Browse
Submit Data
Databases
API
Help

Dataset Information

15 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Colossal thermo-hydro-electrochemical voltage generation for self-sustainable operation of electronics.

ABSTRACT: Thermoelectrics are suited to converting dissipated heat into electricity for operating electronics, but the small voltage (~0.1 mV K^-1) from the Seebeck effect has been one of the major hurdles in practical implementation. Here an approach with thermo-hydro-electrochemical effects can generate a large thermal-to-electrical energy conversion factor (TtoE factor), -87 mV K^-1 with low-cost carbon steel electrodes and a solid-state polyelectrolyte made of polyaniline and polystyrene sulfonate (PANI:PSS). We discovered that the thermo-diffusion of water in PANI:PSS under a temperature gradient induced less (or more) water on the hotter (or colder) side, raising (or lowering) the corrosion overpotential in the hotter (or colder) side and thereby generating output power between the electrodes. Our findings are expected to facilitate subsequent research for further increasing the TtoE factor and utilizing dissipated thermal energy.

SUBMITTER: Zhang Y

PROVIDER: S-EPMC8421453 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

A universal self-charging system driven by random biomechanical energy for sustainable operation of mobile electronics.

Project description:Human biomechanical energy is characterized by fluctuating amplitudes and variable low frequency, and an effective utilization of such energy cannot be achieved by classical energy-harvesting technologies. Here we report a high-efficient self-charging power system for sustainable operation of mobile electronics exploiting exclusively human biomechanical energy, which consists of a high-output triboelectric nanogenerator, a power management circuit to convert the random a.c. energy to d.c. electricity at 60% efficiency, and an energy storage device. With palm tapping as the only energy source, this power unit provides a continuous d.c. electricity of 1.044?mW (7.34?W?m(-3)) in a regulated and managed manner. This self-charging unit can be universally applied as a standard 'infinite-lifetime' power source for continuously driving numerous conventional electronics, such as thermometers, electrocardiograph system, pedometers, wearable watches, scientific calculators and wireless radio-frequency communication system, which indicates the immediate and broad applications in personal sensor systems and internet of things.

| S-EPMC4682168 | biostudies-literature

A universal managing circuit with stabilized voltage for maintaining safe operation of self-powered electronics system.

Project description:Harvesting mechanical energy via a triboelectric nanogenerator (TENG) is a promising strategy for solving energy problems. However, it is necessary to develop an effective and safe energy managing circuit for preventing high voltage breaking electronic devices. Here, a universal managing circuit is developed to optimize TENG's output performance, which for the first time allows the TENG to safely power various sensor systems with a safe and stable voltage. Based on the circuit, TENG's output can be transformed into a stable voltage with tunable amplitude, while an enhanced short-circuit current of 94 mA with an energy loss lower than 5% is achieved. For demonstrations, three different types of TENGs, respectively, targeting at ocean energy, wind energy, and walking energy have been prepared to reveal the capability of the circuit. This study offers a strategy to greatly enhance the output performance of TENGs to provide useful guidance for constructing self-powered and distributed sensor systems.

| S-EPMC8170003 | biostudies-literature

Colossal tunability in high frequency magnetoelectric voltage tunable inductors.

Project description:The electrical modulation of magnetization through the magnetoelectric effect provides a great opportunity for developing a new generation of tunable electrical components. Magnetoelectric voltage tunable inductors (VTIs) are designed to maximize the electric field control of permeability. In order to meet the need for power electronics, VTIs operating at high frequency with large tunability and low loss are required. Here we demonstrate magnetoelectric VTIs that exhibit remarkable high inductance tunability of over 750% up to 10?MHz, completely covering the frequency range of state-of-the-art power electronics. This breakthrough is achieved based on a concept of magnetocrystalline anisotropy (MCA) cancellation, predicted in a solid solution of nickel ferrite and cobalt ferrite through first-principles calculations. Phase field model simulations are employed to observe the domain-level strain-mediated coupling between magnetization and polarization. The model reveals small MCA facilitates the magnetic domain rotation, resulting in larger permeability sensitivity and inductance tunability.

| S-EPMC6258707 | biostudies-literature

MycelioTronics: Fungal mycelium skin for sustainable electronics.

Project description:Electronic devices are irrevocably integrated into our lives. Yet, their limited lifetime and often improvident disposal demands sustainable concepts to realize a green electronic future. Research must shift its focus on substituting nondegradable and difficult-to-recycle materials to allow either biodegradation or facile recycling of electronic devices. Here, we demonstrate a concept for growth and processing of fungal mycelium skins as biodegradable substrate material for sustainable electronics. The skins allow common electronic processing techniques including physical vapor deposition and laser patterning for electronic traces with conductivities as high as 9.75 ± 1.44 × 104 S cm-1. The conformal and flexible electronic mycelium skins withstand more than 2000 bending cycles and can be folded several times with only moderate resistance increase. We demonstrate mycelium batteries with capacities as high as ~3.8 mAh cm-2 used to power autonomous sensing devices including a Bluetooth module and humidity and proximity sensor.

| S-EPMC9651864 | biostudies-literature

Effect of applied voltage on membrane fouling in the amplifying anaerobic electrochemical membrane bioreactor for long-term operation.

Project description:A novel and amplifying anaerobic electrochemical membrane bioreactor (AnEMBR, R2) was constructed and operated for a long time (204 days) with synthetic glucose solution having an average chemical oxygen demand (COD) of 315 mg L-1, at different applied voltages and room temperatures. More than twice sodium bicarbonate was added for maintaining a pH of around 6.7 in the supernatant of the reactor R2, close to that of a control reactor called anaerobic membrane bioreactor (AnMBR, R1), after 138 days. And the transmembrane pressure (TMP) for the R2 system was only 0.534 bar at the end of operation and 0.615 bar for the R1 system. Although the electrostatic repulsion force contributed to pushing away the pollutants (proteins, polysaccharose and inorganic salt deposits, and so on), more microorganisms adsorbed and accumulated on the membrane surface after the whole operation, which might result in a rapid increase in membrane filtration resistance in the long-term operation. There were much more exoelectrogenic bacteria, mainly Betaproteobacteria, Deltaproteobacteria and Grammaproteobacteria, on the cathode and the dominant methanogen Methanothrix content on the cathode was three times higher than the AnMBR. The study provides an important theoretical foundation for the application of AnEMBR technology in the treatment of low organic strength wastewater.

| S-EPMC9041332 | biostudies-literature

Bioelectricity Generation in a Microbial Fuel Cell with a Self-Sustainable Photocathode.

Project description:This study aims to construct an MFC with a photosynthetic algae cathode, which is maintained by self-capturing CO2 released from the anode and utilizing solar energy as energy input. With this system, a maximum power density of 187 mW/m(2) is generated when the anode off gas is piped into the catholyte under light illumination, which is higher than that of 21 mW/m(2) in the dark, demonstrating the vital contribution of the algal photosynthesis. However, an unexpected maximum power density of 146 mW/m(2) is achieved when the anode off gas is not piped into the catholyte. Measurements of cathodic microenvironments reveal that algal photosynthesis still takes place for oxygen production under this condition, suggesting the occurrence of CO2 crossover from anode to cathode through the Nafion membrane. The results of this study provide further understanding of the algae-based microbial carbon capture cell (MCC) and are helpful in improving MCC performance.

| S-EPMC4430660 | biostudies-other

Ultralow-voltage operation of light-emitting diodes.

Project description:For a light-emitting diode (LED) to generate light, the minimum voltage required is widely considered to be the emitter's bandgap divided by the elementary charge. Here we show for many classes of LEDs, including those based on perovskite, organic, quantum-dot and III-V semiconductors, light emission can be observed at record-low voltages of 36-60% of their bandgaps, exhibiting a large apparent energy gain of 0.6-1.4 eV per photon. For 17 types of LEDs with different modes of charge injection and recombination (dark saturation currents of ~10-39-10-15 mA cm-2), their emission intensity-voltage curves under low voltages show similar behaviours. These observations and their consistency with the diode simulations suggest the ultralow-voltage electroluminescence arises from a universal origin-the radiative recombination of non-thermal-equilibrium band-edge carriers whose populations are determined by the Fermi-Dirac function perturbed by a small external bias. These results indicate the potential of low-voltage LEDs for communications, computational and energy applications.

| S-EPMC9253117 | biostudies-literature

Xylindein: Naturally Produced Fungal Compound for Sustainable (Opto)electronics.

