Browse
Submit Data
Databases
API
Help

Dataset Information

19 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Ethanol-based disinfectant sprays drive rapid changes in the chemical composition of indoor air in residential buildings.

ABSTRACT: The COVID-19 pandemic has resulted in increased usage of ethanol-based disinfectants for surface inactivation of SARS-CoV-2 in buildings. Emissions of volatile organic compounds (VOCs) and particles from ethanol-based disinfectant sprays were characterized in real-time (1 Hz) via a proton transfer reaction time-of-flight mass spectrometer (PTR-TOF-MS) and a high-resolution electrical low-pressure impactor (HR-ELPI+), respectively. Ethanol-based disinfectants drove sudden changes in the chemical composition of indoor air. VOC and particle concentrations increased immediately after application of the disinfectants, remained elevated during surface contact time, and gradually decreased after wiping. The disinfectants produced a broad spectrum of VOCs with mixing ratios spanning the sub-ppb to ppm range. Ethanol was the dominant VOC emitted by mass, with concentrations exceeding 10³ μg m^-3 and emission factors ranging from 10¹ to 10² mg g^-1. Listed and unlisted diols, monoterpenes, and monoterpenoids were also abundant. The pressurized sprays released significant quantities (10⁴-10⁵ cm^-3) of nano-sized particles smaller than 100 nm, resulting in large deposited doses in the tracheobronchial and pulmonary regions of the respiratory system. Inhalation exposure to VOCs varied with time during the building disinfection events. Much of the VOC inhalation intake (>60 %) occurred after the disinfectant was sprayed and wiped off the surface. Routine building disinfection with ethanol-based sprays during the COVID-19 pandemic may present a human health risk given the elevated production of volatile chemicals and nano-sized particles.

SUBMITTER: Jiang J

PROVIDER: S-EPMC8423670 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

A review of critical residential buildings parameters and activities when investigating indoor air quality and pollutants.

Project description:Indoor air in residential dwellings can contain a variety of chemicals, sometimes present at concentrations or in combinations which can have a negative impact on human health. Indoor Air Quality (IAQ) surveys are often required to characterize human exposure or to investigate IAQ concerns and complaints. Such surveys should include sufficient contextual information to elucidate sources, pathways, and the magnitude of exposures. The aim of this review was to investigate and describe the parameters that affect IAQ in residential dwellings: building location, layout, and ventilation, finishing materials, occupant activities, and occupant demography. About 180 peer-reviewed articles, published from 01/2013 to 09/2021 (plus some important earlier publications), were reviewed. The importance of the building parameters largely depends on the study objectives and whether the focus is on a specific pollutant or to assess health risk. When considering classical pollutants such as particulate matter (PM) or volatile organic compounds (VOCs), the building parameters can have a significant impact on IAQ, and detailed information of these parameters needs to be reported in each study. Research gaps and suggestions for the future studies together with recommendation of where measurements should be done are also provided.

| S-EPMC9828800 | biostudies-literature

Harm from Residential Indoor Air Contaminants.

Project description:This study presents a health-centered approach to quantify and compare the chronic harm caused by indoor air contaminants using disability-adjusted life-year (DALY). The aim is to understand the chronic harm caused by airborne contaminants in dwellings and identify the most harmful. Epidemiological and toxicological evidence of population morbidity and mortality is used to determine harm intensities, a metric of chronic harm per unit of contaminant concentration. Uncertainty is evaluated in the concentrations of 45 indoor air contaminants commonly found in dwellings. Chronic harm is estimated from the harm intensities and the concentrations. The most harmful contaminants in dwellings are PM2.5, PM10-2.5, NO2, formaldehyde, radon, and O3, accounting for over 99% of total median harm of 2200 DALYs/105 person/year. The chronic harm caused by all airborne contaminants in dwellings accounts for 7% of the total global burden from all diseases.

| S-EPMC10785761 | biostudies-literature

Study of the Characteristics and Comprehensive Fuzzy Assessment of Indoor Air Chemical Contamination in Public Buildings.

