Application of the amplification-free SERS-based CRISPR/Cas12a platform in the identification of SARS-CoV-2 from clinical samples.
Ontology highlight
ABSTRACT:
SUBMITTER: Liang J
PROVIDER: S-EPMC8424404 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Antigen detection provides particularly valuable information for medical diagnoses; however, the current detection methods are less sensitive and accurate than nucleic acid analysis. The combination of CRISPR/Cas12a and aptamers provides a new detection paradigm, but sensitive sensing and stable amplification in antigen detection remain challenging. Here, we present a PCR-free multiple trigger dsDNA tandem-based signal amplification strategy and a de novo designed dual aptamer synergistic sensing strategy. Integration of these two strategies endowed the CRISPR/Cas12a and aptamer-based method with ultra-sensitive, fast, and stable antigen detection. In a demonstration of this method, the limit of detection was at the single virus level (0.17 fM, approximately two copies/μL) in SARS-CoV-2 antigen nucleocapsid protein analysis of saliva or serum samples. The entire procedure required only 20 min. Given our system's simplicity and modular setup, we believe that it could be adapted reasonably easily for general applications in CRISPR/Cas12a-aptamer-based detection.
| S-EPMC8440162 | biostudies-literature
Project description:BackgroundCOVID-19 has spread rapidly around the world, affecting a large percentage of the population. When lifting certain mandatory measures for an economic restart, robust surveillance must be established and implemented, with nucleic acid detection for SARS-CoV-2 as an essential component.MethodsWe tried to develop a one-tube detection platform based on RT-RPA (Reverse Transcription and Recombinase Polymerase Isothermal Amplification) and DNA Endonuclease-Targeted CRISPR Trans Reporter (DETECTR) technology, termed OR-DETECTR, to detect SARS-CoV-2. We designed RT-RPA primers of the RdRp and N genes following the SARS-CoV-2 gene sequence. We optimized reaction components so that the detection process could be carried out in one tube. Specificity was demonstrated by detecting nucleic acid samples from pseudoviruses from seven human coronaviruses and Influenza A (H1N1). Clinical samples were used to validate the platform and all results were compared to rRT-PCR. RNA standards and pseudoviruses diluted by different gradients were used to demonstrate the detection limit. Additionally, we have developed a lateral flow assay based on OR-DETECTR for detecting COVID-19.ResultsThe OR-DETECTR detection process can be completed in one tube, which takes approximately 50 min. This method can specifically detect SARS-CoV-2 from seven human coronaviruses and Influenza A (H1N1), with a low detection limit of 2.5 copies/µl input (RNA standard) and 1 copy/µl input (pseudovirus). Results of six samples from SARS-CoV-2 patients, eight samples from patients with fever but no SARS-CoV-2 infection, and one mixed sample from 40 negative controls showed that OR-DETECTR is 100% consistent with rRT-PCR. The lateral flow assay based on OR-DETECTR can be used for the detection of COVID-19, and the detection limit is 2.5 copies/µl input.ConclusionsThe OR-DETECTR platform for the detection of COVID-19 is rapid, accurate, tube closed, easy-to-operate, and free of large instruments.
| S-EPMC7884969 | biostudies-literature
Project description:The pandemic of COVID-19 creates an imperative need for sensitive and portable detection of SARS-CoV-2. We devised a SERS-read, CRISPR/Cas-powered nanobioassay, termed as OVER-SARS-CoV-2 (One-Vessel Enhanced RNA test on SARS-CoV-2), which enabled supersensitive, ultrafast, accurate and portable detection of SARS-CoV-2 in a single vessel in an amplification-free and anti-interference manner. The SERS nanoprobes were constructed by conjugating gold nanoparticles with Raman reporting molecular and single-stranded DNA (ssDNA) probes, whose aggregation-to-dispersion changes can be finely tuned by target-activated Cas12a though trans-cleavage of linker ssDNA. As such, the nucleic acid signals could be dexterously converted and amplified to SERS signals. By customizing an ingenious vessel, the steps of RNA reverse transcription, Cas12a trans-cleavage and SERS nanoprobes crosslinking can be integrated into a single and disposal vessel. It was proved that our proposed nanobioassay was able to detect SARS-CoV-2 as low as 200 copies/mL without any pre-amplification within 45 min. In addition, the proposed nanobioassay was confirmed by clinical swab samples and challenged for SARS-CoV-2 detection in simulated complex environmental and food samples. This work enriches the arsenal of CRISPR-based diagnostics (CRISPR-Dx) and provides a novel and robust platform for SARS-CoV-2 decentralized detection, which can be put into practice in the near future.
