Browse
Submit Data
Databases
API
Help

Dataset Information

18 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Preparation and growth mechanism of micro spherical ammonium dinitramide crystal based on ultrasound-assisted solvent-antisolvent method.

ABSTRACT: Micro-sized spherical ammonium dinitramide (ADN) crystals are successfully prepared by a facile ultrasound-assisted solvent-antisolvent recrystallization method without introducing any additives. The influences of the volume ratio of solvent to antisolvent, the antisolvent temperature and the ultrasound power on the micro-morphologies and properties of ADN crystals are studied systematically. The changes of morphology, particle size, crystal structure and melting point of the ADN crystals are characterized through scanning electron microscopy (SEM), laser particle size analyzer (LPSA), X-ray diffraction (XRD) and differential scanning calorimetry (DSC), respectively. The results show that the optimal experimental parameters for the ADN crystal of spherical morphology are as follows: the volume ratio of solvent to antisolvent is 1:50, the antisolvent temperature is 20 ℃, and the ultrasound power is 70 W. The predicted hexagonal-flake and spherical morphologies for the ADN are close to the experimental morphologies. The growth mechanism of the spherical ADN crystal changes with supersaturation of the ADN solution. As the degree of supersaturation increases, the growth models of the spherical ADN change from the spiral growth to the rough growth, and the morphologies of ADN change from the large-sized ADN ball to the small-sized ADN ball.

SUBMITTER: Li J

PROVIDER: S-EPMC8384905 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Ultrasound-assisted preparation of calcium malate and its absorption.

Project description:In this experiment, response surface methodology was used to study the preparation of malic acid calcium salt from bovine bones assisted by ultrasonication. The results showed that the optimum conditions for ultrasound-assisted preparation of calcium malate from bovine bone were as follows: solid-liquid ratio 1:15, solid-acid ratio 1:1.5, ultrasonic power 200 W, ultrasonic temperature 35°C, and ultrasonication time 17 min. The efficiency of calcium recovery was 66.16%, and the purity was 92.54%. After three ultrasonic treatments of 17 min each, the calcium malate conversion rate of bovine bone reached 95.73%. Animal experiments showed that feeding bovine bone-derived calcium malate significantly increased alkaline phosphatase (ALP) activity and bone calcium content, reduced tartrate-resistant acid phosphatase (TRAP) activity, and maintained the balance of serum calcium and phosphorus. These results indicated that the ultrasonic method effectively ionized calcium in bovine bone, which provides a reference point for the industrial production of calcium products with bovine bone as the raw material.

| S-EPMC8282047 | biostudies-literature

Deep Eutectic Solvent Micro-Functionalized Graphene Assisted Dispersive Micro Solid-Phase Extraction of Pyrethroid Insecticides in Natural Products.

Project description:Deep eutectic solvent micro-functionalized graphene (DES-G) was synthesized and first applied as the adsorbent of dispersive micro solid-phase extraction (DMSPE) to extract five pyrethroid insecticides. In DMSPE, the target analytes were absorbed by DES-G and then desorbed by trace eluent, next, the treated samples were quantified via ultra-high performance liquid chromatography equipped with diode-array detection. A scanning electron microscope, transmission electron microscopy and Fourier transform infrared spectrometer were used to characterize the prepared DES-G. Furthermore, this method was verified under the selected conditions with the precision for retention times ranging from 0.43 to 0.57%, and repeatability ranged from 0.04 to 2.41% for peak areas. The developed method was successfully applied to determine pyrethroid insecticides residues in beebread, Curcuma wenyujin and Dendrobium officinale with the recoveries in the range of 80.9-114.1%.

| S-EPMC6716533 | biostudies-literature

Ultrasound-assisted enzymatic synthesis of xylitol fatty acid esters in solvent-free conditions.

Project description:A commercial immobilized lipase was successfully used for the synthesis of five xylityl acyl esters by means of the esterification of free fatty acids (caprylic, capric, lauric and myristic, respectively) with xylitol under solvent-free conditions. Ultrasound-assistance was shown to be a key tool to overcome the handicap imposed by both the mutual immiscibility of fatty acids and xylitol substrates, and the semisolid character of the initial reaction mixtures. In such semisolid systems, ultrasonic irradiation may enable the transport of substrate molecules to the enzyme catalytic-site, leading to the efficient synthesis of xylityl fatty ester (e.g. up to 95% yield after 90 min at 40 °C), with xylityl monoacyl ester and xylitol diacyl ester appearing as the main products (greater than 96%), assessed by HPLC and NMR analyses. The separation of products was carried out by heating and simple centrifugation of the reaction medium, which was possible due to different densities of the resulting fractions.

| S-EPMC8170488 | biostudies-literature

Preparation of low molecular weight heparin using an ultrasound-assisted Fenton-system.

