Browse
Submit Data
Databases
API
Help

Dataset Information

20 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Direct Writing Corrugated PVC Gel Artificial Muscle via Multi-Material Printing Processes.

ABSTRACT: Electroactive PVC gel is a new artificial muscle material with good performance that can mimic the movement of biological muscle in an electric field. However, traditional manufacturing methods, such as casting, prevent the broad application of this promising material because they cannot achieve the integration of the PVC gel electrode and core layer, and at the same time, it is difficult to create complex and diverse structures. In this study, a multi-material, integrated direct writing method is proposed to fabricate corrugated PVC gel artificial muscle. Inks with suitable rheological properties were developed for printing four functional layers, including core layers, electrode layers, sacrificial layers, and insulating layers, with different characteristics. The curing conditions of the printed CNT/SMP inks under different applied conditions were also discussed. The structural parameters were optimized to improve the actuating performance of the PVC gel artificial muscle. The corrugated PVC gel with a span of 1.6 mm had the best actuating performance. Finally, we printed three layers of corrugated PVC gel artificial muscle with good actuating performance. The proposed method can help to solve the inherent shortcomings of traditional manufacturing methods of PVC gel actuators. The printed structures have potential applications in many fields, such as soft robotics and flexible electronic devices.

SUBMITTER: Luo B

PROVIDER: S-EPMC8400140 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Research on rice starch gel preparation and crosslink network structure-rheological property based on direct-writing 3D printing.

Project description:Amylopectin and amylose components are natural polymers within rice starch granules, intertwined in specific conditions to form gel polymerized with pore crosslink network, has potential printing properties. In this study, a rice starch gel preparation scheme is proposed for stable properties, and starch granule phase transition mechanism is analyzed based on RVA test during preparation, it can be divided into four-stage, swelling, reacting, homogenizing and self-assembling stages. Gel surface tension and contact angle tested with starch concentration effect, a correlation is developed, reflecting a competition result to gel droplet macro-morphology between the intermolecular cohesion and crosslink network. SEM is used to reveal typical crosslink structures of different starch molecular component proportions, providing objective support for starch gel rheologic property change. Results indicate gel interior crosslink network formed under concentration 12 %, the gel with amylose 4.475 % presents better printing accuracy. Gel shear modulus positively correlated with amylose proportion. Japonica gel under 20 % is of higher viscosity and rapid reassembly ability after interior crosslink network is broken. Max dynamic viscosity is positively correlated with starch concentration. The study aims to provide theoretical and practical support for in-depth analysis of rice starch material application in direct-write 3D printing.

| S-EPMC10825446 | biostudies-literature

Design of a Waterborne Polyurethane-Urea Ink for Direct Ink Writing 3D Printing.

Project description:In this work, polycaprolactone-polyethylene glycol (PCL-PEG) based waterborne polyurethane-urea (WBPUU) inks have been developed for an extrusion-based 3D printing technology. The WBPUU, synthesized from an optimized ratio of hydrophobic polycaprolactone diol and hydrophilic polyethylene glycol (0.2:0.8) in the soft segment, is able to form a physical gel at low solid contents. WBPUU inks with different solid contents have been synthesized. The rheology of the prepared systems was studied and the WBPUUs were subsequently used in the printing of different pieces to demonstrate the relationship between their rheological properties and their printing viability, establishing an optimal window of compositions for the developed WBPUU based inks. The results showed that the increase in solid content results in more structured inks, presenting a higher storage modulus as well as lower tan δ values, allowing for the improvement of the ink's shape fidelity. However, an increase in solid content also leads to an increase in the yield point and viscosity, leading to printability limitations. From among all printable systems, the WBPUU with a solid content of 32 wt% is proposed to be the more suitable ink for a successful printing performance, presenting both adequate printability and good shape fidelity, which leads to the realization of a recognizable and accurate 3D construct and an understanding of its relationship with rheological parameters.

| S-EPMC8232083 | biostudies-literature

Fast-Response Non-Contact Flexible Humidity Sensor Based on Direct-Writing Printing for Respiration Monitoring.

