Browse
Submit Data
Databases
API
Help

Dataset Information

14 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Polymerized small molecular acceptor based all-polymer solar cells with an efficiency of 16.16% via tuning polymer blend morphology by molecular design.

ABSTRACT: All-polymer solar cells (all-PSCs) based on polymerized small molecular acceptors (PSMAs) have made significant progress recently. Here, we synthesize two A-DA'D-A small molecule acceptor based PSMAs of PS-Se with benzo[c][1,2,5]thiadiazole A'-core and PN-Se with benzotriazole A'-core, for the studies of the effect of molecular structure on the photovoltaic performance of the PSMAs. The two PSMAs possess broad absorption with PN-Se showing more red-shifted absorption than PS-Se and suitable electronic energy levels for the application as polymer acceptors in the all-PSCs with PBDB-T as polymer donor. Cryogenic transmission electron microscopy visualizes the aggregation behavior of the PBDB-T donor and the PSMA in their solutions. In addition, a bicontinuous-interpenetrating network in the PBDB-T:PN-Se blend film with aggregation size of 10~20 nm is clearly observed by the photoinduced force microscopy. The desirable morphology of the PBDB-T:PN-Se active layer leads its all-PSC showing higher power conversion efficiency of 16.16%.

SUBMITTER: Du J

PROVIDER: S-EPMC8421507 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Binary Blend All-Polymer Solar Cells with a Record Efficiency of 17.41% Enabled by Programmed Fluorination Both on Donor and Acceptor Blocks.

Project description:Despite remarkable breakthrough made by virtue of "polymerized small-molecule acceptor (PSMA)" strategy recently, the limited selection pool of high-performance polymer acceptors and long-standing challenge in morphology control impede their further developments. Herein, three PSMAs of PYDT-2F, PYDT-3F, and PYDT-4F are developed by introducing different fluorine atoms on the end groups and/or bithiophene spacers to fine-tune their optoelectronic properties for high-performance PSMAs. The PSMAs exhibit narrow bandgap and energy levels that match well with PM6 donor. The fluorination promotes the crystallization of the polymer chain for enhanced electron mobility, which is further improved by following n-doping with benzyl viologen additive. Moreover, the miscibility is also improved by introducing more fluorine atoms, which promotes the intermixing with PM6 donor. Among them, PYDT-3F exhibits well-balanced high crystallinity and miscibility with PM6 donor; thus, the layer-by-layer processed PM6/PYDT-3F film obtains an optimal nanofibril morphology with submicron length and ≈23 nm width of fibrils, facilitating the charge separation and transport. The resulting PM6/PYDT-3F devices realizes a record high power conversion efficiency (PCE) of 17.41% and fill factor of 77.01%, higher than the PM6/PYDT-2F (PCE = 16.25%) and PM6/PYDT-4F (PCE = 16.77%) devices.

| S-EPMC9376845 | biostudies-literature

Simultaneous enhanced efficiency and thermal stability in organic solar cells from a polymer acceptor additive.

Project description:The thermal stability of organic solar cells is critical for practical applications of this emerging technology. Thus, effective approaches and strategies need to be found to alleviate their inherent thermal instability. Here, we show a polymer acceptor-doping general strategy and report a thermally stable bulk heterojunction photovoltaic system, which exhibits an improved power conversion efficiency of 15.10%. Supported by statistical analyses of device degradation data, and morphological characteristics and physical mechanisms study, this polymer-doping blend shows a longer lifetime, nearly keeping its efficiency (t = 800 h) under accelerated aging tests at 150 oC. Further analysis of the degradation behaviors indicates a bright future of this system in outer space applications. Notably, the use of polymer acceptor as a dual function additive in the other four photovoltaic systems was also confirmed, demonstrating the good generality of this polymer-doping strategy.

| S-EPMC7057953 | biostudies-literature

Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells.

Project description:Although the field of polymer solar cell has seen much progress in device performance in the past few years, several limitations are holding back its further development. For instance, current high-efficiency (>9.0%) cells are restricted to material combinations that are based on limited donor polymers and only one specific fullerene acceptor. Here we report the achievement of high-performance (efficiencies up to 10.8%, fill factors up to 77%) thick-film polymer solar cells for multiple polymer:fullerene combinations via the formation of a near-ideal polymer:fullerene morphology that contains highly crystalline yet reasonably small polymer domains. This morphology is controlled by the temperature-dependent aggregation behaviour of the donor polymers and is insensitive to the choice of fullerenes. The uncovered aggregation and design rules yield three high-efficiency (>10%) donor polymers and will allow further synthetic advances and matching of both the polymer and fullerene materials, potentially leading to significantly improved performance and increased design flexibility.

| S-EPMC4242436 | biostudies-literature

Controlling Morphology and Molecular Packing of Alkane Substituted Phthalocyanine Blend Bulk Heterojunction Solar Cells.