Project description:Heparin, a high-molecular weight acidic polysaccharide, has raised much interest in the field of biomedical research due to its multiple bio-functions. The anticoagulant application of heparin in routine clinical practice, however, has been limited as the large molecular size of heparin can reduce its subcutaneous bioavailability and lead to severe adverse consequences such as thrombocytopenia. Here, we report a highly efficient and convenient method to depolymerize high-molecular weight, unfractionated heparin (UFH), into low molecular weight heparin (LMWH) by combining physical ultrasonic treatment with the chemical Fenton reaction, referred to as sono-Fenton. We found that this combination treatment synergistically degraded UFH into a LMWH of 4.87 kDa within 20 min. We characterized the mechanism of sono-Fenton heparin degradation through multiple approaches, including HPLC-SAX, disaccharide composition, FT-IR, NMR and top-down analysis, and found that the uronic acid residue in heparin was the most susceptible site attacked by OH radicals produced in the sono-Fenton process. Importantly, the LMWH prepared by this method had significantly higher anticoagulant activity than UFH and other LMWHs. This approach represents an effective method to produce heparin with improved activity and should be potentially useful for heparin production in the pharmaceutical industry.

| S-EPMC6475493 | biostudies-literature

Solvent minimization induces preferential orientation and crystal clustering in serial micro-crystallography on micro-meshes, in situ plates and on a movable crystal conveyor belt.

Project description:X-ray diffraction data were obtained at the National Synchrotron Light Source from insulin and lysozyme crystals that were densely deposited on three types of surfaces suitable for serial micro-crystallography: MiTeGen MicroMeshes™, Greiner Bio-One Ltd in situ micro-plates, and a moving kapton crystal conveyor belt that is used to deliver crystals directly into the X-ray beam. 6° wedges of data were taken from ?100 crystals mounted on each material, and these individual data sets were merged to form nine complete data sets (six from insulin crystals and three from lysozyme crystals). Insulin crystals have a parallelepiped habit with an extended flat face that preferentially aligned with the mounting surfaces, impacting the data collection strategy and the design of the serial crystallography apparatus. Lysozyme crystals had a cuboidal habit and showed no preferential orientation. Preferential orientation occluded regions of reciprocal space when the X-ray beam was incident normal to the data-collection medium surface, requiring a second pass of data collection with the apparatus inclined away from the orthogonal. In addition, crystals measuring less than 20?µm were observed to clump together into clusters of crystals. Clustering required that the X-ray beam be adjusted to match the crystal size to prevent overlapping diffraction patterns. No additional problems were encountered with the serial crystallography strategy of combining small randomly oriented wedges of data from a large number of specimens. High-quality data able to support a realistic molecular replacement solution were readily obtained from both crystal types using all three serial crystallography strategies.

| S-EPMC4211130 | biostudies-literature

Optimizing Ultrasound-Assisted Deep Eutectic Solvent Extraction of Bioactive Compounds from Chinese Wild Rice.

Project description:In this study, deep eutectic solvents (DESs) were used for the ultrasound-assisted extraction (UAE) of valuable bioactive compounds from Chinese wild rice (Zizania spp.). To this end, 7 different choline chloride (CC)-based DESs were tested as green extraction solvents. Choline chloride/1,4-butanediol (DES-2) exhibited the best extraction efficiency in terms of parameters such as the total flavonoid content (TFC), total phenolic content (TPC), and free radical scavenging capacity (DPPH● and ABTS●+). Subsequently, the UAE procedure using 76.6% DES-2 was also optimized: An extraction temperature of 51.2 °C and a solid-liquid ratio of 37.0 mg/mL were considered optimal by a Box-Behnken experiment. The optimized extraction procedure proved efficient for the extraction of 9 phenolic and 3 flavonoid compounds from Chinese wild rice as determined by quantification based on ultra-performance liquid chromatography-triple quadrupole tandem mass spectrometry (UPLC-QqQ-MS). This work, thus, demonstrates the possibility of customizing green solvents that offer greater extraction capacity than that of organic solvents.

| S-EPMC6696331 | biostudies-literature

Preparation of Polypropylene Micro and Nanofibers by Electrostatic-Assisted Melt Blown and Their Application.

Project description:In this paper, a novel electrostatic-assisted melt blown process was reported to produce polypropylene (PP) microfibers with a diameter as fine as 600 nm. The morphology, web structure, pore size distribution, filtration efficiency, and the stress and strain behavior of the PP nonwoven fabric thus prepared were characterized. By introducing an electrostatic field into the conventional melt-blown apparatus, the average diameter of the melt-blown fibers was reduced from 1.69 to 0.96 μm with the experimental setup, and the distribution of fiber diameters was narrower, which resulted in a filter medium with smaller average pore size and improved filtration efficiency. The polymer microfibers prepared by this electrostatic-assisted melt blown method may be adapted in a continuous melt blown process for the production of filtration media used in air filters, dust masks, and so on.

| S-EPMC6403903 | biostudies-literature

Morphologically Diverse Micro- and Macrostructures Created via Solvent Evaporation-Induced Assembly of Fluorescent Spherical Particles in the Presence of Polyethylene Glycol Derivatives.

