Dataset Information

Ankle joint rotation and exerted moment during plantarflexion dependents on measuring- and fixation method.

ABSTRACT: We examined the effect of ankle joint fixation vs increased foot pressure (aiming to reduce dynamometer-subject elasticity (DSE)) on the exerted moment during plantarflexion contraction. We also examined the joint rotation in dependence of the measuring site (forefoot, rearfoot) and the foot condition (fixed, free). We hypothesized higher exerted moments due to reduced DSE compared to fixed condition and an effect of fixation on the joint rotation in dependence of the measuring site. Fourteen healthy individuals (28.7±6.9y) completed in randomized order maximal isometric plantarflexions in four different positions (0-3-6-9 cm) and two ankle joint conditions (fixed-free). Kinematics of the rear- and forefoot were obtained synchronously. We found higher moment in the fixed compared to the free condition at all positions. The maximum moment in the fixed condition did not differ at any position. At the fixed condition, the forefoot rotation did not differ at any position (~5°) while at free condition we observed a significant rotation reduction (form ~12 to ~5°). The rearfoot rotation did not differ between conditions at any position while a significant joint angle reduction was observed (~10 to ~6° and ~12 to ~6°; fixed-free respectively). The results indicate that with appropriate foot fixation the maximum moment can be achieved irrespective of the position. With the foot secured, the measuring site influences the rotational outcome. We suggest that for a minimization of the joint rotation a fixation and the forefoot-measuring site should be preferred. Additionally, for unconstrained foot kinematic observations both measuring sites can be obtained.

SUBMITTER: Stafilidis S

PROVIDER: S-EPMC8407569 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Similar Datasets

Project description:BackgroundImproving the prediction ability of a human-machine interface (HMI) is critical to accomplish a bio-inspired or model-based control strategy for rehabilitation interventions, which are of increased interest to assist limb function post neurological injuries. A fundamental role of the HMI is to accurately predict human intent by mapping signals from a mechanical sensor or surface electromyography (sEMG) sensor. These sensors are limited to measuring the resulting limb force or movement or the neural signal evoking the force. As the intermediate mapping in the HMI also depends on muscle contractility, a motivation exists to include architectural features of the muscle as surrogates of dynamic muscle movement, thus further improving the HMI's prediction accuracy.ObjectiveThe purpose of this study is to investigate a non-invasive sEMG and ultrasound (US) imaging-driven Hill-type neuromuscular model (HNM) for net ankle joint plantarflexion moment prediction. We hypothesize that the fusion of signals from sEMG and US imaging results in a more accurate net plantarflexion moment prediction than sole sEMG or US imaging.MethodsTen young non-disabled participants walked on a treadmill at speeds of 0.50, 0.75, 1.00, 1.25, and 1.50 m/s. The proposed HNM consists of two muscle-tendon units. The muscle activation for each unit was calculated as a weighted summation of the normalized sEMG signal and normalized muscle thickness signal from US imaging. The HNM calibration was performed under both single-speed mode and inter-speed mode, and then the calibrated HNM was validated across all walking speeds.ResultsOn average, the normalized moment prediction root mean square error was reduced by 14.58 % ([Formula: see text]) and 36.79 % ([Formula: see text]) with the proposed HNM when compared to sEMG-driven and US imaging-driven HNMs, respectively. Also, the calibrated models with data from the inter-speed mode were more robust than those from single-speed modes for the moment prediction.ConclusionsThe proposed sEMG-US imaging-driven HNM can significantly improve the net plantarflexion moment prediction accuracy across multiple walking speeds. The findings imply that the proposed HNM can be potentially used in bio-inspired control strategies for rehabilitative devices due to its superior prediction.

