Browse
Submit Data
Databases
API
Help

Dataset Information

28 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Fabrication of Carbon-Alumina Composites via Catalytic Pyrolysis of Pine Sawdust on Aluminum Dross for Cr(VI) Removal.

ABSTRACT: Carbon-alumina composites are prepared for the efficient removal of Cr(VI) from wastewater. Pristine and acid-treated alumina dross (AD and AAD) are copyrolyzed with pine sawdust to form the respective composites, ADPC and AADPC. Excellent absorption properties with Cr(VI) removal efficiency of 95.08% are demonstrated at 60 °C for an initial concentration of 6 μg/mL. The composites combine the merits of char, which provides a high surface-to-volume ratio with abundant functional groups on the surface, and alumina, which provides metal ions for coprecipitation. Carbon structures of pine, char, and composite were analyzed semiquantitatively using ¹³C NMR by a curve-fitting method. Cr(VI) adsorption is accurately described with chemisorption by the Langmuir isotherm model and a pseudo-second-order kinetic model. The results show that AADPC has more alcohol hydroxyl groups substituted to glucosyl units in amorphous cellulose assigned to the peak at 80 ppm and hemicellulose assigned to peaks at 97 and 101 ppm. Also, it has more phenolic groups in lignin distributed at syringyl units assigned to peaks at 129 and 146 ppm. These oxygen-containing functional groups have a significant influence on Cr(VI) adsorption and reduction to Cr(III) governed by the mechanisms of diffusion, adsorption, complexation, reduction, and coprecipitation. The results of this work provide a new direction for the reuse of biomass and industrial solid wastes to fabricate higher value-added products, i.e., adsorption materials for Cr(VI) removal and stabilization.

SUBMITTER: Liu P

PROVIDER: S-EPMC8412942 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Facile Fabrication of ZnMgAl/LDH/Algae Composites as a Potential Adsorbent for Cr(VI) Ions from Water: Fabrication and Equilibrium Studies.

Project description:In order to improve the adsorption capacity of natural layered double hydroxyl (LDH) materials, the natural organic sources such as algae containing hydroxyl groups, amino groups, peptide connections, and alginate structures were used to improve LDH for the preparation of ZnMgAl LDH-algae composites (LDH-Ax). The structure of prepared composites was established and characterized via various techniques such as scanning electron microscopy, X-ray diffraction, and Fourier transform infrared spectroscopy. The LDH-A2 sample displayed the highest efficiency for Cr(VI) removal, which reached to 99% at the optimum conditions. The prepared composite LDH-A2 showed high stability and reusability (91.7%) after five cycles. The kinetic studies revealed that the Cr uptake by LDH-A1 is described as pseudo-first order, while the case of LDH-A2 is described as pseudo-second order. This study reported that the easily synthesized LDH-Ax has an interesting environmental approval process to eliminate Cr ions from aqueous media quickly and effectively.

| S-EPMC7727017 | biostudies-literature

Adsorption characteristics and mechanism of p-nitrophenol by pine sawdust biochar samples produced at different pyrolysis temperatures.

Project description:Biochar is becoming a low-cost substitute of activated carbon for the removal of multiple contaminants. In this study, five biochar samples derived from pine sawdust were produced at different pyrolysis temperatures (300?°C-700?°C) and used adsorbents to remove p-nitrophenol from water. Results indicate that, as the pyrolysis temperature increases, the surface structure of biochar grows in complexity, biochar's aromaticity and number of functional group decrease, and this material's polarity increases. Biochar's physiochemical characteristics and dosage, as well as solution's pH and environmental temperature significantly influence the p-nitrophenol adsorption behavior of biochar. p-nitrophenol adsorption onto biochar proved to be an endothermic and spontaneous process; furthermore, a greater energy exchange was observed to take place when biochar samples prepared at high temperatures were utilized. The adsorption mechanism includes physical adsorption and chemisorption, whereas its rate is mainly affected by intra-particle diffusion. Notably, in biochar samples prepared at low temperature, adsorption is mainly driven by electrostatic interactions, whereas, in their high-temperature counterparts, p-nitrophenol adsorption is driven also by hydrogen bonding and ?-? interactions involving functional groups on the biochar surface.

| S-EPMC7083892 | biostudies-literature

Fabrication of chitosan/magnetite-graphene oxide composites as a novel bioadsorbent for adsorption and detoxification of Cr(VI) from aqueous solution.

Project description:By utilizing the synergistic effect of chitosan (CS), magnetite (Fe3O4) particles, and graphene oxide (GO), a series of efficient and eco-friendly chitosan/magnetite-graphene oxide (CS/MGO) composites were fabricated through a facile chemical route. First, Fe3O4 particles were chemically deposited on the surface of GO to fabricate MGO hybrid. Then, chitosan was attached on MGO sheets, assembling to CS/MGO composites. According to the results of characterization, the covalent Fe-O-C bonds, electrostatic attraction, and hydrogen bonding between GO, Fe3O4, and chitosan ensure excellent structural stability and physico-chemical properties. The adsorption of Cr(VI) onto CS/MGO composites was also carried out under various conditions (content of CS, pH, initial concentration, contact time, and temperature). The CS/MGO composites possess high removal capacity for Cr(VI) from aqueous solution. Moreover, results also suggested that the CS/MGO composites had a strong reducing action for Cr(VI). When adsorption occurred, Cr(VI) and Cr(III) were simultaneously removed by CS/MGO composites. In addition, CS/MGO composites could retain good Cr(VI) removal efficiency after reuse over five cycles. CS/MGO composites are expected to have potential applications as easily regenerative bioadsorbents for Cr(VI) polluted water cleanup.

| S-EPMC6193940 | biostudies-literature

Adsorption mechanism of Cr(VI) onto GO/PAMAMs composites.

Project description:Graphene oxide/polyamidoamine dendrimers (GO/PAMAMs) composites were used to remove Cr(VI) from simulated effluents, the adsorption kinetics and thermodynamics of Cr(VI) onto GO/PAMAMs were systematically investigated. The results showed that the optimum pH value was 2.5, the removal percentage reached 90.7% for 30 mg/L of Cr(VI) within 120 min. The adsorption process was well described by pseudo-second-order kinetic model. The maximum adsorption capacities of Cr(VI) onto GO/PAMAMs were found to be 131.58, 183.82 and 211.42 mg/g at 293.15, 303.15 and 313.15 K, respectively, which were calculated from the Langmuir model equation. The adsorption thermodynamic parameters indicate that the adsorption of Cr(VI) onto GO/PAMAMs is a spontaneous endothermic process. The XPS analysis reveals the adsorption and removal mechanism of Cr(VI) on GO/PAMAMs that first the Cr(VI) binds to the protonated amine of GO/PAMAMs, then Cr(VI) be reduced to Cr(III) with the assistance of π-electrons on the carbocyclic six-membered ring of GO in GO/PAMAMs, and then Cr(III) was released into solution under the electrostatic repulsion between the Cr(III) and the protonated amine groups.

| S-EPMC6403246 | biostudies-other

Nonisothermal Crystallization of Surface-Treated Alumina and Aluminum Nitride-Filled Polylactic Acid Hybrid Composites.

Project description:This work investigates the nonisothermal crystallization and melting behavior of polylactic acid (PLA), filled with treated and untreated alumina and nano-aluminum nitride hybrid composites. Analysis by attenuated total reflectance Fourier transform infrared spectroscopy revealed that the treated fillers and the PLA matrix developed a good interaction. The crystallization and melting behaviors of the PLA hybrid composites were investigated using differential scanning calorimetry showed that the degree of crystallinity increased with the addition of hybrid fillers. Unlike the untreated PLA composites, the complete crystallization of the treated PLA hybrid composites hindered cold crystallization during the second heating cycle. The crystallization kinetics studied using the Avrami model indicated that the crystallization rate of PLA was affected by the inclusion of filler particles. X-ray diffraction analysis confirmed crystal formation with the incorporation of filler particles. The inclusion of nano-aluminum nitride (AlN) and the increase in the crystallinity led to an improvement of the storage modulus.

| S-EPMC6630763 | biostudies-literature

Removal of aqueous Cr(VI) by magnetic biochar derived from bagasse.

