Browse
Submit Data
Databases
API
Help

Dataset Information

16 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Effective Magnetic MOFs Adsorbent for the Removal of Bisphenol A, Tetracycline, Congo Red and Methylene Blue Pollutions.

ABSTRACT: A magnetic metal-organic frameworks adsorbent (Fe₃O₄@MIL-53(Al)) was prepared by a typical solvothermal method for the removal of bisphenol A (BPA), tetracycline (TC), congo red (CR), and methylene blue (MB). The prepared Fe₃O₄@MIL-53(Al) composite adsorbent was well characterized by scanning electron microscope (SEM), transmission electron microscope (TEM), X-ray diffraction (XRD), and fourier transform infrared spectrometer (FTIR). The influence of adsorbent quantity, adsorption time, pH and ionic strength on the adsorption of the mentioned pollutants were also studied by a UV/Vis spectrophotometer. The adsorption capacities were found to be 160.9 mg/g for BPA, 47.8 mg/g for TC, 234.4 mg/g for CR, 70.8 mg/g for MB, respectively, which is superior to the other reported adsorbents. The adsorption of BPA, TC, and CR were well-fitted by the Langmuir adsorption isotherm model, while MB followed the Freundlich model, while the adsorption kinetics data of all pollutants followed the pseudo-second-order kinetic models. The thermodynamic values, including the enthalpy change (ΔH°), the Gibbs free energy change (ΔG°), and entropy change (ΔS°), showed that the adsorption processes were spontaneous and exothermic entropy-reduction process for BPA, but spontaneous and endothermic entropy-increasing processes for the others. The Fe₃O₄@MIL-53(Al) was also found to be easily separated after external magnetic field, can be a potential candidate for future water treatment.

SUBMITTER: Zhang G

PROVIDER: S-EPMC8398004 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Removal of Congo Red and Methylene Blue from Aqueous Solutions by Vermicompost-Derived Biochars.

Project description:Biochars, produced by pyrolyzing vermicompost at 300, 500, and 700°C were characterized and their ability to adsorb the dyes Congo red (CR) and Methylene blue (MB) in an aqueous solution was investigated. The physical and chemical properties of biochars varied significantly based on the pyrolysis temperatures. Analysis of the data revealed that the aromaticity, polarity, specific surface area, pH, and ash content of the biochars increased gradually with the increase in pyrolysis temperature, while the cation exchange capacity, and carbon, hydrogen, nitrogen and oxygen contents decreased. The adsorption kinetics of CR and MB were described by pseudo-second-order kinetic models. Both of Langmuir and Temkin model could be employed to describe the adsorption behaviors of CR and MB by these biochars. The biochars generated at higher pyrolysis temperature displayed higher CR adsorption capacities and lower MB adsorption capacities than those compared with the biochars generated at lower pyrolysis temperatures. The biochar generated at the higher pyrolytic temperature displayed the higher ability to adsorb CR owing to its promoted aromaticity, and the cation exchange is the key factor that positively affects adsorption of MB.

| S-EPMC4856393 | biostudies-literature

Removal of Methylene Blue and Congo Red Using Adsorptive Membrane Impregnated with Dried Ulva fasciata and Sargassum dentifolium.

Project description:Biosorption is a bioremediation approach for the removal of harmful dyes from industrial effluents using biological materials. This study investigated Methylene blue (M. blue) and Congo red (C. red) biosorption from model aqueous solutions by two marine macro-algae, Ulva fasciata and Sargassum dentifolium, incorporated within acrylic fiber waste to form composite membranes, Acrylic fiber-U. fasciata (AF-U) and Acrylic fiber-S. dentifolium (AF-S), respectively. The adsorption process was designed to more easily achieve the 3R process, i.e., removal, recovery, and reuse. The process of optimization was implemented through one factor at a time (OFAT) experiments, followed by a factorial design experiment to achieve the highest dye removal efficiency. Furthermore, isotherm and kinetics studies were undertaken to determine the reaction nature. FT-IR and SEM analyses were performed to investigate the properties of the membrane. The AF-U membrane showed a significant dye removal efficiency, of 88.9% for 100 ppm M. blue conc. and 79.6% for 50 ppm C. red conc. after 240 min sorption time. AF-S recorded a sorption capacity of 82.1% for 100 ppm M. blue conc. after 30 min sorption time and 85% for 100 ppm C. red conc. after 240 min contact time. The membranes were successfully applied in the 3Rs process, in which it was found that the membranes could be used for five cycles of the removal process with stable efficiency.

| S-EPMC7922868 | biostudies-literature

Amido-Functionalized Magnetic Metal-Organic Frameworks Adsorbent for the Removal of Bisphenol A and Tetracycline.

