Browse
Submit Data
Databases
API
Help

Dataset Information

18 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Anion-Ordering Phase Transitions in Biferrocenium and Ferrocenium Salts with the Bis(trifluoromethanesulfonyl)amide Anion.

ABSTRACT: The bis(trifluoromethanesulfonyl)amide anion (Tf₂N), which is a common component of ionic liquids, often exhibits disorder in the solid state. In this study, the phase transitions and crystal structures of the Tf₂N salts of 1,1‴-dineopentyl-1',1″-biferrocene (=npBifc), 1',1″-biferrocene (=Bifc), ferrocene, and cobaltocene (1-4, respectively) were compared. All the salts exhibited phase transitions at low temperatures, which are accompanied by anion ordering, though the ordering was not complete in 2 and 3. X-ray crystallographic investigation revealed that the cations and anions in 1 and 2 adopted alternating arrangements and segregated columnar arrangements, respectively. The cation in 1 exhibited a symmetrical, average-valence structure in the room-temperature phase owing to rapid valence tautomerization, whereas the cation exhibited an unsymmetrical structure in the low-temperature phase. The cation in 2 exhibited an unsymmetrical, trapped-valence structure in both phases. The cation valence states in these salts were accounted for by the electrostatic interactions between the cations and anions. The crystal structures and phase behavior of the ferrocenium salt 3 were very different from those of 4.

SUBMITTER: Kimata H

PROVIDER: S-EPMC8375087 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Temperature-Dependent Electrochemical Stability Window of Bis(trifluoromethanesulfonyl)imide and Bis(fluorosulfonyl)imide Anion Based Ionic Liquids.

Project description:The electrochemical stability of 22 commercially available hydrophobic ionic liquids was measured at different temperatures (288.15, 298.15, 313.15, 333.15 and 358.15 K), to systematically investigate ionic liquids towards electrolytes for supercapacitors in harsh weather conditions. Bis(trifluoromethanesulfonyl)imide and bis(fluorosulfonyl)imide anions in combination with 1-Butyl-1-methylpyrrolidinium, 1-Ethyl-3-methylimidazolium, N-Ethyl-N, N-dimethyl-N(2methoxyethyl)ammonium, 1-Methyl-1-(2-methoxyethyl)pyrrolidinium, N-Pentyl-N-methylpyrrolidinium, N, N-Diethyl-N-methyl-N-propylammonium, N, N-Dimethyl-N-ethyl-N-benzyl ammonium, N, N-Dimethyl-N-Ethyl-N-phenylethylammonium, N-Butyl-N-methylpiperidinium, 1-Methyl-1-propylpiperidinium, N-Tributyl-N-methylammonium, N-Trimethyl-N-butylammonium, N-Trimethyl-N-butylammonium, N-Trimethyl-N-propylammonium, N-Propyl-N-methylpyrrolidinium cations were selected for the study. Linear regression with a numerical model was used in combination with voltammetry experiments to deduce the temperature sensitivity of both anodic and cathodic potential limits (defining the electrochemical stability window), in addition to extrapolating results to 283.15 and 363.15 K. We evaluated the influence of the cations, anions, and the presence of functional groups on the observed electrochemical stability window which ranged from 4.1 to 6.1 V.

| S-EPMC9247390 | biostudies-literature

Anion-directed self-assembly of a 2,6-bis(2-anilinoethynyl)pyridine bis(amide) scaffold.

Project description:Bis(sulfonamide) receptors based on the 2,6-bis(2-anilinoethynyl)pyridine scaffold form persistent dimers with water and halides in solution and in the solid-state. The structurally related bis(amide) receptor derived from 3,5-dinitrobenzoyl chloride is a dimer in the solid-state with two HCl molecules directing the self-assembly. The 2+2 dimer, with a twisted "S"-shaped backbone, is held together by six hydrogen bonds. Dissolution of the (H2+·Cl- )2 adduct in CHCl3 results, however, in a monomeric structure. DOSY and 1H NMR experiments were used to identify the dominance of monomer in solution for both 2 and H2+·Cl- . The 'OFF-ON' fluorescence response of 2, 6-bis(2-anilinoethynyl)pyridine is retained with amide arms.

| S-EPMC4838391 | biostudies-literature

Investigation of Ternary Mixtures Containing 1-Ethyl-3-methylimidazolium Bis(trifluoromethanesulfonyl)azanide, Ethylene Carbonate and Lithium Bis(trifluoromethanesulfonyl)azanide.

