Ultra-thin self-healing vitrimer coatings for durable hydrophobicity.
Ontology highlight
ABSTRACT:
SUBMITTER: Ma J
PROVIDER: S-EPMC8410847 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Vitrimer-based liquid-crystalline elastomers (LCEs) exhibit great advantages over the traditional LCEs due to their inherent processability to realize monodomain alignment and construction of LCE actuators with complex 3D structures in a robust way. Though exciting progress has been made, how to achieve a proper balance between processability and actuation durability/stability remains a big challenge. Here, we report a strategy to mitigate the conflict between processability and actuation stability by reducing the catalyst content in an epoxy/acid LCE vitrimer system. With a relatively low catalyst content (0.25 mol% to carboxyl group), monodomain LCEs with large actuation strain (∼95%) and excellent actuation stability (the actuation strain is completely maintained after 100 heating-cooling cycles and more than 90% of the initial strain is retained even after 500 cycles) could be easily prepared. Moreover, the monodomain LCEs can still be readily realigned or directly reconfigured into complex reversible 3D actuators.
| S-EPMC6427948 | biostudies-literature
Project description:A key technology to ensure the safety and accuracy of autonomous driving for future transportation is the cleanliness of the sensor surfaces for accurate signal reading. This study focuses on hydrophobic coatings with self-cleaning performances and UV durability, their possible degradation mechanism of static water contact angle (sWCA), and the effect of the hydrophobic surface on camera image quality. The UV-durable hydrophobic coatings are applied by a spray process followed by a thermal curing. The UV-durable hydrophobic coatings are evaluated on a vision camera under lab-simulated weathering conditions such as rain, mud, fog, and bugs, on samples as-prepared and after various hours of Weather-Ometer® weathering. The results indicate that the sWCA degradation of the UV-durable hydrophobic coatings during accelerated weathering is corresponding to the loss of fluorine (F) atomic percentage in the coatings, and the vision camera imaging quality improves significantly with the UV-durable hydrophobic coatings in comparison to an uncoated surface. The self-cleaning performances of the UV-durable hydrophobic coatings, as measured by two metrics using signal-to-noise ratio and modulation transfer function 50 loss (MTF50loss), linearly correlate with sWCA of the coatings. The UV-durable hydrophobic coatings on the sensor surface will significantly benefit autonomous driving specifically for accurate signal reading under inclement weather.
| S-EPMC10997611 | biostudies-literature
Project description:Low-viscosity oils could potentially act as self-healing barrier coatings because they can readily flow and reconnect to heal minor damage. For the same reason, however, they typically do not form stable coatings on metal surfaces. Increasing viscosity helps to stabilize the oil coating, but it also slows down the healing process. Here, we report a strategy for creating highly stable oil coatings on metal surfaces without sacrificing their remarkable self-healing properties. Low-viscosity oil films can be immobilized on metal surfaces using lightweight microcapsules as thickeners, which form a dynamic network to prevent the creep of the coating. When the coating is scratched, oil around the opening can rapidly flow to cover the exposed area, reconnecting the particle network. Use of these coatings as anticorrosion barriers is demonstrated. The coatings can be easily applied on metal surfaces, including those with complex geometries, both in air or under water, and remain stable even in turbulent water. They can protect metal in corrosive environments for extended periods of time and can self-heal repeatedly when scratched at the same spot. Such a strategy may offer effective mitigation of the dangerous localized corrosion aggravated by minor imperfections or damage in protective coatings, which are typically hard to prevent or detect, but can drastically degrade metal properties.
