Browse
Submit Data
Databases
API
Help

Dataset Information

26 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Ultrahigh-speed graphene-based optical coherent receiver.

ABSTRACT: Graphene-based photodetectors have attracted significant attention for high-speed optical communication due to their large bandwidth, compact footprint, and compatibility with silicon-based photonics platform. Large-bandwidth silicon-based optical coherent receivers are crucial elements for large-capacity optical communication networks with advanced modulation formats. Here, we propose and experimentally demonstrate an integrated optical coherent receiver based on a 90-degree optical hybrid and graphene-on-plasmonic slot waveguide photodetectors, featuring a compact footprint and a large bandwidth far exceeding 67 GHz. Combined with the balanced detection, 90 Gbit/s binary phase-shift keying signal is received with a promoted signal-to-noise ratio. Moreover, receptions of 200 Gbit/s quadrature phase-shift keying and 240 Gbit/s 16 quadrature amplitude modulation signals on a single-polarization carrier are realized with a low additional power consumption below 14 fJ/bit. This graphene-based optical coherent receiver will promise potential applications in 400-Gigabit Ethernet and 800-Gigabit Ethernet technology, paving another route for future high-speed coherent optical communication networks.

SUBMITTER: Wang Y

PROVIDER: S-EPMC8379243 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Small Molecule Based Organic Photo Signal Receiver for High-Speed Optical Wireless Communications.

Project description:The present work describes the development of an organic photodiode (OPD) receiver for high-speed optical wireless communication. To determine the optimal communication design, two different types of photoelectric conversion layers, bulk heterojunction (BHJ) and planar heterojunction (PHJ), are compared. The BHJ-OPD device has a -3 dB bandwidth of 0.65 MHz (at zero bias) and a maximum of 1.4 MHz (at -4 V bias). A 150 Mbps single-channel visible light communication (VLC) data rate using this device by combining preequalization and machine learning (ML)-based digital signal processing (DSP) is demonstrated. To the best of the authors' knowledge, this is the highest data rate ever achieved on an OPD-based VLC system by a factor of 40 over the previous fastest reported. Additionally, the proposed OPD receiver achieves orders of magnitude higher spectral efficiency than the previously reported organic photovoltaic (OPV)-based receivers.

| S-EPMC9661864 | biostudies-literature

High speed all optical Nyquist signal generation and full-band coherent detection.

Project description:Spectrum efficient data transmission is of key interest for high capacity optical communication systems considering the limited available bandwidth. Transmission of the high speed signal with higher-order modulation formats within the Nyquist bandwidth using coherent detection brings attractive performance advantages. However, high speed Nyquist signal generation with high order modulation formats is challenging. Electrical Nyquist pulse generation is restricted by the limited sampling rate and processor capacities of digital-to-analog convertor devices, while the optical Nyquist signals can provide a much higher symbol rate using time domain multiplexing method. However, most optical Nyquist signals are based on direct detection with simple modulation formats. Here we report the first experimental demonstration of high speed all optical Nyquist signal generation based on Sinc-shaped pulse generation and time-division multiplexing with high level modulation format and full-band coherent detection. Our experiments demonstrate a highly flexible and compatible all optical high speed Nyquist signal generation and detection scheme for future fiber communication systems.

| S-EPMC4139967 | biostudies-literature

Automated quantification of choriocapillaris anatomical features in ultrahigh-speed optical coherence tomography angiograms.

Project description:In vivo visualization and quantification of choriocapillaris vascular anatomy is a fundamental step in understanding the relation between choriocapillaris degradation and atrophic retinopathies, including geographic atrophy. We describe a process utilizing ultrahigh-speed swept-source optical coherence tomography and a custom-designed "local min-max normalized masking" algorithm to extract in vivo anatomical metrics of the choriocapillaris. We used a swept-source optical coherence tomography system with a 1.6 MHz A-scan rate to image healthy retinas. With the postprocessing algorithm, we reduced noise, optimized visibility of vasculature, and skeletonized the vasculature within the images. These skeletonizations were in 89% agreement with those made by skilled technicians and were, on average, completed in 18.6 s as compared to the 5.6 h technicians required. Anatomy within the processed images and skeletonizations was analyzed to identify average values ( mean±SD ) of flow void radius ( 9.8±0.7µm ), flow void area (749±110µm2 ), vessel radius (5.0±0.3µm ), branch-point to branch-point vessel length (26.8±1.1µm ), and branches per branch-point (3.1±0.1) . To exemplify the uses of this tool a retina with geographic atrophy was imaged and processed to reveal statistically significant (p<0.05) increases in flow void radii and decreases in vessel radii under atrophic lesions as compared to atrophy-free regions on the same retina. Our results demonstrate a new avenue for quantifying choriocapillaris anatomy and studying vasculature changes in atrophic retinopathies.

| S-EPMC6788607 | biostudies-literature

Terahertz coherent receiver using a single resonant tunnelling diode.