Project description:We prepared a novel adsorbent functionalized by bagasse magnetic biochar (BMBC). To study the removal behaviors and mechanisms of Cr(VI) by BMBC, batch adsorption experiments were conducted by modifying variables, such as pH, adsorption time, BMBC dosages, initial Cr concentration, co-existing ions, and ionic strength, and characterizing BMBC before and after Cr(VI) adsorption. BMBC was primarily composed of Fe2O3 and Fe3O4 on bagasse boichar with an amorphous structure. The specific surface area of BMBC was 81.94 m2 g-1, and the pHpzc of BMBC was 6.2. The fabricated BMBC showed high adsorption performance of Cr(VI) in aqueous solution. The maximum Cr(VI) adsorption capacity of BMBC was 29.08 mg g-1 at 25 ºC, which was much higher than that of conventional biochar sorbents. The adsorption process followed pseudo-second-order kinetics and could be explained by the involvement of the Langmuir isotherm in monolayer adsorption. The crystalline structure of Fe3O4 in the BMBC changed slightly during the adsorption process; Fe3O4 improved the adsorption of Cr(VI) on BMB. The desorption capacity of Cr(VI) was 8.21 mg g-1 when 0.2 mol L-1 NaOH was used as the desorption solution. After being reused three times, the removal efficiency is still as high as 80.36%.

| S-EPMC7722720 | biostudies-literature

Fabrication of MNPs/rGO/PMMA Composite for the Removal of Hazardous Cr(VI) from Tannery Wastewater through Batch and Continuous Mode Adsorption.

Project description:Herein, we report the synthesis of magnetic nanoparticle (MNP)-reduced graphene oxide (rGO) and polymethylmethacrylate (PMMA) composite (MNPs/rGO/PMMA) as adsorbent via an in situ fabrication strategy and, in turn, the application for adsorptive removal and recovery of Cr(VI) from tannery wastewater. The composite material was characterized via XRD, FTIR and SEM analyses. Under batch mode experiments, the composite achieved maximum adsorption of the Cr(VI) ion (99.53 ± 1.4%, i.e., 1636.49 mg of Cr(VI)/150 mg of adsorbent) at pH 2, adsorbent dose of 150 mg/10 mL of solution and 30 min of contact time. The adsorption process was endothermic, feasible and spontaneous and followed a pseudo-2nd order kinetic model. The Cr ions were completely desorbed (99.32 ± 2%) from the composite using 30 mL of NaOH solution (2M); hence, the composite exhibited high efficiency for five consecutive cycles without prominent loss in activity. The adsorbent was washed with distilled water and diluted HCl (0.1M), then dried under vacuum at 60 °C for reuse. The XRD analysis confirmed the synthesis and incorporation of magnetic iron oxide at 2θ of 30.38°, 35.5°, 43.22° and 57.36°, respectively, and graphene oxide (GO) at 25.5°. The FTIR analysids revealed that the composite retained the configurations of the individual components, whereas the SEM analysis indicated that the magnetic Fe3O4-NPs (MNPs) dispersed on the surface of the PMMA/rGO sheets. To anticipate the behavior of breakthrough, the Thomas and Yoon-Nelson models were applied to fixed-bed column data, which indicated good agreement with the experimental data. This study evaluates useful reference information for designing a cost-effective and easy-to-use adsorbent for the efficient removal of Cr(VI) from wastewater. Therefore, it can be envisioned as an alternative approach for a variety of unexplored industrial-level operations.

| S-EPMC8620348 | biostudies-literature

Polyacrylonitrile/Aminated Polymeric Nanosphere Nanofibers as Efficient Adsorbents for Cr(VI) Removal.