Project description:Respiratory monitoring is crucial for evaluating health status and identifying potential respiratory diseases such as respiratory failure, bronchitis, and pneumonia. Humidity sensors play a significant role in this regard, and efforts are being made to improve their performance. However, achieving ideal sensor parameters such as sensitivity, detection range, and response speed is challenging. In this work, we propose a flexible preparation method for a double-layer humidity sensor using PDMS as a substrate and a GNP/MWCNT composite material as a sensor element. This sensor exhibits high sensitivity (1.4 RH-1), a wide detection range (20-90%), ultra-fast response (0.35 s) and recovery (2.5 s), high repetitiveness (500 cycles), good long-term stability, and excellent flexibility. Due to these advantages, this sensor has potential applications in real-time clinical and home medical care, such as accurate human respiratory monitoring and non-invasive skin humidity monitoring. Hence, this humidity sensor can be a powerful tool to monitor respiratory moisture levels for diagnosing and treating respiratory diseases effectively.

| S-EPMC10452166 | biostudies-literature

Advanced Artificial Muscle for Flexible Material-Based Reconfigurable Soft Robots.

Project description:Flexible material-based soft robots are widely used in various areas. In many situations, the suitable soft robots should be rapidly fabricated to complete the urgent tasks (such as rescue), so the facile fabricating methods of the multifunctional soft robots are still in urgent needs. In this work, the origami structure is employed to design vacuum-powered silicone rubber artificial muscles, which can perform multiple motions, including contraction, bending, twisting, and radial motions. Artificial muscles can be used for rapid reconfiguration of different soft robots, just like the "building bricks". Based on these artificial muscles, four soft robots with different functions, including an omnidirectional quadruped robot, a flexible gripper, a flexible wrist, and a pipe-climbing robot, are reconfigured to complete different tasks. The proposed origami artificial muscles offer a facile and rapid fabricating method of flexible material-based soft robots, and also greatly improve the utilization rate of flexible materials.

| S-EPMC6839643 | biostudies-literature

Traditional Artificial Neural Networks Versus Deep Learning in Optimization of Material Aspects of 3D Printing.

Project description:3D printing of assistive devices requires optimization of material selection, raw materials formulas, and complex printing processes that have to balance a high number of variable but highly correlated variables. The performance of patient-specific 3D printed solutions is still limited by both the increasing number of available materials with different properties (including multi-material printing) and the large number of process features that need to be optimized. The main purpose of this study is to compare the optimization of 3D printing properties toward the maximum tensile force of an exoskeleton sample based on two different approaches: traditional artificial neural networks (ANNs) and a deep learning (DL) approach based on convolutional neural networks (CNNs). Compared with the results from the traditional ANN approach, optimization based on DL decreased the speed of the calculations by up to 1.5 times with the same print quality, improved the quality, decreased the MSE, and a set of printing parameters not previously determined by trial and error was also identified. The above-mentioned results show that DL is an effective tool with significant potential for wide application in the planning and optimization of material properties in the 3D printing process. Further research is needed to apply low-cost but more computationally efficient solutions to multi-tasking and multi-material additive manufacturing.

| S-EPMC8707385 | biostudies-literature

In-Gel Direct Laser Writing for 3D-Designed Hydrogel Composites That Undergo Complex Self-Shaping.

Project description:Self-shaping and actuating materials inspired by biological system have enormous potential for biosensor, microrobotics, and optics. However, the control of 3D-complex microactuation is still challenging due to the difficulty in design of nonuniform internal stress of micro/nanostructures. Here, we develop in-gel direct laser writing (in-gel DLW) procedure offering a high resolution inscription whereby the two materials, resin and hydrogel, are interpenetrated on a scale smaller than the wavelength of the light. The 3D position and mechanical properties of the inscribed structures could be tailored to a resolution better than 100 nm over a wide density range. These provide an unparalleled means of inscribing a freely suspended microstructures of a second material like a skeleton into the hydrogel body and also to direct isotropic volume changes to bending and distortion motions. In the combination with a thermosensitive hydrogel rather small temperature variations could actuate large amplitude motions. This generates complex modes of motion through the rational engineering of the stresses present in the multicomponent material. More sophisticated folding design would realize a multiple, programmable actuation of soft materials. This method inspired by biological system may offer the possibility for functional soft materials capable of biomimetic actuation and photonic crystal application.

| S-EPMC5770688 | biostudies-other

High-performance polyvinyl chloride gel artificial muscle actuator with graphene oxide and plasticizer.