Project description:Towards exploring advanced applications of terahertz (THz) electromagnetic waves, great efforts are being applied to develop a compact and sensitive THz receiver. Here, we propose a simple coherent detection system using a single resonant tunnelling diode (RTD) oscillator through self-oscillating mixing with an RTD oscillator injection-locked by a carrier wave. Coherent detection is successfully demonstrated with an enhancement in the sensitivity of >20?dB compared to that of direct detection. As a proof of concept, we performed THz wireless communications using an RTD coherent receiver and transmitter. We achieved 30-Gbit/s real-time error-free transmission, which is the highest among all electronic systems without error correction to date. Our results show that the proposed system can reduce the size and power consumption of various THz systems including sensing, imaging and ranging, which would enable progress to be made in a wide range of fields in such as material science, medicine, chemistry, biology, physics, astronomy, security, robotics and motor vehicle.

| S-EPMC6889129 | biostudies-literature

Modular coherent photonic-aided payload receiver for communications satellites.

Project description:Ubiquitous satellite communications are in a leading position for bridging the digital divide. Fulfilling such a mission will require satellite services on par with fibre services, both in bandwidth and cost. Achieving such a performance requires a new generation of communications payloads powered by large-scale processors, enabling a dynamic allocation of hundreds of beams with a total capacity beyond 1 Tbit s-1. The fact that the scale of the processor is proportional to the wavelength of its signals has made photonics a key technology for its implementation. However, one last challenge hinders the introduction of photonics: while large-scale processors demand a modular implementation, coherency among signals must be preserved using simple methods. Here, we demonstrate a coherent photonic-aided receiver meeting such demands. This work shows that a modular and coherent photonic-aided payload is feasible, making way to an extensive introduction of photonics in next generation communications satellites.

| S-EPMC6491822 | biostudies-literature

Ultrahigh speed endoscopic optical coherence tomography using micromotor imaging catheter and VCSEL technology.

Project description:We developed a micromotor based miniature catheter with an outer diameter of 3.2 mm for ultrahigh speed endoscopic swept source optical coherence tomography (OCT) using a vertical cavity surface-emitting laser (VCSEL) at a 1 MHz axial scan rate. The micromotor can rotate a micro-prism at several hundred frames per second with less than 5 V drive voltage to provide fast and stable scanning, which is not sensitive to the bending of the catheter. The side-viewing probe can be pulled back to acquire a three-dimensional (3D) data set covering a large area on the specimen. The VCSEL provides a high axial scan rate to support dense sampling under high frame rate operation. Using a high speed data acquisition system, in vivo 3D-OCT imaging in the rabbit GI tract and ex vivo imaging of a human colon specimen with 8 μm axial resolution, 8 μm lateral resolution and 1.2 mm depth range in tissue at a frame rate of 400 fps was demonstrated.

| S-EPMC3704093 | biostudies-other

Choroidal Neovascularization Analyzed on Ultrahigh-Speed Swept-Source Optical Coherence Tomography Angiography Compared to Spectral-Domain Optical Coherence Tomography Angiography.