Project description:The creation of fluorescent micro- and macrostructures with the desired morphologies and sizes is of considerable importance due to their intrinsic functions and performance. However, it is still challenging to modulate the morphology of fluorescent organic materials and to obtain insight into the factors governing the morphological evolution. We present a facile bottom-up approach to constructing diverse micro- and macrostructures by connecting fluorescent spherical particles (SPs), which are generated via the spherical assembly of photoisomerizable azobenzene-based propeller-shaped chromophores, only with the help of commercially available polyethylene glycol (PEG) derivatives. Without any extra additives, solvent evaporation created a slow morphological evolution of the SPs from short linear chains (with a length of a few micrometers) to larger, interconnected networks and sheet structures (ranging from tens to >100 µm) at the air-liquid interface. Their morphologies and sizes were significantly dependent on the fraction and length of the PEG. Our experimental results suggest that noncovalent interactions (such as hydrophobic forces and hydrogen bonding) between the amphiphilic PEG chains and the relatively hydrophobic SPs were weak in aqueous solutions, but play a crucial role in creating the morphologically diverse micro- and macrostructures. Moreover, short-term irradiation with visible light caused fast morphological crumpling and fluorescence switching of the obtained structures.

| S-EPMC8304015 | biostudies-literature

Facile Fabrication of Self-Similar Hierarchical Micro-Nano Structures for Multifunctional Surfaces via Solvent-Assisted UV-Lasering.

Project description:Cross-scale self-similar hierarchical micro-nano structures in living systems often provide unique features on surfaces and serve as inspiration sources for artificial materials or devices. For instance, a highly self-similar structure often has a higher fractal dimension and, consequently, a larger active surface area; hence, it would have a super surface performance compared to its peer. However, artificial self-similar surfaces with hierarchical micro-nano structures and their application development have not yet received enough attention. Here, by introducing solvent-assisted UV-lasering, we establish an elegant approach to fabricate self-similar hierarchical micro-nano structures on silicon. The self-similar structure exhibits a super hydrophilicity, a high light absorbance (>90%) in an ultra-broad spectrum (200-2500 nm), and an extraordinarily high efficiency in heat transfer. Through further combinations with other techniques, such surfaces can be used for capillary assembling soft electronics, surface self-cleaning, and so on. Furthermore, such an approach can be transferred to other materials with minor modifications. For instance, by doping carbon in polymer matrix, a silicone surface with hierarchical micro-nano structures can be obtained. By selectively patterning such hierarchical structures, we obtained an ultra-high sensitivity bending sensor. We believe that such a fabrication technique of self-similar hierarchical micro-nano structures may encourage researchers to deeply explore the unique features of functional surfaces with such structures and to further discover their potentials in various applications in diverse directions.

| S-EPMC7407878 | biostudies-literature

Acoustofluidic separation of prolate and spherical micro-objects.

Project description:Most microfluidic separation techniques rely largely on object size as a separation marker. The ability to separate micro-objects based on their shape is crucial in various biomedical and chemical assays. Here, we develop an on-demand, label-free acoustofluidic method to separate prolate ellipsoids from spherical microparticles based on traveling surface acoustic wave-induced acoustic radiation force and torque. The freely rotating non-spherical micro-objects were aligned under the progressive acoustic field by the counterrotating radiation torque, and the major axis of the prolate ellipsoids was parallel to the progressive wave propagation. The specific alignment of the ellipsoidal particles resulted in a reduction in the cross-sectional area perpendicular to the wave propagation. As a consequence, the acoustic backscattering decreased, resulting in a decreased magnitude of the radiation force. Through the variation in radiation force, which depended on the micro-object morphology enabled the acoustofluidic shape-based separation. We conducted numerical simulations for the wave scattering of spherical and prolate objects to elucidate the working mechanism underlying the proposed method. A series of experiments with polystyrene microspheres, prolate ellipsoids, and peanut-shaped microparticles were performed for validation. Through quantitative analysis of the separation efficiency, we confirmed the high purity and high recovery rate of the proposed acoustofluidic shape-based separation of micro-objects. As a bioparticle, we utilize Thalassiosira eccentrica to perform shape-based separation, as the species has a variety of potential applications in drug delivery, biosensing, nanofabrication, bioencapsulation and immunoisolation.

| S-EPMC10784511 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data