| S-EPMC6750121 | biostudies-literature
Project description:This paper proposes a novel multifunctional ultra-thin membrane based on a Polyborosiloxane-based gel with stimuli-responsive sound absorption and sound transmission loss (STL) and characterised by excellent self-healing properties. This adaptive behaviour is the result of a dynamically activated phase transition in the membrane's polymeric network which is given by the interaction with the travelling sound pressure wave. The presence and the extent of such phase transition in the material was investigated via oscillatory rheological measurements showing the possibility to control the dynamic response by modifying the Boron content within the polymer. Acoustic analyses conducted at different stimuli responses showed high and dynamic absorption (95%) at the absorption coefficient peaks and an adaptive shift to lower frequencies while sound amplitudes were increased. An average STL up to 27 dB in the frequency range between 500 to 1000 Hz was observed and an increased STL above 2 dB was measured as the excitation amplitude was increased. Results demonstrated that the new membrane can be used to develop deep subwavelength absorbers with unique properties (1/54 wavelength in absorption and 1/618 in STL) able to tune their performance in response to an external stimulus while autonomously regaining their properties in case of damage thanks to their self-healing ability.
| S-EPMC9588055 | biostudies-literature
Project description:A versatile, convenient, and cost-effective method that can be used for grafting anti-icing materials onto different surfaces is highly desirable. Based on mussel-inspired chemistry, the anti-icing coating with extremely low ice adhesion is enabled by constructing a self-sustainable lubricating layer, achieved via modifying solid substrates with a highly hydrophilic conjugate of poly(acrylic acid)-dopamine. Both unfreezable and freezable water remain liquidlike at subzero conditions and synergistically fulfill the role of lubrication for reducing the ice adhesion. The anti-icing coatings show excellent stability in harsh environments and durability after the cross-linking. More importantly, this coating can be applied to various substrates and is of great promise for practical applications.
| S-EPMC6640938 | biostudies-literature
Project description:Protein adsorption on solid surfaces provides either beneficial or adverse outcomes, depending on the application. Therefore, the desire to predict, control, and regulate protein adsorption on different surfaces is a major concern in the field of biomaterials. The most widely used surface modification approach to prevent or limit protein adsorption is based on the use of poly (ethylene oxide) (PEO). On the other hand, the amount of protein adsorbed on poly(2-(dimethylamine)ethyl methacrylate) (PDMAEMA) coatings can be regulated by the pH and ionic strength of the medium. In this work, ultra-thin PEO/PDMAEMA coatings were designed from solutions with different ratios of PEO to PDMAEMA, and different molar masses of PEO, to reversibly adsorb and desorb human serum albumin (HSA), human fibrinogen (Fb), lysozyme (Lys), and avidine (Av), four very different proteins in terms of size, shape, and isoelectric points. X-ray photoelectron spectroscopy (XPS), quartz crystal microbalance (QCM), and atomic force microscopy (AFM) were used to characterize the mixed polymer coatings, revealing the presence of both polymers in the layers, in variable proportions according to the chosen parameters. Protein adsorption at pH 7.4 and salt concentrations of 10-3 M was monitored by QCM. Lys and Av did not adsorb on the homo-coatings and the mixed coatings. The amount of HSA and Fb adsorbed decreased with increasing the PEO ratio or its molar mass in a grafting solution. It was demonstrated that HSA and Fb, which were adsorbed at pH 7.4 and at an ionic strength of 10-3 M, can be fully desorbed by rinsing with a sodium chloride solution at pH 9.0 and ionic strength 0.15 M from the mixed PEO5/PDMAEMA coatings with PEO/PDMAEMA mass ratios of 70/30, and 50/50, respectively. The results demonstrate that mixed PEO/PDMAEMA coatings allow protein adsorption to be finely tuned on solid surfaces.