Project description:A transparent and electroactive plasticized polyvinyl chloride (PVC) gel was investigated to use as a soft actuator for artificial muscle applications. PVC gels were prepared with varying plasticizer (dibutyl adipate, DBA) content. The prepared PVC gels were characterized using Fourier-transform infrared spectroscopy, thermogravimetric analysis, and dynamic mechanical analysis. The DBA content in the PVC gel was shown to have an inverse relationship with both the storage and loss modulus. The electromechanical performance of PVC gels was demonstrated for both single-layer and stacked multi-layer actuators. When voltage was applied to a single-layer actuator and then increased, the maximum displacement of PVC gels (for PVC/DBA ratios of 1:4, 1:6, and 1:8) was increased from 105.19, 123.67, and 135.55?µm (at 0.5?kV) to 140.93, 157.13, and 172.94?µm (at 1.0?kV) to 145.03, 191.34, and 212.84?µm (at 1.5?kV), respectively. The effects of graphene oxide (GO) addition in the PVC gel were also investigated. The inclusion of GO (0.1 wt.%) provided an approximate 20% enhancement of displacement and 41% increase in force production, and a 36% increase in power output for the PVC/GO gel over traditional plasticizer only PVC gel. The proposed PVC/GO gel actuator may have promising applications in artificial muscle, small mechanical devices, optics, and various opto-electro-mechanical devices due to its low-profile, transparency, and electrical response characteristics.

| S-EPMC6609716 | biostudies-literature

High-Performance PVC Gel for Adaptive Micro-Lenses with Variable Focal Length.

Project description:This paper presents a bio-inspired adaptive micro-lens with electrically tunable focus made of non-ionic high-molecular-weight polyvinyl chloride (PVC) gel. The optical device mimics the design of the crystalline lens and ciliary muscle of the human eye. It consists of a plano-convex PVC gel micro-lens on Indium Tin Oxide (ITO) glass, confined with an annular electrode operating as an artificial ciliary muscle. Upon electrical activation, the electroactive adhesive force of the PVC gel is exerted on the annular anode electrode, which reduces the sagittal height of the plano-convex PVC gel lens, resulting in focal length variation of the micro-lens. The focal length increases from 3.8?mm to 22.3?mm as the applied field is varied from 200?V/mm to 800?V/mm, comparable to that of the human lens. The device combines excellent optical characteristics with structural simplicity, fast response speed, silent operation, and low power consumption. The results show the PVC gel micro-lens is expected to open up new perspectives on practical tunable optics.

| S-EPMC5437028 | biostudies-literature

Direct sound printing.

Project description:Photo- and thermo-activated reactions are dominant in Additive Manufacturing (AM) processes for polymerization or melting/deposition of polymers. However, ultrasound activated sonochemical reactions present a unique way to generate hotspots in cavitation bubbles with extraordinary high temperature and pressure along with high heating and cooling rates which are out of reach for the current AM technologies. Here, we demonstrate 3D printing of structures using acoustic cavitation produced directly by focused ultrasound which creates sonochemical reactions in highly localized cavitation regions. Complex geometries with zero to varying porosities and 280 μm feature size are printed by our method, Direct Sound Printing (DSP), in a heat curing thermoset, Poly(dimethylsiloxane) that cannot be printed directly so far by any method. Sonochemiluminescnce, high speed imaging and process characterization experiments of DSP and potential applications such as remote distance printing are presented. Our method establishes an alternative route in AM using ultrasound as the energy source.

| S-EPMC8986813 | biostudies-literature

Direct foam writing in microgravity.

Project description:Herein we report 2D printing in microgravity of aqueous-based foams containing metal oxide nanoparticles. Such hierarchical foams have potential space applications, for example for in situ habitat repair work, or for UV shielding. Foam line patterns of a TiO2-containing foam have been printed onto glass substrates via Direct Foam Writing (DFW) under microgravity conditions through a parabolic aircraft flight. Initial characterization of the foam properties (printed foam line width, bubble size, etc.) are presented. It has been found that gravity plays a significant role in the process of direct foam writing. The foam spread less over the substrate when deposited in microgravity as compared to Earth gravity. This had a direct impact on the cross-sectional area and surface roughness of the printed lines. Additionally, the contact angle of deionized water on a film exposed to microgravity was higher than that of a film not exposed to microgravity, due to the increased surface roughness of films exposed to microgravity.

| S-EPMC8692601 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data