Project description:In this paper, amido-functionalized MOFs with core/shell magnetic particles (Fe3O4@MIL-53(Al)-NH2) was prepared by the solvothermal method and characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), Fourier transform infrared (FT-IR), Vibrating Sample Magnetometer (VSM) and UV/VIS spectrophotometer. The influence of different factors on the adsorption effect of the pollutant, including adsorbent amounts, adsorption time, ionic strength and pH, were explored. It was found that the amine-decorated Fe3O4@MIL-53(Al)-NH2 were efficient for removal of contaminant, with the adsorption capacity for bisphenol A (234.1 mg/g) and tetracycline (84.8 mg/g) under the optimized conditions. The adsorption kinetics and the equilibrium adsorption data indicated that the adsorption process of BPA and TC was more compatible with the pseudo-second-order kinetic model and the Langmuir model, respectively. The thermodynamic values show the adsorption of the mentioned contaminant was spontaneous and endothermic. Moreover, the Fe3O4@MIL-53(Al)-NH2 adsorbent had good regeneration and reusability capacity after five cyclic utilization. All these results show Fe3O4@MIL-53(Al)-NH2 adsorbent could be a potential candidate for future water purification.

| S-EPMC8377470 | biostudies-literature

Use of Ionic Liquid Pretreated and Fermented Sugarcane Bagasse as an Adsorbent for Congo Red Removal.

Project description:A large amount of industrial wastewater containing pollutants including toxic dyes needs to be processed prior to its discharge into the environment. Biological materials such as sugarcane bagasse (SB) have been reported for their role as adsorbents to remove the dyes from water. In this study, the residue SB after fermentation was utilized for the dye removal. A combined pretreatment of NaOH and methyltrioctylammonium chloride was given to SB for lignin removal, and the pretreated SB was utilized for cellulase production from Bacillus aestuarii UE25. The strain produced 118 IU mL-1 of endoglucanse and 70 IU mL-1 of β-glucosidase. Scanning electron microscopy and FTIR spectra showed lignin and cellulose removal in fermented SB. This residue was utilized for the adsorption of an azo dye, congo red (CR). The thermodynamic, isotherm and kinetics studies for the adsorption of CR revealed distinct adsorption features of SB. Untreated SB followed Langmuir isotherm, whereas pretreated SB and fermented SB obeyed the Freundlich isotherm model. The pseudo-second-order model fitted well for the studied adsorbents. The results of thermodynamic studies revealed spontaneous adsorption with negative standard free energy values. Untreated SB showed a 90.36% removal tendency at 303.15 K temperature, whereas the adsorbents comprised of pretreated and fermented SB removed about 98.35% and 97.70%, respectively. The study provided a strategy to utilize SB for cellulase production and its use as an adsorbent for toxic dyes removal.

| S-EPMC8622147 | biostudies-literature

Hierarchically porous SiO2/C hollow microspheres: a highly efficient adsorbent for Congo Red removal.

Project description:Hierarchically porous SiO2/C hollow microspheres (HPSCHMs) were synthesized by a hydrothermal and NaOH-etching combined route. The adsorption performance of the prepared HPSCHMs was investigated to remove Congo Red (CR) in aqueous solution. The results show that the synthesized composite possesses a hollow microspherical structure with hierarchical pores and a diameter of about 100-200 nm, and its surface area is up to 1154 m2 g-1. This material exhibits a remarkable adsorption performance for CR in solution, and its maximum adsorption amount for CR can reach up to 2512 mg g-1. It shows faster adsorption and much higher adsorption capacity than the commercial AC and γ-Al2O3 samples under the same conditions. The studies of the kinetics and thermodynamics indicate that the adsorption of CR on the PHSCHM sample obeys the pseudo-second order model well and belongs to physisorption. The adsorption activation energy is about 7.72 kJ mol-1. In view of the hierarchically meso-macroporous structure, large surface area and pore volume, the HPSCHM material could be a promising adsorbent for removal of pollutants, and it could also be used as a catalyst support.

| S-EPMC9080780 | biostudies-literature

Twigs-derived activated carbons via H3PO4/ZnCl2 composite activation for methylene blue and congo red dyes removal.

Project description:This work is aimed at evaluating the conversion of Pterocarpus indicus twigs into activated carbon via composite chemical activation for methylene blue and congo red dyes adsorption. The activated carbons were prepared by single-step chemical activation using zinc chloride and/or phosphoric acid at different mass impregnation ratios at 600 °C for 90 min. The activated carbons were characterized for textural properties and surface chemistry. The batch adsorption was investigated at different concentrations (5-1,000 mg/L), contact times (2-540 min) and temperatures (30-60 °C). Phosphoric acid-activated twigs carbon showed a high surface area of 1,445 m2/g with maximum methylene blue adsorption capacity of 438 mg/g. On the other hand, a composite-activated carbon yields a 217 mg/g of congo red removal. The adsorption data for both dyes fitted well with Langmuir and pseudo-second-order kinetics models, indicating the predominance of chemical adsorption through monolayer coverage of dye molecules on the homogenous surface of activated carbon. The thermodynamics properties of dye adsorption onto twigs-derived activated carbons indicated that the process is endothermic, spontaneous and favourable at high temperature. Overall, activated carbons derived from Pterocarpus indicus twigs could be effectively used for dye wastewater treatment.

| S-EPMC7441319 | biostudies-literature

Experimental and Theoretical Insights on Methylene Blue Removal from Wastewater Using an Adsorbent Obtained from the Residues of the Orange Industry.