Project description:PurposeTo compare visualization of choroidal neovascularization (CNV) secondary to age-related macular degeneration (AMD) using an ultrahigh-speed swept-source (SS) optical coherence tomography angiography (OCTA) prototype vs a spectral-domain (SD) OCTA device.DesignComparative analysis of diagnostic instruments.MethodsPatients were prospectively recruited to be imaged on SD OCT and SS OCT devices on the same day. The SD OCT device employed is the RTVue Avanti (Optovue, Inc, Fremont, California, USA), which operates at ∼840 nm wavelength and 70 000 A-scans/second. The SS OCT device used is an ultrahigh-speed long-wavelength prototype that operates at ∼1050 nm wavelength and 400 000 A-scans/second. Two observers independently measured the CNV area on OCTA en face images from the 2 devices. The nonparametric Wilcoxon signed rank test was used to compare area measurements and P values of <.05 were considered statistically significant.ResultsFourteen eyes from 13 patients were enrolled. The CNV in 11 eyes (78.6%) were classified as type 1, 2 eyes (14.3%) as type 2, and 1 eye (7.1%) as mixed type. Total CNV area measured using SS OCT and SD OCT 3 mm × 3 mm OCTA were 0.949 ± 1.168 mm(2) and 0.340 ± 0.301 mm(2), respectively (P = .001). For the 6 mm × 6 mm OCTA the total CNV area using SS OCT and SD OCT were 1.218 ± 1.284 mm(2) and 0.604 ± 0.597 mm(2), respectively (P = .0019). The field of view did not significantly affect the measured CNV area (P = .19 and P = .18 for SS OCT and SD OCT, respectively).ConclusionSS OCTA yielded significantly larger CNV areas than SD OCTA. It is possible that SS OCTA is better able to demarcate the full extent of CNV vasculature.

| S-EPMC4811690 | biostudies-literature

Ultrahigh-speed distributed Brillouin reflectometry.

Project description:Optical fibre sensors based on Brillouin scattering have been vigorously studied in the context of structural health monitoring on account of their capacity for distributed strain and temperature measurements. However, real-time distributed strain measurement has been achieved only for two-end-access systems; such systems reduce the degree of freedom in embedding the sensors into structures, and furthermore render the measurement no longer feasible when extremely high loss or breakage occurs at a point along the sensing fibre. Here, we demonstrate real-time distributed measurement with an intrinsically one-end-access reflectometry configuration by using a correlation-domain technique. In this method, the Brillouin gain spectrum is obtained at high speed using a voltage-controlled oscillator, and the Brillouin frequency shift is converted into a phase delay of a synchronous sinusoidal waveform; the phase delay is subsequently converted into a voltage, which can be directly measured. When a single-point measurement is performed at an arbitrary position, a strain sampling rate of up to 100?kHz is experimentally verified by detecting locally applied dynamic strain at 1?kHz. When distributed measurements are performed at 100 points with 10 times averaging, a repetition rate of 100?Hz is verified by tracking a mechanical wave propagating along the fibre. Some drawbacks of this ultrahigh-speed configuration, including the reduced measurement accuracy, lowered spatial resolution and limited strain dynamic range, are also discussed.

| S-EPMC6059889 | biostudies-other

Ultrahigh Performance of Nanoengineered Graphene-Based Natural Jute Fiber Composites.

Project description:Natural fibers composites are considered as a sustainable alternative to synthetic composites due to their environmental and economic benefits. However, they suffer from poor mechanical and interfacial properties due to a random fiber orientation and weak fiber-matrix interface. Here we report nanoengineered graphene-based natural jute fiber preforms with a new fiber architecture (NFA) which significantly improves their mechanical properties and performances. Our graphene-based NFA of jute fiber preform enhances the Young modulus of jute-epoxy composites by ?324% and tensile strength by ?110% more than untreated jute fiber composites, by arranging fibers in a parallel direction through individualization and nanosurface engineering with graphene derivatives. This could potentially lead to manufacturing of high-performance natural alternatives to synthetic composites in various stiffness-driven applications.

| S-EPMC6566500 | biostudies-literature

Ultrahigh-gain photodetectors based on atomically thin graphene-MoS2 heterostructures.

Project description:Due to its high carrier mobility, broadband absorption, and fast response time, the semi-metallic graphene is attractive for optoelectronics. Another two-dimensional semiconducting material molybdenum disulfide (MoS2) is also known as light- sensitive. Here we show that a large-area and continuous MoS2 monolayer is achievable using a CVD method and graphene is transferable onto MoS2. We demonstrate that a photodetector based on the graphene/MoS2 heterostructure is able to provide a high photogain greater than 10(8). Our experiments show that the electron-hole pairs are produced in the MoS2 layer after light absorption and subsequently separated across the layers. Contradictory to the expectation based on the conventional built-in electric field model for metal-semiconductor contacts, photoelectrons are injected into the graphene layer rather than trapped in MoS2 due to the presence of a perpendicular effective electric field caused by the combination of the built-in electric field, the applied electrostatic field, and charged impurities or adsorbates, resulting in a tuneable photoresponsivity.

| S-EPMC3899643 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data