Project description:Temperature-dependent viscosity, conductivity and density data of ternary mixtures containing 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)azanide (EMIM-TFSA), ethylene carbonate (EC), and lithium bis(trifluoromethanesulfonyl)azanide (Li-TFSA) were determined at atmospheric pressure in the temperature range of 20 to 80 °C. Differential scanning calorimetry (DSC) measurements were performed to characterize phase conditions of the mixtures in a temperature range of -120 to +100 °C. The viscosity data were fitted according to the Vogel-Fulcher-Tammann-Hesse (VFTH) equation and analyzed with the help of the fractional Walden rule. In this study, fundamental physicochemical data about the mixtures are provided and discussed as a basis for structure-property relationship calculations and for potential use of those mixtures as electrolytes for various applications.

| S-EPMC4881496 | biostudies-literature

Magnetic-charge ordering and phase transitions in monopole-conserved square spin ice.

Project description:Magnetic-charge ordering and corresponding magnetic/monopole phase transitions in spin ices are the emergent topics of condensed matter physics. In this work, we investigate a series of magnetic-charge (monopole) phase transitions in artificial square spin ice model using the conserved monopole density algorithm. It is revealed that the dynamics of low monopole density lattices is controlled by the effective Coulomb interaction and the Dirac string tension, leading to the monopole dimerization which is quite different from the dynamics of three-dimensional pyrochlore spin ice. The condensation of the monopole dimers into monopole crystals with staggered magnetic-charge order can be predicted clearly. For the high monopole density cases, the lattice undergoes two consecutive phase transitions from high-temperature paramagnetic/charge-disordered phase into staggered charge-ordered phase before eventually toward the long-range magnetically-ordered phase as the ground state which is of staggered charge order too. A phase diagram over the whole temperature-monopole density space, which exhibits a series of emergent spin and monopole ordered states, is presented.

| S-EPMC4625371 | biostudies-literature

Effect of Bulky Anion around the Dication on the Electronic Structure and Normal Frequencies in 1,3-Bis(3-methylimidazolium-1-yl)propane Bis(trifluoromethanesulfonyl)imide Ionic Liquid.

Project description:A manifestation of hydrogen bonding between the dication and anions attributed to their relative position of the anions around the cation can influence both the conformational equilibrium and the physical properties of ionic liquids. With this view, we studied the electronic structure and normal frequencies using density functional theory calculations to analyze the hydrogen-bonding interactions in dicationic ionic liquids. The conformers are distinguished based on the hydrogen-bonding sites of the cation and anion. The weak hydrogen bonding between the dication and anions in dication ionic liquids can lead to greater conformational equilibrium compared to the monocation system. Consequences of these interactions for the vibrational spectrum are analyzed to provide an insight into the conformational equilibrium in dicationic ionic liquids at the molecular level.

| S-EPMC8444328 | biostudies-literature

Enantioselective Heck-Matsuda Arylations through Chiral Anion Phase-Transfer of Aryl Diazonium Salts.

Project description:A mild, asymmetric Heck-Matsuda reaction of five-, six- and seven-membered ring alkenes and aryl diazonium salts is presented. High yields and enantioselectivities were achieved using Pd0 and chiral anion co-catalysts, the latter functioning as a chiral anion phase-transfer (CAPT) reagent. For certain substrate classes, the chiral anion catalysts were modulated to minimize the formation of undesired by-products. More specifically, BINAM-derived phosphoric acid catalysts were shown to prevent alkene isomerization in cyclopentene and cycloheptene starting materials. DFT(B3LYP-D3) computations revealed that increased product selectivity resulted from a chiral anion dependent lowering of the activation barrier for the desired pathway.

| S-EPMC5528849 | biostudies-literature

Melting Temperature Depression and Phase Transitions of Nitrate-Based Molten Salts in Nanoconfinement.