Project description:Systematic changes in the exocyclic substiution of core phthalocyanine platform tune the absorption properties to yield commercially viable dyes that function as the primary light absorbers in organic bulk heterojunction solar cells. Blends of these complementary phthalocyanines absorb a broader portion of the solar spectrum compared to a single dye, thereby increasing solar cell performance. We correlate grazing incidence small angle x-ray scattering structural data with solar cell performance to elucidate the role of nanomorphology of active layers composed of blends of phthalocyanines and a fullerene derivative. A highly reproducible device architecture is used to assure accuracy and is relevant to films for solar windows in urban settings. We demonstrate that the number and structure of the exocyclic motifs dictate phase formation, hierarchical organization, and nanostructure, thus can be employed to tailor active layer morphology to enhance exciton dissociation and charge collection efficiencies in the photovoltaic devices. These studies reveal that disordered films make better solar cells, short alkanes increase the optical density of the active layer, and branched alkanes inhibit unproductive homogeneous molecular alignment.

| S-EPMC3624905 | biostudies-literature

A New Nonfullerene Acceptor with Near Infrared Absorption for High Performance Ternary-Blend Organic Solar Cells with Efficiency over 13.

Project description:A new acceptor-donor-acceptor (A-D-A) type nonfullerene acceptor, 3TT-FIC, which has three fused thieno[3,2-b]thiophene as the central core and difluoro substituted indanone as the end groups, is designed and synthesized. 3TT-FIC exhibits broad and strong absorption with extended onset absorption to 995 nm and a low optical bandgap of 1.25 eV. The binary device based on 3TT-FIC and the polymer PTB7-Th exhibits a power conversion efficiency (PCE) of 12.21% with a high short circuit current density ( Jsc) of 25.89 mA cm-2. To fine-tune the morphology and make full use of the visible region sunlight, phenyl-C71-butyricacid-methyl ester (PC71BM) is used as the third component to fabricate ternary devices. In contrast to the binary devices, the ternary blend organic solar cells show significantly enhanced EQE ranging from 300 to 700 nm and thus an improved Jsc with a high value of 27.73 mA cm-2. A high PCE with a value of 13.54% is achieved for the ternary devices, which is one of the highest efficiencies in single junction organic solar cells reported to date. The results provide valuable insight for the ternary devices in which the external quantum efficiency (EQE) induced by the third component is evidently observed and directly contributed to the enhancement of the device efficiency.

| S-EPMC6010751 | biostudies-literature

An Optimized Fibril Network Morphology Enables High?Efficiency and Ambient?Stable Polymer Solar Cells

Project description:Abstract Morphological stability is crucially important for the long?term stability of polymer solar cells (PSCs). Many high?efficiency PSCs suffer from metastable morphology, resulting in severe device degradation. Here, a series of copolymers is developed by manipulating the content of chlorinated benzodithiophene?4,8?dione (T1?Cl) via a random copolymerization approach. It is found that all the copolymers can self?assemble into a fibril nanostructure in films. By altering the T1?Cl content, the polymer crystallinity and fibril width can be effectively controlled. When blended with several nonfullerene acceptors, such as TTPTT?4F, O?INIC3, EH?INIC3, and Y6, the optimized fibril interpenetrating morphology can not only favor charge transport, but also inhibit the unfavorable molecular diffusion and aggregation in active layers, leading to excellent morphological stability. The work demonstrates the importance of optimization of fibril network morphology in realizing high?efficiency and ambient?stable PSCs, and also provides new insights into the effect of chemical structure on the fibril network morphology and photovoltaic performance of PSCs. A series of copolymers via a random copolymerization approach are designed and synthesized. The well?defined fibril interpenetrating morphology with appropriate phase separation in PT2?based blends can efficiently suppress the unfavorable aggregation, resulting in excellent morphological stability and high efficiency. The work demonstrates the importance of optimization of fibril network morphology in realizing high?efficiency and ambient?stable polymer solar cells.

| S-EPMC7509652 | biostudies-literature

High-efficiency and air-stable P3HT-based polymer solar cells with a new non-fullerene acceptor.