Project description:Organic semiconductors are of interest for (opto)electronic applications due to their low cost, solution processability, and tunable properties. Recently, natural product-derived organic pigments attracted attention due to their extraordinary environmental stability and unexpectedly good optoelectronic performance, in spite of only partially conjugated molecular structure. Fungi-derived pigments are a naturally sourced, sustainable class of materials that are largely unexplored as organic semiconductor materials. We present a study of the optical and electronic properties of a fungi-derived pigment xylindein, which is secreted by the wood-staining fungi Chlorociboria aeruginosa, and its blends with poly(methyl methacrylate) (PMMA) and crystalline nanocellulose (CNC). Optical absorption spectra of xylindein revealed the presence of two tautomers whose structures and properties were established using density functional theory. Pronounced pigment aggregation in polar solvents and in films, driven by intermolecular hydrogen bonding, was also observed. The pigment exhibited high photostability, electron mobility up to 0.4 cm2/(V s) in amorphous films, and thermally activated charge transport and photoresponse with activation energies of ?0.3 and 0.2 eV, respectively. The dark and photocurrents in xylindein:PMMA blends were comparable to those in pristine xylindein film, whereas blends with CNC exhibited lower currents due to inhomogeneous distribution of xylindein in the CNC.

| S-EPMC6704441 | biostudies-literature

In-built thermo-mechanical cooperative feedback mechanism for self-propelled multimodal locomotion and electricity generation.

Project description:Utilization of ubiquitous low-grade waste heat constitutes a possible avenue towards soft matter actuation and energy recovery opportunities. While most soft materials are not all that smart relying on power input of some kind for continuous response, we conceptualize a self-locked thermo-mechano feedback for autonomous motility and energy generation functions. Here, the low-grade heat usually dismissed as 'not useful' is used to fuel a soft thermo-mechano-electrical system to perform perpetual and untethered multimodal locomotions. The innately resilient locomotion synchronizes self-governed and auto-sustained temperature fluctuations and mechanical mobility without external stimulus change, enabling simultaneous harvesting of thermo-mechanical energy at the pyro/piezoelectric mechanistic intersection. The untethered soft material showcases deterministic motions (translational oscillation, directional rolling, and clockwise/anticlockwise rotation), rapid transitions and dynamic responses without needing power input, on the contrary extracting power from ambient. This work may open opportunities for thermo-mechano-electrical transduction, multigait soft energy robotics and waste heat harvesting technologies.

| S-EPMC6109106 | biostudies-literature

A Polar Tetragonal Tungsten Bronze with Colossal Second-Harmonic Generation.

Project description:A polar tetragonal tungsten bronze, Pb1.91 K3.22 □0.85 Li2.96 Nb10 O30 (□: vacancies), has been successfully synthesized by a high temperature solid-state reaction. Single crystal and powder X-ray diffraction indicate that the structure of Pb1.91 K3.22 □0.85 Li2.96 Nb10 O30 crystallizing in the noncentrosymmetric (NCS) space group, P4bm, consists of 3D framework with highly distorted NbO6 , LiO9 , PbO12 , and (Pb/K)O15 polyhedra. While NCS Pb1.91 K3.22 □0.85 Li2.96 Nb10 O30 undergoes a reversible phase transition between polar (P4bm) and nonpolar (P4/mbm) structure at around 460 °C, the material decomposes to centrosymmetric Pb1.45 K3.56 Li3.54 Nb10 O30 (P4/mbm) once heated to 1200 °C. Powder second-harmonic generation (SHG) measurements with 1064 nm radiation indicate that Pb1.91 K3.22 □0.85 Li2.96 Nb10 O30 exhibits a giant phase-matchable SHG intensity of ≈71.5 times that of KH2 PO4 , which is the strongest intensity in the visible range among all nonlinear optical materials reported to date. The observed colossal SHG should be attributable to the synergistic effect of dipole moments from the well-aligned NbO6 octahedra, the constituting distortive channels with vacancies, and highly polarizable cations.

| S-EPMC10323606 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data