Project description:Chemical and thermochemical transformations were performed on orange peel to obtain materials that were characterized and further tested to explore their potential as adsorbents for the removal of methylene blue (MB) from aqueous solutions. The results show the high potential of some of these materials for MB adsorption not only due to the surface area of the resulting substrate but also to the chemistry of the corresponding surface functional groups. Fitting of the kinetic as well as the equilibrium experimental data to different models suggests that a variety of interactions are involved in MB adsorption. The overall capacities for these substrates (larger than 192.31 mg g-1) were found to compare well with those reported for activated carbon and other adsorbents of agro-industrial origin. According to these results and complementary with theoretical study using Density Functional Theory (DFT) approximations, it was found that the most important adsorption mechanisms of MB correspond to: (i) electrostatic interactions, (ii) H-bonding, and (iii) π (MB)-π (biochar) interactions. In view of these findings, it can be concluded that adsorbent materials obtained from orange peel, constitute a good alternative for the removal of MB dye from aqueous solutions.

| S-EPMC8348386 | biostudies-literature

Syringa vulgaris leaves powder a novel low-cost adsorbent for methylene blue removal: isotherms, kinetics, thermodynamic and optimization by Taguchi method.

Project description:In this study, the potential of a new low-cost adsorbent, Syringa vulgaris leaves powder, for methylene blue adsorption from aqueous solution was investigated. The adsorbent surface was examined using SEM and FTIR techniques. The experiments were conducted, in batch system, to find out the effect of pH, contact time, adsorbent dose, initial dye concentration, temperature and ionic strength on dye adsorption. The process is best described by Langmuir isotherm and the pseudo second order kinetic model. Maximum adsorption capacity, 188.2 (mg g-1), is better than other similar adsorbent materials. Thermodynamic parameters revealed a spontaneous and endothermic process, suggesting a physisorption mechanism. A Taguchi orthogonal array (L27) experimental design was used to determine the optimum conditions for the removal of dye. Various desorbing agents were used to investigate the regeneration possibility of used adsorbent. Results suggest that the adsorbent material is very effective for removal of methylene blue from aqueous solutions.

| S-EPMC7810873 | biostudies-literature

An ATR-FTIR Sensor Unraveling the Drug Intervention of Methylene Blue, Congo Red, and Berberine on Human Tau and A?.

Project description:Alzheimer's disease affects millions of human beings worldwide. The disease progression is characterized by the formation of plaques and neurofibrillary tangles in the brain, which are based on aggregation processes of the A? peptide and tau protein. Today there is no cure and even no in vitro assay available for the identification of drug candidates, which provides direct information concerning the protein secondary structure label-free. Therefore, we developed an attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) sensor, which uses surface bound antibodies to immobilize a desired target protein. The secondary structure of the protein can be evaluated based on the secondary structure sensitive frequency of the amide I band. Direct information about the effect of a drug candidate on the secondary structure distribution of the total target protein fraction within the respective body fluid can be detected by a frequency shift of the amide I band. Thereby, the extent of the amide I shift is indicative for the compound efficiency. The functionality of this approach was demonstrated by the quantification of the effect of the drug candidate methylene blue on the pathogenic misfolded tau protein as extracted from cerebrospinal fluid (CSF). Methylene blue induces a shift from pathogenic folded ?-sheet dominated to the healthy monomeric state. A similar effect was observed for congo red on pathogenic A? isoforms from CSF. In addition, the effect of berberine on synthetic A?1-42 is studied. Berberine seems to decelerate the aggregation process of synthetic A?1-42 peptides.

| S-EPMC5512126 | biostudies-literature

Preparation of new adsorbent-supported Fe/Ni particles for the removal of crystal violet and methylene blue by a heterogeneous Fenton-like reaction.

Project description:Prepared material-supported Fe/Ni particles (PM-Fe/Ni) were produced and applied as an adsorbent, reductant and Fenton-like catalyst for removing methylene blue (MB) and crystal violet (CV) from aqueous solutions. Fe/Ni particles were prepared by reducing ferric chloride with sodium borohydride and supported on the produced porous material. Various techniques including X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET), Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy analysis (SEM) were employed to characterize the crystal phase, surface area, surface morphology and functional groups. Removal experiments were conducted to study the effects of different factors such as PM-Fe/Ni dosage, initial pH, H2O2 concentration, initial concentrations and temperature on MB and CV removal. The removal efficiency of CV and MB by PM-Fe/Ni/H2O2 were 91.86% and 61.41% under the conditions of dye concentration of 1000 mg L-1, H2O2 concentration of 50 mM, PM-Fe/Ni dosage of 0.20 g and temperature of 293 K. The analysis of the degradation kinetics showed that the degradation of MB and CV followed well pseudo-first-order kinetics. A possible mechanism of removal of MB and CV was proposed, including the adsorption, reduction and dominating Fenton oxidation. The regeneration experiments of PM-Fe/Ni demonstrated that PM-Fe/Ni with H2O2 still showed a high removal efficiency after six reaction cycles.

| S-EPMC9066707 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data