Dataset Information

Biofilm producing indigenous bacteria isolated from municipal sludge and their nutrient removal ability in moving bed biofilm reactor from the wastewater.

ABSTRACT: In the present study, improved moving bed biofilm reactor (MBBR) was applied to enhance the nutrient removal ability of the municipal wastewater. A total of 18 indigenous bacterial isolates were screened from the sewage sludge sample and nitrate reductase, nitrite reductase and hydroxylamine oxidase was analyzed. The strains Pseudomonas aeruginosa NU1 and Acinetobacter calcoaceticus K12 produced 0.87 ± 0.05 U/mg and 0.52 ± 0.12 U/mg hydroxylamine oxidase, 1.023 ± 0.062 U/mg and 1.29 ± 0.07 U/mg nitrite reductase, and 0.789 ± 0.031 U/mg and 1.07 ± 0.13 U/mg nitrate reductase. Nitrogen and phosphate removal improved by the addition of nutrient sources and achieved > 80% removal rate. pH and temperature of the medium also affected nutrient removal and improved removal was achieved at optimum level (p < 0.05). MBBR was designed with R1 (aerobic), R2 and R3 (anoxic) reactors. MBBR reactors removed acceptable level phosphorus removal properties up to 7.2 ± 3.8%, 42.4 ± 4.6%, and 84.2 ± 13.1% in the R1, R2, R3 and R4 reactors, respectively. Denitrification rate showed linear relationship at increasing concentrations nitrogen content in the reactor and denitrification rate was 1.43 g NO₂-N /m²/day at 1.5 g NO₂-N /m²/day. Dehydrogenase activity was assayed in all reactors and maximum amount was detected in the aerobic biofilm reactor. Based on the present findings, MBBRs and the selected bacterial strains are useful for the degradation domestic wastewater with minimum working area.

SUBMITTER: Alarjani KM

PROVIDER: S-EPMC8381082 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Similar Datasets

Project description:Moving Bed Biofilm Reactors (MBBRs) can efficiently treat wastewater by incorporating suspended biocarriers that provide attachment surfaces for active microorganisms. The performance of MBBRs for wastewater treatment is, among other factors, contingent upon the characteristics of the surface area of the biocarriers. Thus, novel biocarrier topology designs can potentially increase MBBR performance in a significant manner. The goal of this work is to assess the performance of 3-D-printed biofilter media biocarriers with varying surface area designs for use in nitrifying MBBRs for wastewater treatment. Mathematical models, rendering, and 3D printing were used to design and fabricate gyroid-shaped biocarriers with a high degree of complexity at three different levels of specific surface area (SSA), generally providing greater specific surface areas than currently available commercial designs. The biocarriers were inoculated with a nitrifying bacteria community, and tested in a series of batch reactors for ammonia conversion to nitrate, in three different experimental configurations: constant fill ratio, constant total surface area, and constant biocarrier media count. Results showed that large and medium SSA gyroid biocarriers delivered the best ammonia conversion performance of all designs, and significantly better than that of a standard commercial design. The percentage of ammonia nitrogen conversion at 8 hours for the best performing biocarrier design was: 99.33% (large SSA gyroid, constant fill ratio), 94.74% (medium SSA gyroid, constant total surface area), and 92.73% (large SSA gyroid, constant biocarrier media count). Additionally, it is shown that the ammonia conversion performance was correlated to the specific surface area of the biocarrier, with the greatest rates of ammonia conversion (99.33%) and nitrate production (2.7 mg/L) for manufactured gyroid biocarriers with a specific surface area greater than 1980.5 m2/m3. The results suggest that the performance of commercial MBBRs for wastewater treatment can be greatly improved by manipulation of media design through topology optimization.

Project description:2,4-Dichlorophenoxyacetic acid (2,4-D) is a herbicide that is considered as a carcinogenic and highly toxic contaminant, and due to its biological and chemical stability, its degradation is very difficult. Therefore, this study aimed to investigate a hybrid system's efficiency of three-dimensional electrochemical (3DE) process and a moving bed biofilm reactor (MBBR) in removing 2,4-D herbicides from aqueous solutions. In this experimental study, the electrochemical degradation of 2,4-D herbicide in a 3DE process with a G/β-PbO2 anode was first investigated as a pretreatment process. Then, in the post-treatment stage, MBBR with continuous flow was used. The amount of aeration in the MBBR reactor was 4 L min-1, and the amount of dissolved oxygen (DO) was in the range of 3-5 mg L-1. The effect of various parameters such as hydraulic retention time (HRT) and filling ratio were investigated. The amount of sewage injection was set between 0.001-0.004 L min-1. Routine microbiological biochemical tests were used to detect bacteria. BOD5/COD, COD/TOC, AOS, and COS ratio parameters were used to determine the biodegradability of 2.4-D due to the effluent of the 3DE process. The results showed that with increasing current density, decreasing pH, decreasing herbicide concentration and increasing electrolysis time, the herbicide degradation efficiency increased by 3DE pretreatment process. Based on the results of MBBR post-treatment process efficiency, with increasing HRT and filling ratio, the herbicide removal efficiency increased. According to the results, the highest removal efficiencies of 2,4-D and COD herbicides were obtained during HRT of 24 h, and the filling ratio of 70% were 97.33% and 88.95%, respectively. The consortium of 2,4-D degrading bacteria identified in this study included E. coli, Enterobacter spp., Bacillus spp., Alcaligenes spp., Proteus spp., Acinetobacter spp., Pseudomonas spp., Arthrobacter, and Brevundimonas vesicularis. In the MBBR biological process, the reaction kinetics followed the Grau second-order model (R 2 = 0.98). In general, the results showed that the combined process of 3DE with G/β-PbO2 anode and MBBR biological process has relatively high efficiency in 2,4-D herbicide degradation and can be used as a suitable complementary treatment method in wastewater containing non-degradable compounds such as phenoxy herbicides, e.g., 2,4-D should be used.

Dataset Information

Biofilm producing indigenous bacteria isolated from municipal sludge and their nutrient removal ability in moving bed biofilm reactor from the wastewater.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets