Browse
Submit Data
Databases
API
Help

Dataset Information

14 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Modeling the efficiency of UV at 254 nm for disinfecting the different layers within N95 respirators.

ABSTRACT: The study presented a Monte Carlo simulation of light transport in eight commonly used filtered facepiece respirators (FFRs) to assess the efficacy of UV at 254 nm for the inactivation of SARS-CoV-2. The results showed different fluence rates across the thickness of the eight different FFRs, implying that some FFR models may be more treatable than others, with the following order being (from most to least treatable): models 1512, 9105s, 1805, 9210, 1870+, 8210, 8110s and 1860, for single side illumination. The model predictions did not coincide well with some previously reported experimental data on virus inactivation when applied to FFR surfaces. The simulations predicted that FFRs should experience higher log reductions (>>6-log) than those observed experimentally (often limited to ~5-log). Possible explanations are virus shielding by aggregation or soiling, and a lack of the Monte Carlo simulations considering near-field scattering effects that can create small, localized regions of low UV photon probability on the surface of the fiber material. If the latter is the main cause in limiting practical UV viral decontamination, improvement might be achieved by exposing the FFR to UV isotropically from all directions, such as by varying the UV source to the FFR surface angle during treatment.

SUBMITTER: Abdalrhman AS

PROVIDER: S-EPMC8420338 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Specificity of UV-C LED disinfection efficacy for three N95 respirators.

Project description:The recent surge in the use of UV technology for personal protective equipment (PPE) has created a unique learning opportunity for the UV industry to deepen surface disinfection knowledge, especially on surfaces with complex geometries, such as the N95 filter facepiece respirators (FFR). The work outlined in this study addresses the interconnectedness of independent variables (e.g., UV Fluence, respirator material) that require consideration when assessing UV light efficacy for disinfecting respirators. Through electron microscopy and Fourier-transform infrared (FTIR) spectroscopy, we characterized respirator filter layers and revealed that polymer type affects disinfection efficacy. Specifically, FFR layers made from polypropylene (PP) (hydrophobic in nature) resulted in higher disinfection efficiency than layers composed of polyethylene terephthalate (PET-P) (hygroscopic in nature). An analysis of elastic band materials on the respirators indicated that silicone rubber-based bands achieved higher disinfection efficiency than PET-P bands and have a woven, fabric-like texture. While there is a strong desire to repurpose respirators, through this work we demonstrated that the design of an appropriate UV system is essential and that only respirators meeting specific design criteria may be reasonable for repurposing via UV disinfection.

| S-EPMC8319424 | biostudies-literature

UV 254 nm is more efficient than UV 222 nm in inactivating SARS-CoV-2 present in human saliva.

Project description:Ultraviolet (UV) light can inactivate SARS-CoV-2. However, the practicality of UV light is limited by the carcinogenic potential of mercury vapor-based UV lamps. Recent advances in the development of krypton chlorine (KrCl) excimer lamps hold promise, as these emit a shorter peak wavelength (222 nm), which is highly absorbed by the skin's stratum corneum and can filter out higher wavelengths. In this sense, UV 222 nm irradiation for the inactivation of virus particles in the air and surfaces is a potentially safer option as a germicidal technology. However, these same physical properties make it harder to reach microbes present in complex solutions, such as saliva, a critical source of SARS-CoV-2 transmission. We provide the first evaluation for using a commercial filtered KrCl excimer light source to inactivate SARS-CoV-2 in saliva spread on a surface. A conventional germicidal lamp (UV 254 nm) was also evaluated under the same condition. Using plaque-forming units (PFU) and Median Tissue Culture Infectious Dose (TCID50) per milliliter we found that 99.99% viral clearance (LD99.99) was obtained with 106.3 mJ/cm2 of UV 222 nm for virus in DMEM and 2417 mJ/cm2 for virus in saliva. Additionally, our results showed that the UV 254 nm had a greater capacity to inactivate the virus in both vehicles. Effective (after discounting light absorption) LD99.99 of UV 222 nm on the virus in saliva was ∼30 times higher than the value obtained with virus in saline solution (PBS), we speculated that saliva might be protecting the virus from surface irradiation in ways other than just by intensity attenuation of UV 222 nm. Due to differences between UV 222/254 nm capacities to interact and be absorbed by molecules in complex solutions, a higher dose of 222 nm will be necessary to reduce viral load in surfaces with contaminated saliva.

| S-EPMC9281457 | biostudies-literature

UV<sub>185+254 nm</sub> photolysis of typical thiol collectors: decomposition efficiency, mineralization and formation of sulfur byproducts.