Project description:BackgroundAnkle fractures are one of the most common orthopedic injuries, and although most patients have a satisfactory outcome following operative fixation, there are patients that have persistent pain despite anatomic reduction. Intra-articular injuries have been suggested as one potential cause of these suboptimal outcomes. Our study assesses the clinical impact of performing an ankle arthroscopy during ankle fracture open reduction and internal fixation (ORIF).MethodsThis was a retrospective chart review of all patients who underwent operative fixation of a bimalleolar or trimalleolar ankle fracture at our institution from 2014 through 2018. We extracted all demographic data, fracture pattern, operative procedures performed, tourniquet times, arthroscopic findings and any arthroscopic interventions. We then conducted a phone and e-mail survey. Our study included 213 total patients (142 traditional ORIF, 71 ORIF plus arthroscopy) with an average age of 40 years. The average follow-up was 32.4 months with a survey follow-up rate of 50.7% (110/213).ResultsThe average tourniquet time for the arthroscopy cohort was 10 minutes longer (89 minutes vs 79 minutes). During the arthroscopy, there was a 28% (20/71) rate of full-thickness osteochondral lesions, 33% (24/71) rate of loose bodies, and a 49% (35/71) rate of partial-thickness cartilage injury. The mean Patient Reported Outcome Information System (PROMIS) physical function score among Weber B fibula fractures was 45.8 and 42.3 in the arthroscopy and nonarthroscopy groups, respectively (P = .012). In addition, the patient satisfaction rate in Weber B fibula fractures was higher in those patients who underwent arthroscopy compared with ORIF alone (93% vs 75%, P = .05). Patients who had a tibiotalar joint dislocation at the time of the ankle fracture had a significantly higher PROMIS physical function score (46.6 vs 40.2, P = .005) when their surgery included arthroscopy.ConclusionAnkle arthroscopy at the time of ORIF led to statistically significant improvements in patient-reported outcomes for Weber B fibula fractures and ankle dislocations. There was no increase in complication rates and the arthroscopy took 10 minutes longer on average.Level of evidenceLevel III, retrospective cohort study.

Project description:BackgroundThe Ponseti method is the gold standard for clubfoot treatment. However, relapse and residual gait deviations are common, and follow-up until 7 years of age is recommended. We evaluated the reliability of the foot drawing method, a new instrument for the follow-up of clubfoot. The method uses drawings of the foot in the neutral position and external rotation to measure foot length and outward rotation.MethodsNineteen children aged 2.5-7 years who were treated with the Ponseti method for congenital clubfoot were included. Two raters made the drawings twice (D1 and D2). Each rater measured foot length, foot rotation, and foot-tibial rotation independently (D1). Later, the raters repeated the measurements (D2). Interrater reliability was assessed using the D1 from each rater. Intrarater reliability was assessed using the measurements from each rater's D1 and D2. Bland-Altman plots were used to visualize the limits of agreement (LoA). The mean, 95% confidence interval, and one standard deviation of the differences in all measurements were calculated.ResultsThe mean differences between and within raters were: foot length < 1 mm, foot rotation < 1°, and foot-tibia rotation < 2°, which indicated no systematic differences. The LoA for foot length were: 4.5 mm and 5.9 mm between raters for D1, - 4.8 mm and 5.9 mm for rater 1 (D1-D2), and - 5.1 mm and 5 mm for rater 2 (D1-D2). The LoA for foot rotation: were - 12° and 10.6° between raters (D1), - 8.4° and 6.6° for rater 1 (D1-D2), and - 14° and 14.1° for rater 2 (D1-D2). The LoA for foot-tibia rotation were: - 17.8° and 14.3° between raters (D1), - 12° and 12.2° for rater 1 (D1-D2), and - 12.7° and 13.6° for rater 2 (D1- D2).ConclusionsThe absence of systematic differences between and within raters, and LoA observed indicate that the foot drawing method is applicable in clinical practice and research. However, the results of the foot and foot-tibia rotation analyses imply that caution is needed when interpreting changes in foot rotation in feet with higher degrees of rotation.

Dataset Information

Ankle joint rotation and exerted moment during plantarflexion dependents on measuring- and fixation method.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets