Browse
Submit Data
Databases
API
Help

Dataset Information

26 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Inertial and viscous flywheel sensing of nanoparticles.

ABSTRACT: Rotational dynamics often challenge physical intuition while enabling unique realizations, from the rotor of a gyroscope that maintains its orientation regardless of the outer gimbals, to a tennis racket that rotates around its handle when tossed face-up in the air. In the context of inertial sensing, which can measure mass with atomic precision, rotational dynamics are normally considered a complication hindering measurement interpretation. Here, we exploit the rotational dynamics of a microfluidic device to develop a modality in inertial sensing. Combining theory with experiments, we show that this modality measures the volume of a rigid particle while normally being insensitive to its density. Paradoxically, particle density only emerges when fluid viscosity becomes dominant over inertia. We explain this paradox via a viscosity-driven, hydrodynamic coupling between the fluid and the particle that activates the rotational inertia of the particle, converting it into a 'viscous flywheel'. This modality now enables the simultaneous measurement of particle volume and mass in fluid, using a single, high-throughput measurement.

SUBMITTER: Katsikis G

PROVIDER: S-EPMC8385060 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Universality in the viscous-to-inertial coalescence of liquid droplets.

Project description:We present a theory on the coalescence of 2 spherical liquid droplets that are initially stationary. The evolution of the radius of a liquid neck formed upon coalescence was formulated as an initial value problem and then solved to yield an exact solution without free parameters, with its 2 asymptotic approximations reproducing the well-known scaling relations in the inertially limited viscous and inertial regimes. The viscous-to-inertial crossover observed in previous research is also recovered by the theory, rendering the collapse of data of different viscosities onto a single curve.

| S-EPMC6876233 | biostudies-literature

Muscle and Systemic Molecular Responses to a Single Flywheel Based Iso-Inertial Training Session in Resistance-Trained Men.

Project description:Growing evidence points to the effectiveness of flywheel (FW) based iso-inertial resistance training in improving physical performance capacities. However, molecular adaptations induced by FW exercises are largely unknown. Eight resistance-trained men performed 5 sets of 10 maximal squats on a FW device. Muscle biopsies (fine needle aspiration technique) and blood samples were collected before (t0), and 2 h (t1) after FW exercise. Blood samples were additionally drawn after 24 h (t2) and 48 h (t3). Paired samples t-tests revealed significant increases, at t1, of mRNA expression of the genes involved in inflammation, in both muscle (MCP-1, TNF-α, IL-6) and peripheral blood mononuclear cells (IkB-α, MCP-1). Circulating extracellular vesicles (EVs) and EV-encapsulated miRNA levels (miR-206, miR-146a) significantly increased at t1 as well. Conversely, muscle mRNA level of genes associated with muscle growth/remodeling (IGF-1Ea, cyclin D1, myogenin) decreased at t1. One-way repeated measure ANOVAs, with Bonferroni corrected post-hoc pairwise comparisons, revealed significant increases in plasma concentrations of IL-6 (t1; t2; t3) and muscle creatine kinase (t1; t2), while IGF-1 significantly increased at t2 only. Our findings show that, even in experienced resistance trained individuals, a single FW training session modifies local and systemic markers involved in late structural remodeling and functional adaptation of skeletal muscle.

| S-EPMC6521220 | biostudies-literature

Single-Element Dual-Interferometer for Precision Inertial Sensing.

Project description:Tracking moving masses in several degrees of freedom with high precision and large dynamic range is a central aspect in many current and future gravitational physics experiments. Laser interferometers have been established as one of the tools of choice for such measurement schemes. Using sinusoidal phase modulation homodyne interferometry allows a drastic reduction of the complexity of the optical setup, a key limitation of multi-channel interferometry. By shifting the complexity of the setup to the signal processing stage, these methods enable devices with a size and weight not feasible using conventional techniques. In this paper we present the design of a novel sensor topology based on deep frequency modulation interferometry: the self-referenced single-element dual-interferometer (SEDI) inertial sensor, which takes simplification one step further by accommodating two interferometers in one optic. Using a combination of computer models and analytical methods we show that an inertial sensor with sub-picometer precision for frequencies above 10 mHz, in a package of a few cubic inches, seems feasible with our approach. Moreover we show that by combining two of these devices it is possible to reach sub-picometer precision down to 2 mHz. In combination with the given compactness, this makes the SEDI sensor a promising approach for applications in high precision inertial sensing for both next-generation space-based gravity missions employing drag-free control, and ground-based experiments employing inertial isolation systems with optical readout.

| S-EPMC7506752 | biostudies-literature

Inertial flywheel knee- and hip-dominant hamstring strength exercises in professional soccer players: Muscle use and velocity-based (mechanical) eccentric overload

Project description:The primary aim of the present study was to analyze mechanical responses during inertial knee- and hip-dominant hamstring strengthening exercises (flywheel leg-curl and hip-extension in conic-pulley), and the secondary aim was to measure and compare regional muscle use using functional magnetic resonance imaging. Mean power, peak power, mean velocity, peak velocity and time in the concentric (CON) and eccentric (ECC) phases were measured. The transverse relaxation time (T2) shift from pre- to post-exercise were calculated for the biceps femoris long (BFl) and short (BFs) heads, semitendinosus (ST) and semimembranosus (SM) muscles at proximal, middle and distal areas of the muscle length. Peak and mean power in flywheel leg-curl were higher during the CON than the ECC phase (p<0.01). ECC peak power was higher than CON phase (p<0.01) in conic-pulley hip-extension exercise, while mean power was higher during the CON than ECC phase (p<0.01). Flywheel leg-curl showed a higher T2 values in ST and BFs and BFl (p<0.05), while the conic-pulley hip-extension had a higher T2 values in the proximal region of the ST and BFl (p<0.05). In conclusion, ECC overload was only observed in peak power during the conic-pulley hip-extension exercise. Flywheel leg-curl involved a greater overall use of the 4 muscle bellies, more specifically in the ST and BFs, with a selective augmented activity (compared with the conic-pulley) in the 3 regions of the BFs, while conic-pulley hip-extension exercise selectively targeted the proximal and medial regions of the BFl. Physiotherapists and strength and conditioning coaches should consider this when optimizing the training and recovery process for hamstring muscles, especially after injury.

| S-EPMC7531833 | biostudies-literature

Validity of an inertial system for measuring velocity, force, and power during hamstring exercises performed on a flywheel resistance training device.

Project description:BackgroundInertial hamstring exercises promote functional changes leading to lower rates of hamstring injuries. However, variable training measurement systems have not been specifically validated for hamstring exercises. Accordingly, this study aimed to evaluate the validity of the Inertial Measurement System (IMS) to measure the velocity, force, and power during the performance of different hamstring exercises on a flywheel resistance training device.MethodsFifteen males (average age: 22.4 ± 2.5 years; body mass: 77.3 ± 9.8 kg; height: 179.5 ± 7.4 cm; weekly physical activity: 434.0 ± 169.2 min; years of strength training: 4.3 ± 2.2 years) performed the bilateral stiff-leg deadlift (SDL), 45° hip extension (HE), and unilateral straight knee bridge (SKB) in two sessions (familiarization and evaluation) with a 1-week interval between them. The velocity, force, and power (average and peak values) in the concentric and eccentric phases for each of the exercises were recorded simultaneously with IMS and MuscleLab.ResultsConsistency between IMS and MuscleLab was good to excellent for all variables, with r ranges from 0.824 to 0.966 in SDL, from 0.822 to 0.971 in HE, and from 0.806 to 0.969 in SKB. Acceptable levels of agreement between devices were observed in general for all exercises, the "bias" ranging from 1.1% to 13.2%. Although MuscleLab showed higher values than IMS for peak velocity, force and power values, the effect size was only relevant for 5 of the 36 parameters. IMS is a new and valid system to monitor inertial hamstring exercises on a new flywheel device. In this way, IMS could have potential practical applications for any professional or athlete who wants to monitor inertial hamstring exercises.

| S-EPMC7549468 | biostudies-literature

Dynamics of superparamagnetic nanoparticles in viscous liquids in rotating magnetic fields.

Project description:The dynamics of magnetic nanoparticles in a viscous liquid in a rotating magnetic field has been studied by means of numerical simulations and analytical calculations. In the magneto-dynamics approximation three different modes of motion of the unit magnetization vector and particle director are distinguished depending on frequency and amplitude of the rotating magnetic field. The specific absorption rate of a dilute assembly of superparamagnetic nanoparticles in rotating magnetic field is calculated by solving the Landau-Lifshitz stochastic equation for the unit magnetization vector and the stochastic equation for the particle director. At elevated frequencies an optimal range of particle diameters is found where the specific absorption rate of an assembly in a rotating magnetic field has a maximum. It is shown that with an optimal choice of the particle sizes sufficiently large SAR values of the order of 400-500 W/g can be obtained in a rotating magnetic field with a frequency f = 400 kHz and a moderate magnetic field amplitude H 0 = 100 Oe.

| S-EPMC6880845 | biostudies-literature

Assessment of Upper Limb Movement Impairments after Stroke Using Wearable Inertial Sensing.