Project description:The decomposition of toxic flotation reagents upon UV185+254 nm irradiation was attractive due to operational simplicity and no dosage of oxidants. In this work, the degradation of typical thiol collectors (potassium ethyl xanthate (PEX), sodium diethyl dithiocarbamate (SDD), O-isopropyl-N-ethyl thionocarbamate (IET) and dianilino dithiophoshoric acid (DDA)) was investigated by UV185+254 nm photolysis. The degradation efficiencies and mineralization extents of collectors were assessed. The formation of CS2 and H2S byproducts was studied, and the mechanisms of collector degradation were proposed under UV185+254 nm irradiation. The PEX, SDD and IET were decomposed with nearly 100% removal upon 75 min of UV185+254 nm irradiation. The decomposition rate constants decreased in the order SDD > PEX > IET ≫ DDA, and the DDA was the refractory collector. After 120 min of UV185+254 nm irradiation, 15-45% of carbon and 25-75% of sulfur of collectors were completely mineralized, and the mineralization extent decreased in the order PEX > SDD > IET > DDA. The percentage of gaseous sulfur (CS2 and H2S) ranged from 0.48 to 4.85% for four collectors, showing the fraction of emitted sulfur byproducts was small. The aqueous CS2 concentration increased in the first 10-20 min, and was decreased to a low level of 0.05-0.1 mg l-1 at 120 min. Two mechanisms, i.e. direct UV254 nm photolysis and indirect oxidation with free radicals, were responsible for collector decomposition in the UV185+254 nm photolysis.

| S-EPMC6549947 | biostudies-literature

Inactivation of aerosolized SARS-CoV-2 by 254 nm UV-C irradiation.

Project description:Surface residing SARS-CoV-2 is efficiently inactivated by UV-C irradiation. This raises the question whether UV-C-based technologies are also suitable to decontaminate SARS-CoV-2- containing aerosols and which doses are needed to achieve inactivation. Here, we designed a test bench to generate aerosolized SARS-CoV-2 and exposed the aerosols to a defined UV-C dose. Our results demonstrate that the exposure of aerosolized SARS-CoV-2 with a low average dose in the order of 0.42-0.51 mJ/cm2 UV-C at 254 nm resulted in more than 99.9% reduction in viral titers. Altogether, UV-C-based decontamination of aerosols seems highly effective to achieve a significant reduction in SARS-CoV-2 infectivity.

| S-EPMC9538331 | biostudies-literature

Three-Dimensional Analysis of Particle Distribution on Filter Layers inside N95 Respirators by Deep Learning.

Project description:The global COVID-19 pandemic has changed many aspects of daily lives. Wearing personal protective equipment, especially respirators (face masks), has become common for both the public and medical professionals, proving to be effective in preventing spread of the virus. Nevertheless, a detailed understanding of respirator filtration-layer internal structures and their physical configurations is lacking. Here, we report three-dimensional (3D) internal analysis of N95 filtration layers via X-ray tomography. Using deep learning methods, we uncover how the distribution and diameters of fibers within these layers directly affect contaminant particle filtration. The average porosity of the filter layers is found to be 89.1%. Contaminants are more efficiently captured by denser fiber regions, with fibers <1.8 ?m in diameter being particularly effective, presumably because of the stronger electric field gradient on smaller diameter fibers. This study provides critical information for further development of N95-type respirators that combine high efficiency with good breathability.

| S-EPMC7737533 | biostudies-literature

UV light-emitting diode (UV-LED) at 265 nm as a potential light source for disinfecting human platelet concentrates.

Project description:The risk of sepsis through bacterial transmission is one of the most serious problems in platelet transfusion. In processing platelet concentrates (PCs), several methods have been put into practice to minimize the risk of bacterial transmission, such as stringent monitoring by cultivation assays and inactivation treatment by photoirradiation with or without chemical agents. As another potential option, we applied a light-emitting diode (LED) with a peak emission wavelength of 265 nm, which has been shown to be effective for water, to disinfect PCs. In a bench-scale UV-LED exposure setup, a 10-min irradiation, corresponding to an average fluence of 9.2 mJ/cm2, resulted in >2.0 log, 1.0 log, and 0.6 log inactivation (mean, n = 6) of Escherichia coli, Staphylococcus aureus, and Bacillus cereus, respectively, in non-diluted plasma PCs. After a 30-min exposure, platelet counts decreased slightly (18 ± 7%: mean ± SD, n = 7); however, platelet surface expressions of CD42b, CD61, CD62P, and PAC-1 binding did not change significantly (P>0.005), and agonist-induced aggregation and adhesion/aggregation under flow conditions were well maintained. Our findings indicated that the 265 nm UV-LED has high potential as a novel disinfection method to ensure the microbial safety of platelet transfusion.

| S-EPMC8136854 | biostudies-literature

Improvement in Fitted Filtration Efficiency of N95 Respirators With Escalating Instruction of the Wearer.