| S-EPMC10005974 | biostudies-literature
Project description:The recent outbreak of betacoronavirus Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2), which is responsible for the Coronavirus Disease 2019 (COVID-19) global pandemic, has created great challenges in viral diagnosis. The existing methods for nucleic acid detection are of high sensitivity and specificity, but the need for complex sample manipulation and expensive machinery slow down the disease detection. Thus, there is an urgent demand to develop a rapid, inexpensive, and sensitive diagnostic test to aid point-of-care viral detection for disease monitoring. In this study, we developed a clustered regularly interspaced short palindromic repeats (CRISPR)-CRISPR associated proteins (Cas) 12a-based diagnostic method that allows the results to be visualized by the naked eye. We also introduced a rapid sample processing method, and when combined with recombinase polymerase amplification (RPA), the sample to result can be achieved in 50 minutes with high sensitivity (1-10 copies per reaction). This accurate and portable detection method holds a great potential for COVID-19 control, especially in areas where specialized equipment is not available.
| S-EPMC7737895 | biostudies-literature
Project description:The livestock industry has been deeply affected by African swine fever virus (ASFV) and Capripoxvirus (CaPV), which caused an enormous economic damage. It is emergent to develop a reliable detection method. Here, we developed a rapid, ultra-sensitive, and one-pot DNA detection method combining recombinase polymerase amplification (RPA) and CRISPR/Cas12a for ASFV and CaPV, named one-pot-RPA-Cas12a (OpRCas) platform. It had the virtue of both RPA and CRISPR/Cas12a, such as high amplification efficiency, constant temperature reaction, and strict target selectivity, which made diagnosis simplified, accurate and easy to be operated without expensive equipment. Meanwhile, the reagents of RPA and CRISPR/Cas12a were added to the lid and bottom of tube in one go, which overcame the incompatibility of two reactions and aerosol contamination. To save cost, we only need a quarter of the amount of regular RPA per reaction which is enough to achieve clinical diagnosis. The OpRCas platform was 10 to 100 times more sensitive than qPCR; the limit of detection (LOD) was as low as 1.2 × 10-6 ng/µL (3.07 copies/µL by ddPCR) of ASFV and 7.7 × 10-5 ng/µL (1.02 copies/µL by ddPCR) of CaPV with the portable fluorometer in 40 min. In addition, the OpRCas platform combined with the lateral flow assay (LFA) strip to suit for point-of-care (POC) testing. It showed 93.3% consistency with qPCR for clinical sample analysis. Results prove that OpRCas platform is an easy-handling, ultra-sensitive, and rapid to achieve ASFV and CaPV POC testing. KEY POINTS: • The platform realizes one-pot reaction of RPA and Cas12a. • Sensitivity is 100 times more than qPCR. • Three output modes are suitable to be used to quantitative test or POC testing.
| S-EPMC9201268 | biostudies-literature
Project description:The outbreak of the pandemic caused by the severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) calls for an urgent unmet need for developing a facial and cost-effective detection method. The requirement of well-trained personnel and sophisticated instrument of current primary mean (reverse transcription polymerase chain reaction, RT-PCR) may hinder the practical application worldwide. In this regard, a reverse transcription recombinase polymerase amplification (RT-RPA) coupled with CRISPR-Cas12a colorimetric assay is proposed for the SARS-CoV-2 detection. The methodology we have described herein utilizes DNA-modified gold nanoparticles (AuNPs) as a universal colorimetric readout and can specifically target ORF1ab and N regions of the SARS-CoV-2 genome. After the virus genome is amplified through RT-RPA, the resulting abundant dsDNA will bind and activate Cas12a. Under trans-cleavage degradation, the capped DNA substrate will be hydrolyzed gradually from AuNPs, demonstrating a change in the surface plasmon resonance (SPR), which can be facially monitored by UV-vis absorbance spectroscopy and naked eye observation. The high amplification efficiency from RT-RPA and Cas12a trans-cleavage process bring the sensitivity of our method to 1 copy of viral genome sequence per test. Notably, under the dual variations inspecting from the isothermal amplification and Cas12a activation process, the false positive events from other beta coronavirus members can be effectively avoided and thus significantly improve the specificity. Furthermore, the reliability of this colorimetric assay is validated by standard clinical samples from the hospital laboratory department. Through integration of the inherently high sensitivity and specificity from an RPA-coupled Cas12a system with the intrinsic simplicity of AuNP-based colorimetric assay, our method increases the practical testing availability of SARS-CoV-2.
