Dataset Information

Preparation of feed with metal oxide nanoparticles for nanomaterial dietary exposure to fish and use in OECD TG 305.

ABSTRACT: The first step of nanomaterial accumulation in the aquatic environment is the uptake of particulate material. For substances with very low water solubility, exposure via water may be of limited relevance in comparison to the dietary route. The OECD Test Guideline 305 for bioaccumulation testing in fish using dietary exposure recommends to add substances to fish food following methodologies normally used in aquaculture (e.g. with a corn or fish oil vehicle). The feasibility of using such an approach for the testing of manufactured nanomaterials (MNs), due to their unique physical characteristics and solubility, needs to be investigated. In this study an easy, cost-effective method to prepare metal oxide nanoparticle (NP) spiked feed to give the required dietary exposure concentration to fish is described. Metal oxide NP (CeO₂,TiO₂ and ZnO) dispersions were prepared in oil (sunflower or olive oil) and used to soak fish feed pellets. NP surface deposition and homogeneity of distribution were analysed and confirmed. Discrepancies between nominal and measured concentrations highlighted the need to measure the achieved concentration in MN-spiked feed. The present method provides stable concentrations for bioaccumulation testing of MNs in fish through the dietary route. A method for•Fish feed preparation using nanomaterial-oil suspensions.•Homogenous spiking of nanomaterials on feed.•Nanomaterials stably maintained on feed immersed in water until eaten by fish.

SUBMITTER: Bermejo-Nogales A

PROVIDER: S-EPMC8374479 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Similar Datasets

Project description:Advances in aerosol technology over the past 10 years have enabled the generation and design of ultrafine nanoscale materials for many applications. A key new method is flame spray pyrolysis (FSP), which produces particles by pyrolyzing a precursor solution in the gas phase. FSP is a highly versatile technique for fast, single-step, scalable synthesis of nanoscale materials. New innovations in particle synthesis using FSP technology, including variations in precursor chemistry, have enabled flexible, dry synthesis of loosely agglomerated, highly crystalline ultrafine powders (porosity ≥ 90%) of binary, ternary, and mixed-binary-and-ternary oxides. FSP can fulfill much of the increasing demand, especially in biological applications, for particles with specific material composition, high purity, and high crystallinity. In this Account, we describe a strategy for creating nanoparticle libraries (pure or Fedoped ZnO or TiO₂) utilizing FSP and using these libraries to test hypotheses related to the particles' toxicity. Our innovation lies in the overall integration of the knowledge we have developed in the last 5 years in (1) synthesizing nanomaterials to address specific hypotheses, (2) demonstrating the electronic properties that cause the material toxicity, (3) understanding the reaction mechanisms causing the toxicity, and (4) extracting from in vitro testing and in vivo testing in terrestrial and marine organisms the essential properties of safe nanomaterials. On the basis of this acquired knowledge, we further describe how the dissolved metal ion from these materials (Zn²⁺ in this Account) can effectively bind with different cell constituents, causing toxicity. We use Fe-S protein clusters as an example of the complex chemical reactions taking place after free metal ions migrate into the cells. As a second example, TiO₂ is an active material in the UV range that exhibits photocatalytic behavior. The induction of electron-hole (e⁻/h⁺) pairs followed by free radical production is a key mechanism for biological injury. We show that decreasing the bandgap energy increases the phototoxicity in the presence of near-visible light. We present in detail the mechanism of electron transfer in biotic and abiotic systems during light exposure. Through this example we show that FSP is a versatile technique for efficiently designing a homologous library, meaning a library based on a parent oxide doped with different amounts of dopant, and investigating the properties of the resulting compounds. Finally, we describe the future outlook and state-of-the-art of an innovative two-flame system. A double-flame reactor enables independent control over each flame, the nozzle distances and the flame angles for efficient mixing of the particle streams. In addition, it allows for different flame compositions, flame sizes, and multicomponent mixing (a grain-grain heterojunction) during the reaction process.

Project description:There is increasing concern that particulate contaminants including manufactured nanomaterials and nano- and microplastics taken up and or accumulating in lower-trophic level aquatic organisms results in dietary exposure of fish feeding on these organisms. Controlled feeding studies can help advance our understanding of dietary uptake, bioaccumulation, and associated effects of (nano)particulate contaminants in fish, and also provide information about their likelihood to be transferred along the trophic chain and or to act as vector for other, surface-adsorbed pollutants. However, traditional approaches to prepare test feed for dietary exposure studies where commercial fish feed such as flakes, granules or pellets are soaked or spray-spiked with dissolved chemicals are not well suitable for (nano-)particulate contaminants. Microplastics, which often have sizes in the µm to mm range, and manufactured nanomaterials, in particular those which are soluble, such as metal/metal oxide nanoparticles, have to be incorporated into the feed to avoid their dissociation and or dissolution before the feed is ingested by the animal to avoid undesired waterborne exposure, which may confound results.•Here we describe a methodological approach to produce worm-shaped food packages, that is a practical diet, of controlled diameter and length (in the millimeter range), which allows to prepare food rations with a weight in the order of a few milligrams and to adjust the food rations to the individual body wet weight of small experimental fish with high accuracy (±0.5 mg) without the need for weighing/proportioning the feed using a scale.•The method can be used to prepare test feed with internally incorporated particulate contaminants, such as manufactured nanomaterials and nano- and microplastics, to assess the latter's dietary uptake, bioaccumulation and associated toxicity in fish. We described two protocol variations: One using dry starting material, such as feed flakes, and one using liquid starting material, such as worm homogenate.•The method has been developed for academic research environments with no access to specialized equipment for test feed preparation, and uses utensils and inexpensive plastic ware belonging to the standard inventory of ecotoxicological research laboratories.

Dataset Information

Preparation of feed with metal oxide nanoparticles for nanomaterial dietary exposure to fish and use in OECD TG 305.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets