and data reuse.
| S-EPMC3060130 | biostudies-literature