Project description:Solution-processed organic photovoltaics (OPV) offer the attractive prospect of low-cost, light-weight and environmentally benign solar energy production. The highest efficiency OPV at present use low-bandgap donor polymers, many of which suffer from problems with stability and synthetic scalability. They also rely on fullerene-based acceptors, which themselves have issues with cost, stability and limited spectral absorption. Here we present a new non-fullerene acceptor that has been specifically designed to give improved performance alongside the wide bandgap donor poly(3-hexylthiophene), a polymer with significantly better prospects for commercial OPV due to its relative scalability and stability. Thanks to the well-matched optoelectronic and morphological properties of these materials, efficiencies of 6.4% are achieved which is the highest reported for fullerene-free P3HT devices. In addition, dramatically improved air stability is demonstrated relative to other high-efficiency OPV, showing the excellent potential of this new material combination for future technological applications.

| S-EPMC4906164 | biostudies-other

Significantly Improved Morphology and Efficiency of Nonhalogenated Solvent-Processed Solar Cells Derived from a Conjugated Donor-Acceptor Block Copolymer.

Project description:A highly crystalline conjugated donor (D)-acceptor (A) block copolymer (PBDT2T-b-N2200) that has good solubility in nonhalogenated solvents is successfully synthesized. PBDT2T-b-N2200 shows a broad complementary absorption behavior owing to a wide-band gap donor (PBDT2T) present as a D-block and a narrow-band gap acceptor (N2200) present as an A-block. Polymer solar cells (PSCs) with conjugated block copolymer (CBCP) are fabricated using a toluene solution and PSC created with an annealed film showing the highest power conversion efficiency of 6.43%, which is 2.4 times higher than that made with an annealed blend film of PBDT2T and N2200. Compared to the blend film, the PBDT2T-b-N2200 film exhibits a highly improved surface and internal morphology, as well as a faster photoluminescence decay lifetime, indicating a more efficient photoinduced electron transfer. In addition, the PBDT2T-b-N2200 film shows high crystallinity through an effective self-assembly of each block during thermal annealing and a predominant face-on chain orientation favorable to a vertical-type PSC. Moreover, the CBCP-based PSCs exhibit an excellent shelf-life time of over 1020 h owing to their morphological stability. From these results, a D-A block copolymer system is one of the efficient strategies to improve miscibility and morphological stability in all polymer blend systems.

| S-EPMC7029657 | biostudies-literature

High efficiency all-polymer tandem solar cells.

Project description:In this work, we have reported for the first time an efficient all-polymer tandem cell using identical sub-cells based on P2F-DO:N2200. A high power conversion efficiency (PCE) of 6.70% was achieved, which is among the highest efficiencies for all polymer solar cells and 43% larger than the PCE of single junction cell. The largely improved device performance can be mainly attributed to the enhanced absorption of tandem cell. Meanwhile, the carrier collection in device remains efficient by optimizing the recombination layer and sub-cell film thickness. Thus tandem structure can become an easy approach to effectively boost the performance of current all polymer solar cells.

| S-EPMC4881030 | biostudies-literature

A Non-Conjugated Polymer Acceptor for Efficient and Thermally Stable All-Polymer Solar Cells.

Project description:A non-conjugated polymer acceptor PF1-TS4 was firstly synthesized by embedding a thioalkyl segment in the mainchain, which shows excellent photophysical properties on par with a fully conjugated polymer, with a low optical band gap of 1.58 eV and a high absorption coefficient >105 cm-1 , a high LUMO level of -3.89 eV, and suitable crystallinity. Matched with the polymer donor PM6, the PF1-TS4-based all-PSC achieved a power conversion efficiency (PCE) of 8.63 %, which is ≈45 % higher than that of a device based on the small molecule acceptor counterpart IDIC16. Moreover, the PF1-TS4-based all-PSC has good thermal stability with ≈70 % of its initial PCE retained after being stored at 85 °C for 180 h, while the IDIC16-based device only retained ≈50 % of its initial PCE when stored at 85 °C for only 18 h. Our work provides a new strategy to develop efficient polymer acceptor materials by linkage of conjugated units with non-conjugated thioalkyl segments.

| S-EPMC7692906 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data