Project description:IntroductionFitted filtration performance of an N95 respirator may benefit from differing levels of instructions.MethodsUsing a modified Occupational Safety and Health Administration fit test protocol, we measured fitted filtration efficiency for an N95 respirator in 21 screened, healthy participants given 4 levels of escalating instruction: (1) uninstructed (baseline), (2) written/pictorial manufacturer instructions, (3) step-by-step video demonstration, and (4) staff instruction (visual inspection of respirator fit and verbal suggestions to adjust when applicable).ResultsBaseline fitted filtration efficiency was not significantly different between participants with or without previous experience of N95 use. Clear improvements in fitted filtration efficiency were observed progressing from baseline (average=86.1%) to manufacturer paper instructions (93.3%), video instructions (97.5%), and post staff intervention (98.3%). Baseline fitted filtration efficiency values were significantly lower than those after video instruction (p<0.037) and staff intervention (p<0.033) sessions.ConclusionsBeyond uninstructed wear or provision of manufacturer instructions, efforts to train and instruct users in proper respirator fit principles with visual feedback are likely to yield benefits to public health outcomes in reducing respiratory exposure during air quality emergencies such as airborne viral outbreaks and wildland fires.

| S-EPMC9628765 | biostudies-literature

Mapping of UV-C dose and SARS-CoV-2 viral inactivation across N95 respirators during decontamination.

Project description:During public health crises like the COVID-19 pandemic, ultraviolet-C (UV-C) decontamination of N95 respirators for emergency reuse has been implemented to mitigate shortages. Pathogen photoinactivation efficacy depends critically on UV-C dose, which is distance- and angle-dependent and thus varies substantially across N95 surfaces within a decontamination system. Due to nonuniform and system-dependent UV-C dose distributions, characterizing UV-C dose and resulting pathogen inactivation with sufficient spatial resolution on-N95 is key to designing and validating UV-C decontamination protocols. However, robust quantification of UV-C dose across N95 facepieces presents challenges, as few UV-C measurement tools have sufficient (1) small, flexible form factor, and (2) angular response. To address this gap, we combine optical modeling and quantitative photochromic indicator (PCI) dosimetry with viral inactivation assays to generate high-resolution maps of "on-N95" UV-C dose and concomitant SARS-CoV-2 viral inactivation across N95 facepieces within a commercial decontamination chamber. Using modeling to rapidly identify on-N95 locations of interest, in-situ measurements report a 17.4 ± 5.0-fold dose difference across N95 facepieces in the chamber, yielding 2.9 ± 0.2-log variation in SARS-CoV-2 inactivation. UV-C dose at several on-N95 locations was lower than the lowest-dose locations on the chamber floor, highlighting the importance of on-N95 dose validation. Overall, we integrate optical simulation with in-situ PCI dosimetry to relate UV-C dose and viral inactivation at specific on-N95 locations, establishing a versatile approach to characterize UV-C photoinactivation of pathogens contaminating complex substrates such as N95s.

| S-EPMC8514565 | biostudies-literature

KN95 and N95 Respirators Retain Filtration Efficiency despite a Loss of Dipole Charge during Decontamination.

Project description:N95 decontamination protocols and KN95 respirators have been described as solutions to a lack of personal protective equipment. However, there are a few material science studies that characterize the charge distribution and physical changes accompanying disinfection treatments, particularly heating. Here, we report the filtration efficiency, dipole charge density, and fiber integrity of N95 and KN95 respirators before and after various decontamination methods. We found that the filter layers in N95 and KN95 respirators maintained their fiber integrity without any deformations during disinfection. The filter layers of N95 respirators were 8-fold thicker and had 2-fold higher dipole charge density than that of KN95 respirators. Emergency Use Authorization (EUA)-approved KN95 respirators showed filtration efficiencies as high as N95 respirators. Interestingly, although there was a significant drop in the dipole charge in both respirators during decontamination, there was no remarkable decrease in the filtration efficiencies due to mechanical filtration. Cotton and polyester face masks had a lower filtration efficiency and lower dipole charge. In conclusion, a loss of electrostatic charge does not directly correlate to the decreased performance of either respirator.

| S-EPMC7724761 | biostudies-literature

Plasmonic and Superhydrophobic Self-Decontaminating N95 Respirators.

Project description:The COVID-19 pandemic is endangering the world due to the spread of respiration droplets with viruses. Medical workers and frontline staff need to wear respirators to protect themselves from breathing in the virus-containing respiration droplets. The most frequently used state-of-the-art respirators are of N95 standard; however, they lack self-decontamination capabilities. In addition, the viruses and bacteria can accumulate on the respirator surfaces, possessing high risks to the wearers over long-term usage. Photothermal decontamination is a contactless, fast, low-cost, and widely available method, capable of decontaminating the respirators. Herein, we report a plasmonic photothermal and superhydrophobic coating on N95 respirators, possessing significantly better protection than existing personal protection equipment. The plasmonic heating can raise the surface temperature to over 80 °C for this type of respirator within 1 min of sunlight illumination. The superhydrophobic features prohibit respiration droplets from accumulating on the respirator surfaces. The presence of the silver nanoparticles can provide additional protection via the silver ion's disinfection toward microbes. These synergistic features of the composite coatings provide the N95 respirator with better protection and can inspire experts from interdisciplinary fields to develop better personal protection equipment to fight the COVID-19 pandemic.

| S-EPMC7315824 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data