Project description:Hybrids of nitrate-based molten salts (KNO3, NaNO3, and Solar Salt) and anodic aluminum oxide (AAO) with various pore sizes (between 25 and 380 nm) were designed for concentrated solar power (CSP) plants to achieve low melting point (<200 °C) and high thermal conductivity (>1 W m-1 K-1). AAO pore surfaces were passivated with octadecyl phosphonic acid (ODPA), and the results were compared with as-anodized AAO. The change in phase transition temperatures and melting temperatures of salts was investigated as a function of pore diameter. Melting temperatures decreased for all salts inside AAO with different pore sizes while the highest melting temperature decrease (ΔT = 173 ± 2 °C) was observed for KNO3 filled in AAO with a pore diameter of 380 nm. Another nanoconfinement effect was observed in the crystal phases of the salts. The ferroelectric phase of KNO3 (γ-phase) formed at room temperature for KNO3/AAO hybrids with pore size larger than 35 nm. Thermal conductivity values of molten salt (MS)/AAO hybrids were obtained by thermal property analysis (TPS) at room temperature and above melting temperatures of the salts. The highest increase in thermal conductivity was observed as 73% for KNO3/AAO-35 nm. For NaNO3/AAO-380 nm hybrids, the thermal conductivity coefficient was 1.224 ± 0.019 at room temperature. To determine the capacity and efficiency of MS/AAO hybrids during the heat transfer process, the energy storage density per unit volume (J m-3) was calculated. The highest energy storage capacity was calculated as 2390 MJ m-3 for KNO3/AAO with a pore diameter of 400 nm. This value is approximately five times higher than that of bulk salt.

| S-EPMC9301948 | biostudies-literature

Experimental dataset on electrolyte mixtures containing fluoroethylene carbonate and lithium bis(trifluoromethanesulfonyl)imide.

Project description:These data and analyses support the research article "Low-flammable electrolytes with fluoroethylene carbonate based solvent mixtures and lithium bis(trifluoromethanesulfonyl)-imide (LiTFSI) for lithium-ion batteries" [1]. The data and analyses presented here include fitted data for density measurements, temperature dependence of density and specific volume of the mixtures, detailed viscosity measurements and conductivity data, current density plots with respect to anodic aluminum dissolution, half-cell C-rate capability of mixtures with the additives used in research article as well as the SEM images and EDX data of the full-cell with the electrolyte selected and controlled.

| S-EPMC6373205 | biostudies-literature

Theoretical Investigation of Energetic Salts with Pentazolate Anion.

Project description:Energetic salts based on pentazolate anion (cyclo-N5-) have attracted much attention due to their high nitrogen contents. However, it is an enormous challenge to efficiently screen out an appropriate cation that can match well with cyclo-N5-. The vertical electron affinity (VEA) of the cations and vertical ionization potential (VIP) of the anions for 135 energetic salts and some cyclo-N5- salts were calculated by the density functional theory (DFT). The magnitudes of VEA and VIP, and their matchability were analyzed. The results based on the calculations at the B3LYP/6-311++G(d,p) and B3LYP/aug-cc-pVTZ levels indicate that there is an excellent compatibility between cyclo-N5- and cation when the difference between the VEA of cation and the VIP of cyclo-N5- anion is -2.8 to -1.0 eV. The densities of the salts were predicted by the DFT method. Relationship between the calculated density and the experimental density was established as ?Expt = 1.111?cal - 0.06067 with a correlation coefficient of 0.905. This regression equation could be in turn used to calibrate the calculated density of the cyclo-N5- energetic salts accurately. This work provides a favorable way to explore the energetic salts with excellent performance based on cyclo-N5-.

| S-EPMC7221799 | biostudies-literature

Photochemical reaction cycle transitions during anion channelrhodopsin gating.

Project description:A recently discovered family of natural anion channelrhodopsins (ACRs) have the highest conductance among channelrhodopsins and exhibit exclusive anion selectivity, which make them efficient inhibitory tools for optogenetics. We report analysis of flash-induced absorption changes in purified wild-type and mutant ACRs, and of photocurrents they generate in HEK293 cells. Contrary to cation channelrhodopsins (CCRs), the ion conducting state of ACRs develops in an L-like intermediate that precedes the deprotonation of the retinylidene Schiff base (i.e., formation of an M intermediate). Channel closing involves two mechanisms leading to depletion of the conducting L-like state: (i) Fast closing is caused by a reversible L?M conversion. Glu-68 in Guillardia theta ACR1 plays an important role in this transition, likely serving as a counterion and proton acceptor at least at high and neutral pH. Incomplete suppression of M formation in the GtACR1_E68Q mutant indicates the existence of an alternative proton acceptor. (ii) Slow closing of the channel parallels irreversible depletion of the M-like and, hence, L-like state. Mutation of Cys-102 that strongly affected slow channel closing slowed the photocycle to the same extent. The L and M intermediates were in equilibrium in C102A as in the WT. In the position of Glu-123 in channelrhodopsin-2, ACRs contain a noncarboxylate residue, the mutation of which to Glu produced early Schiff base proton transfer and strongly inhibited channel activity. The data reveal fundamental differences between natural ACR and CCR conductance mechanisms and their underlying photochemistry, further confirming that these proteins form distinct families of rhodopsin channels.

| S-EPMC4833267 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data