Project description:Quality-of-life is improving daily with continuous improvements in urban modernization, which necessitates more stringent requirements for indoor air quality. Fuzzy assessment enables us to obtain the grade of the evaluation object by compound calculation with the help of membership function and weight coefficient, overcoming the limitations of traditional methods applied to develop environmental quality indices. First, this study continuously measured SO2, O3, NO2, NO, CO, CO2, PM10, PM2.5, and other chemical pollutants during the daytime operating hours of a library and a canteen. We analyzed the concentration distributions of the particles in the air were discussed based on 31 different particle diameters. Finally, the experimental data in department store and waiting hall were analyzed by fuzzy evaluation, with the following results. (1) The library and canteen PM10 concentrations peaked at 07:45 in the morning and was elevated during the afternoon (48.9 and 59 μg/m3, respectively). (2) The Pearson correlation coefficient of the PM10 and PM2.5 concentrations in the library was 0.98. PM10 and SO2 in the canteen were negatively correlated, with a correlation coefficient of -0.65. PM2.5 and PM1 were always highly positively correlated. (3) The high concentration of particles in the library was associated with the small particle size range (0.25~0.45 μm). (4) By applying the fuzzy comprehensive evaluation method, the library grade evaluation was the highest level, and the waiting hall was the lowest. This study enhances our understanding of the indoor chemical contamination relationships for public buildings and highlights the urgent need for improving indoor air quality.

| S-EPMC8138320 | biostudies-literature

Quality of indoor residential air and health.

Project description:About 90% of our time is spent indoors where we are exposed to chemical and biological contaminants and possibly to carcinogens. These agents may influence the risk of developing nonspecific respiratory and neurologic symptoms, allergies, asthma and lung cancer. We review the sources, health effects and control strategies for several of these agents. There are conflicting data about indoor allergens. Early exposure may increase or may decrease the risk of future sensitization. Reports of indoor moulds or dampness or both are consistently associated with increased respiratory symptoms but causality has not been established. After cigarette smoking, exposure to environmental tobacco smoke and radon are the most common causes of lung cancer. Homeowners can improve the air quality in their homes, often with relatively simple measures, which should provide health benefits.

| S-EPMC2443227 | biostudies-literature

Field-based longitudinal study design for measuring the association between indoor air quality and occupant health status in residential buildings.

Project description:There has been a growing interest in the association between indoor air quality (IAQ) with an increase in the time spent at home. However, there is still a lack of evidence on the impact of IAQ on occupants' health and well-being in the long term. This study aimed to develop a field-based longitudinal study design to evaluate the IAQ level and daily symptoms of adults and children living in different types of buildings over one year. We proposed vital principles to be considered when recruiting the study participants so that potential confounders, such as age, underlying diseases, and the geographic area would be either removed in advance or matched between different building types. We suggested collecting exposure and outcome data in three categories: lifestyle and housing environment, IAQ measurement, and occupants' health. We presented web-based survey tools for collecting housing and health data, and the frequency of data collection varied from weekly to six-month intervals. We developed two different models using a generalized mixed model for modeling the association between housing environment, IAQ, and human health. The current study design could be applied for future studies on the association between built environment and health, regardless of the type of buildings.•A real-time indoor air quality monitor was used to monitor indoor air parameters every 5 mins over one year.•A simple web-based survey tool was developed to collect data for occupants' daily symptoms in the long term.•A binomial generalized linear mixed model and a Poisson generalized linear mixed model was developed to evaluate the association between indoor air parameters, and building types and daily symptoms.

| S-EPMC8374450 | biostudies-literature

One-year dataset of hourly air quality parameters from 100 air purifiers used in China residential buildings.

Project description:Household air purifiers have been widely used as an effective approach to improving indoor air quality. Air purifiers can automatically record indoor air quality parameters, providing valuable data resources for in-depth data-driven analysis. This work presents a one-year hourly indoor air quality dataset collected by household air purifiers in 100 residential homes in 18 provinces across 4 different climate zones in China. The data were collected from July 1, 2021, to July 1, 2022. The concentrations of formaldehyde, PM2.5, TVOC, temperature, relative humidity, on/off status and the airflow rate of air purifiers during operations were recorded hourly. The data were carefully screened with possibly missing values imputed using chained equation-based methods if any. The dataset provides a comprehensive and detailed picture of the indoor air quality in residential buildings, enabling evaluations on the cleaning effect of air purifiers, the impact of outdoor climate change on indoor air quality, and the future trends in indoor human behavior.

| S-EPMC10584929 | biostudies-literature

Dust Events and Indoor Air Quality in Residential Homes in Kuwait.

Project description:Kuwait is a developed Middle Eastern country that is impacted by frequent dust storms from regional and/or remote deserts. The effectiveness of keeping homes tightly closed during these events to reduce dust exposures was assessed using indoor and outdoor particle samples at 10 residences within the metropolitan Kuwait City area. Specifically, this study compared indoor and outdoor levels of black carbon and 19 trace elements (Na, Mg, Al, Si, S, Cl, K, Ca, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, Br, Sr, and Zr) during dust and non-dust events and found that particle penetration efficiencies were lower during dust storm events (less than 20-30%) than during non-dust storm events (40-60%). Coarse particles had lower penetration efficiency compared to fine particles, which is due to differences in infiltration rates and settling velocities between these two size fractions. Our findings suggest that increasing home insulation could be an effective strategy to reduce indoor exposure to crustal particles from dust storm events in residential houses of Kuwait City.

| S-EPMC7178282 | biostudies-literature

A systematic literature review on indoor PM<sub>2.5</sub> concentrations and personal exposure in urban residential buildings.