Project description:In this work, polyacrylonitrile/aminated polymeric nanosphere (PAN/APN) nanofibers were prepared by electrospinning of monodispersed aminated polymeric nanospheres (APNs) for removal of Cr(VI) from aqueous solution. Characterization results showed that obtained PAN/APNs possessed nitrogen functionalization. Furthermore, the adsorption application results indicated that PAN/APN nanofibers exhibited a high adsorption capacity of 556 mg/g at 298 K for Cr(VI) removal. The kinetic data showed that the adsorption process fits the pseudo-second order. A thermodynamic study revealed that the adsorption of Cr(VI) was spontaneous and endothermic. The coexisting ions Na+, Ca2+, K+, Cl-, NO3- and PO43- had little influence on Cr(VI) adsorption, while SO42- in solution dramatically decreased the removal performance. In the investigation of the removal mechanism, relative results indicated that the adsorption behavior possibly involved electrostatic adsorption, redox reaction and chelation. PAN/APN nanofibers can detoxify Cr(VI) to Cr(III) and subsequently chelate Cr(III) on its surface. The unique structure and nitrogen functionalization of PAN/APN nanofibers make them novel and prospective candidates in heavy metal removal.

| S-EPMC9611933 | biostudies-literature

High-Efficiency Removal of Cr(VI) from Wastewater by Mg-Loaded Biochars: Adsorption Process and Removal Mechanism.

Project description:Biochars were produced with magnesium chloride as an additive for the sorption of hexavalent chromium dissolved in water using five types of straw (from taro, corn, cassava, Chinese fir, and banana) and one type of shell (Camellia oleifera) as the raw materials. The removal of hexavalent chromium by the six biochars mainly occurred within 60 min and then gradually stabilized. The kinetics of the adsorption process were second order, the Langmuir model was followed, and the adsorption of Cr(VI) by the six biochars was characterized by Langmuir monolayer chemisorption on a heterogeneous surface. Banana straw biochar (BSB) had the best performance, which perhaps benefitted from its special structure and best adsorption effect on Cr(VI), and the theoretical adsorption capacity was calculated as 125.00 mg/g. For the mechanism analysis, Mg-loaded biochars were characterized before and after adsorption by Fourier transform infrared spectroscopy (FTIR), X-ray diffractometry (XRD), and scanning electron microscopy/energy dispersive spectroscopy (SEM-EDS). The adsorption mechanism differed from the adsorption process of conventional magnetic biochar, and biochar interactions with Cr(VI) were controlled mainly by electrostatic attraction, complexation, and functional group bonding. In summary, the six Mg-loaded biochars exhibit great potential advantages in removing Cr(VI) from wastewater and have promising potential for practical use, especially BSB, which shows super-high adsorption performance.

| S-EPMC7078603 | biostudies-literature

Removal of Cr(VI) from Aqueous Solution by Polypyrrole/Hollow Mesoporous Silica Particles.

Project description:Abstract: The removal of Cr(VI) in wastewater plays an important role in human health and environment. In this work, polypyrrole/hollow mesoporous silica particle (PPy/HMSNs) adsorbents have been newly synthesized by in-situ polymerization, which prevent the aggregation of pyrrole in the process of polymerization and exhibit highly selective and powerful adsorption ability for Cr(VI). The adsorption process was in good agreement with the quasi-second-order kinetic model and the Langmuir isotherm model. And the maximum adsorption capacity of Cr(VI) was 322 mg/g at 25 °C. Moreover, the removal rate of Cr(VI) by PPy/HMSNs was ~100% in a number of binary systems, such as Cl-/Cr(VI), NO3-/Cr(VI), SO42-/Cr(VI), Zn2+/Cr(VI), Fe3+/Cr(VI), Sn4+/Cr(VI), and Cu2+/Cr(VI). Thus, the PPy/HMSNs adsorbents have great potential for the removal of Cr(VI) in wastewater.

| S-EPMC7221785 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data