| S-EPMC7183053 | biostudies-literature
Project description:The emission of electrons from the surface of a material into vacuum depends strongly on the material's work function, temperature, and the intensity of electric field. The combined effects of these give rise to a multitude of related phenomena, including Fowler-Nordheim tunneling and Schottky emission, which, in turn, enable several families of devices, ranging from vacuum tubes, to Schottky diodes, and thermionic energy converters. More recently, nanomembrane-based detectors have found applications in high-resolution mass spectrometry measurements in proteomics. Progress in all the aforementioned applications critically depends on discovering materials with effective low surface work functions. We show that a few atomic layer deposition (ALD) cycles of zinc oxide onto suspended diamond nanomembranes, strongly reduces the threshold voltage for the onset of electron field emission which is captured by resonant tunneling from the ZnO layer. Solving the Schroedinger equation, we obtain an electrical field- and thickness-dependent population of the lowest few subbands in the thin ZnO layer, which results in a minimum in the threshold voltage at a thickness of 1.08 nm being in agreement with the experimentally determined value. We conclude that resonant tunneling enables cost-effective ALD coatings that lower the effective work function and enhance field emission from the device.
| S-EPMC6497713 | biostudies-literature
Project description:Plant oil-based vitrimer is an innovative and sustainable polymer with wide-ranging potential applications in the field of advanced materials. However, its restricted application is caused by the poor mechanical properties and the need for catalysts during preparation. Using renewable cardanol as the raw material, epoxy cardanol glycidyl ether (ECGE) with an end epoxide group was obtained by the clicking reaction and epoxidation reaction. After the application of citric acid (CA), ECGE was successfully cured, resulting in the production of fully biobased ECGE-CA vitrimers. This material does not require a catalyst, possesses self-healing properties, and exhibits high mechanical strength. On account of the introduction of hydroxyl groups in citric acid, plenty of hydrogen bonds are formed, allowing the topological network rearrangement of the material in the absence of a catalyst. Recyclable adhesives and repairable materials, vitrimer polymers have good shape memory, self-healing, and recyclability since of their dynamic ester and hydroxyl bonds.
| S-EPMC11360019 | biostudies-literature
Project description:Liquid-repellent coatings with rapid self-healing and strong substrate adhesion have tremendous potential for industrial applications, but their formulation is challenging. We exploit synergistic chemistry between donor-acceptor self-assembly units of polyurethane and hydrophobic metal-organic framework (MOF) nanoparticles to overcome this challenge. The nanocomposite features a nanohierarchical morphology with excellent liquid repellence. Using polyurethane as a base polymer, the incorporated donor-acceptor self-assembly enables high strength, excellent self-healing property, and strong adhesion strength on multiple substrates. The interaction mechanism of donor-acceptor self-assembly was revealed via density functional theory and infrared spectroscopy. The superhydrophobicity of polyurethane was achieved by introducing alkyl-functionalized MOF nanoparticles and post-application silanization. The combination of the self-healing polymer and nanohierarchical MOF nanoparticles results in self-cleaning capability, resistance to tape peel and high-speed liquid jet impacts, recoverable liquid repellence over a self-healed notch, and low ice adhesion up to 50 icing/deicing cycles. By exploiting the porosity of MOF nanoparticles in our nanocomposites, fluorine-free, slippery liquid-infused porous surfaces with stable, low ice adhesion strengths were also achieved by infusing silicone oil into the coatings.
| S-EPMC9940105 | biostudies-literature
Project description:Inspired by the repair of DNA through efficient reformation of hydrogen bonds (H-bonds), herein we report a facile one-step approach to construction of self-healing antifogging thin films on the basis of partly cross-linked poly(vinyl alcohol)(PVA) and poly(acrylic acid)(PAA). By designing the molar ratio of hydroxyl groups to carboxyl groups, the cross-linked polymer thin films maintain abundant free hydroxyl groups to present excellent antifogging property, which is derived from the hydrophilicity and hygroscopicity of the thin films. The thin films showed smart intrinsic self-healing characteristics towards wounds caused by external forces, which is attributed to sufficient free hydroxyl groups at the scratched interfaces to reform H-bonds across the interfaces and a sufficient chain mobility that is indispensable for chain diffusion across the interfaces and hydroxyl groups association to form H-bonds. No synthetic surfaces reported so far possess all the unique characteristics of the polymer thin films: intrinsic self-healing, long-term antifogging, excellent mechanical property, high transmittance and large-scale feasibility.
| S-EPMC4363865 | biostudies-literature