Project description:Particulate matter with an aerodynamic diameter less than 2.5μm (PM2.5) is currently a major air pollutant that has been raising public attention. Studies have found that short/long-term exposure to PM2.5 lead detrimental health effects. Since people in most region of the world spend a large proportion of time in dwellings, personal exposure to PM2.5 in home microenvironment should be carefully investigated. The objective of this review is to investigate and summary studies in terms of personal exposure to indoor PM2.5 pollutants from the literature between 2000 and 2021. Factors from both outdoor and indoor environment that have impact on indoor PM2.5 levels were explicated. Exposure studies were verified relating to individual activity pattern and exposure models. It was found that abundant investigations in terms of personal exposure to indoor PM2.5 is affected by factors including concentration level, exposure duration and personal diversity. Personal exposure models, including microenvironment model, mathematical model, stochastic model and other simulation models of particle deposition in different regions of human airway are reviewed. Further studies joining indoor measurement and simulation of PM2.5 concentration and estimation of deposition in human respiratory tract are necessary for individual health protection.

| S-EPMC9434053 | biostudies-literature

Prediction of Indoor Air Exposure from Outdoor Air Quality Using an Artificial Neural Network Model for Inner City Commercial Buildings.

Project description:NO₂ and particulate matter are the air pollutants of most concern in Ireland, with possible links to the higher respiratory and cardiovascular mortality and morbidity rates found in the country compared to the rest of Europe. Currently, air quality limits in Europe only cover outdoor environments yet the quality of indoor air is an essential determinant of a person's well-being, especially since the average person spends more than 90% of their time indoors. The modelling conducted in this research aims to provide a framework for epidemiological studies by the use of publically available data from fixed outdoor monitoring stations to predict indoor air quality more accurately. Predictions are made using two modelling techniques, the Personal-exposure Activity Location Model (PALM), to predict outdoor air quality at a particular building, and Artificial Neural Networks, to model the indoor/outdoor relationship of the building. This joint approach has been used to predict indoor air concentrations for three inner city commercial buildings in Dublin, where parallel indoor and outdoor diurnal monitoring had been carried out on site. This modelling methodology has been shown to provide reasonable predictions of average NO₂ indoor air quality compared to the monitored data, but did not perform well in the prediction of indoor PM2.5 concentrations. Hence, this approach could be used to determine NO₂ exposures more rigorously of those who work and/or live in the city centre, which can then be linked to potential health impacts.

| S-EPMC4690911 | biostudies-literature

Transitioning to high efficiency air conditioning in Saudi Arabia: A benefit cost analysis for residential buildings

Project description:This paper assesses the benefits of transitioning to high efficiency air conditioning (AC) equipment for existing units specific to the residential building stock in the Kingdom of Saudi Arabia (KSA). The analysis is based on a calibrated residential building stock model for Saudi Arabia supported by national statistics regarding the characteristics of AC systems. Various housing prototypes, vintages, and locations are included in the analysis. Specifically, the analysis considers the scaling up of the government's High Efficiency AC (HEAC) program which offers 900 Saudi Riyals (240 USD) per unit to consumers for up to 6 split system units with an energy efficiency rating (EER) of 13.0 or more per household. The main findings of the study suggest that upgrading the existing old stock of window units and split systems currently in place to the requirements of HEAC program would generate a reduction in electricity consumption of around 33 TWh/year and 24 million tons of CO2. Due to the effect of the HEAC consumer subsidy, purchasing a high efficiency unit has a simple payback period for the consumer of 5 years which is faster than less efficient AC options. This would come at a cost to the government of approximately 6 Billion USD resulting in an annual income of 3.0 Billion USD from the sale of avoided fuel associated with the saved electricity consumption. Highlights • Improving energy efficiency of Saudi residential AC stock can save 33 TWh per year.• Phasing out window AC systems can result in electricity savings of 20 TWh per year.• Stringent MEPS for ACs can lower carbon emissions by 24.0 Million-Tons annually.• Saudi government can recover in 2 years the costs for phasing out inefficient ACs.

| S-EPMC7185004 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data