Project description:Precise and objective assessments of upper limb movement quality after strokes in functional task conditions are an important prerequisite to improve understanding of the pathophysiology of movement deficits and to prove the effectiveness of interventions. Herein, a wearable inertial sensing system was used to capture movements from the fingers to the trunk in 10 chronic stroke subjects when performing reach-to-grasp activities with the affected and non-affected upper limb. It was investigated whether the factors, tested arm, object weight, and target height, affect the expressions of range of motion in trunk compensation and flexion-extension of the elbow, wrist, and finger during object displacement. The relationship between these metrics and clinically measured impairment was explored. Nine subjects were included in the analysis, as one had to be excluded due to defective data. The tested arm and target height showed strong effects on all metrics, while an increased object weight showed effects on trunk compensation. High inter- and intrasubject variability was found in all metrics without clear relationships to clinical measures. Relating all metrics to each other resulted in significant negative correlations between trunk compensation and elbow flexion-extension in the affected arm. The findings support the clinical usability of sensor-based motion analysis.

| S-EPMC7506737 | biostudies-literature

Prediction of Passive Membrane Permeability by Semi-Empirical Method Considering Viscous and Inertial Resistances and Different Rates of Conformational Change and Diffusion.

Project description:Membrane permeability is an important property of drugs in adsorption. Many prediction methods work well for small molecules, but the prediction of middle-molecule permeability is still difficult. In the present study, we modified a classical permeability model based on Fick's law to study passive membrane permeability. The model consisted of the distribution of solute from water to membrane and the diffusion of solute in each solvent. The diffusion coefficient is the inverse of the resistance, and we examined the inertial resistance in addition to the viscous resistance, the latter of which has been widely used in permeability prediction. Also, we examined three models changing the balance between the diffusion of solute in membrane and the conformational change of solute. The inertial resistance improved the prediction results in addition to the viscous resistance. The models worked well not only for small molecules but also for middle molecules, whose structures have more conformational freedom.

| S-EPMC7050510 | biostudies-literature

Functional estimation of bony segment lengths using magneto-inertial sensing: Application to the humerus.

Project description:Inertial sensor technology has assumed an increasingly important role in the field of human motion analysis. However, the reliability of the kinematic estimates could still be critical for specific applications in the field of functional evaluation and motor rehabilitation. Within this context, the definition of subject-specific multi-body kinematic models is crucial since it affects the accuracy and repeatability of movement reconstruction. A key step for kinematic model calibration is the determination of bony segment lengths. This study proposes a functional approach for the in vivo estimation of the humerus length using a single magneto-inertial measurement unit (MIMU) positioned on the right distal posterior forearm. The humerus length was estimated as the distance between the shoulder elevation axis and the elbow flexion-extension axis. The calibration exercise involved five shoulder elevations in the sagittal plane with the elbow completely extended and five elbow flexion-extensions with the upper arm rigidly aligned to the trunk. Validation of the method was conducted on five healthy subjects using the humerus length computed from magnetic resonance imaging as the gold standard. The method showed mean absolute errors of 12 ± 9 mm, which were in the estimate of the humerus length. When using magneto-inertial technology, the proposed functional method represents a promising alternative to the regressive methods or manual measurements for performing kinematic model calibrations. Although the proposed methodology was validated for the estimation of the humerus length, the same approach can be potentially extended to other body segments.

| S-EPMC6135500 | biostudies-literature

A Narrative Review on Contemporary and Emerging Uses of Inertial Sensing in Occupational Ergonomics.

Project description:Accurate, reliable, and cost-effective quantification of real-time biomechanical exposures in occupational settings remains an enduring pursuit in ergonomics. Miniaturized, wireless, body-worn inertial sensors offer opportunities to directly measure vast and personalized kinematics data in both laboratory and applied settings. This review investigated the contemporary and emerging uses of wearable inertial sensing technology in occupational ergonomics research related to biomechanical exposure assessment in physical work. A review and narrative synthesis of 78 peer-reviewed studies was conducted. A conceptual framework was used for scoping and synthesizing the reviewed scientific literature. Review findings help to contextualize contributions of this emerging technology to the broader goals of reducing work-relevant musculoskeletal trauma disorders. The review made evident that despite the growing interest in wearable inertial sensing technologies for ergonomics research, its use in applied settings still lags. The review also identified differences in sensor attachment locations and methods and measures for calibration and validation, and inconsistent criteria for reporting and assessing biomechanical exposures even across studies with similar objectives. Emerging applications include combining inertial sensing with predictive modeling for obtaining cumulative exposure data, and providing real-time feedback about biomechanical work demands. The manuscript concludes with research directions for enabling inertial sensing technologies as a tool for online biomechanical exposure assessment and feedback, which has particular appeal in non-repetitive work settings.

| S-EPMC7985982 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data