| S-EPMC7885800 | biostudies-literature
Project description:CRISPR-Cas technology has widely been applied to detect single-nucleotide mutation and is considered as the next generation of molecular diagnostics. We previously reported the combination of nucleic acid amplification (NAA) and CRISPR-Cas12a system to distinguish major severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) variants. However, the mixture of NAA and CRISPR-Cas12a reagents in one tube could interfere with the efficiency of NAA and CRISPR-Cas12a cleavage, which in turn affects the detection sensitivity. In the current study, we employed a novel photoactivated CRISPR-Cas12a strategy integrated with recombinase polymerase amplification (RPA) to develop one-pot RPA/CRISPR-Cas12a genotyping assay for detecting SARS-CoV-2 Omicron sub-lineages. The new system overcomes the potential inhibition of RPA due to early CRISPR-Cas12a activation and cleavage of the target template in traditional one-pot assay using photocleavable p-RNA, a complementary single-stranded RNA to specifically bind crRNA and precisely block Cas12a activation. The detection can be finished in one tube at 39℃ within 1 h and exhibits a low limit of detection of 30 copies per reaction. Our results demonstrated that the photocontrolled one-pot RPA/CRISPR-Cas12a assay could effectively identify three signature mutations in the spike gene of SARS-CoV-2 Omicron variant, namely, R346T, F486V, and 49X, and distinguish Omicron BA.1, BA.5.2, and BF.7 sub-lineages. Furthermore, the assay achieved a sensitivity of 97.3% and a specificity of 100.0% and showed a concordance of 98.3% with Sanger sequencing results.IMPORTANCEWe successfully developed one-pot recombinase polymerase amplification/CRISPR-Cas12a genotyping assay by adapting photocontrolled CRISPR-Cas technology to optimize the conditions of nucleic acid amplification and CRISPR-Cas12a-mediated detection. This innovative approach was able to quickly distinguish severe acute respiratory syndrome coronavirus 2 Omicron variants and can be readily modified for detecting any nucleic acid mutations. The assay system demonstrates excellent clinical performance, including rapid detection, user-friendly operations, and minimized risk of contamination, which highlights its promising potential as a point-of-care testing for wide applications in resource-limiting settings.
| S-EPMC10913417 | biostudies-literature
Project description:The December 2019 outbreak of a novel respiratory virus, SARS-CoV-2, has become an ongoing global pandemic due in part to the challenge of identifying symptomatic, asymptomatic, and pre-symptomatic carriers of the virus. CRISPR diagnostics can augment gold-standard PCR-based testing if they can be made rapid, portable, and accurate. Here, we report the development of an amplification-free CRISPR-Cas13a assay for direct detection of SARS-CoV-2 from nasal swab RNA that can be read with a mobile phone microscope. The assay achieved ∼100 copies/μL sensitivity in under 30 min of measurement time and accurately detected pre-extracted RNA from a set of positive clinical samples in under 5 min. We combined crRNAs targeting SARS-CoV-2 RNA to improve sensitivity and specificity and directly quantified viral load using enzyme kinetics. Integrated with a reader device based on a mobile phone, this assay has the potential to enable rapid, low-cost, point-of-care screening for SARS-CoV-2.
| S-EPMC7834310 | biostudies-literature
Project description:The continuous and rapid surge of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) variants with high transmissibility and evading neutralization is alarming, necessitating expeditious detection of the variants concerned. Here, we report the development of rapid SARS-CoV-2 variants enzymatic detection (SAVED) based on CRISPR-Cas12a targeting of previously crucial variants, including Alpha, Beta, Gamma, Delta, Lambda, Mu, Kappa, and currently circulating variant of concern (VOC) Omicron and its subvariants BA.1, BA.2, BA.3, BA.4, and BA.5. SAVED is inexpensive (US$3.23 per reaction) and instrument-free. SAVED results can be read out by fluorescence reader and tube visualization under UV/blue light, and it is stable for 1 h, enabling high-throughput screening and point-of-care testing. We validated SAVED performance on clinical samples with 100% specificity in all samples and 100% sensitivity for the current pandemic Omicron variant samples having a threshold cycle (CT) value of ≤34.9. We utilized chimeric CRISPR RNA (crRNA) and short crRNA (15-nucleotide [nt] to 17-nt spacer) to achieve single nucleotide polymorphism (SNP) genotyping, which is necessary for variant differentiation and is a challenge to accomplish using CRISPR-Cas12a technology. We propose a scheme that can be used for discriminating variants effortlessly and allows for modifications to incorporate newer upcoming variants as the mutation site of these variants may reappear in future variants. IMPORTANCE Rapid differentiation and detection tests that can directly identify SARS-CoV-2 variants must be developed in order to meet the demands of public health or clinical decisions. This will allow for the prompt treatment or isolation of infected people and the implementation of various quarantine measures for those exposed. We report the development of the rapid SARS-CoV-2 variants enzymatic detection (SAVED) method based on CRISPR-Cas12a that targets previously significant variants like Alpha, Beta, Gamma, Delta, Lambda, Mu, and Kappa as well as the VOC Omicron and its subvariants BA.1, BA.2, BA.3, BA.4, and BA.5 that are currently circulating. SAVED uses no sophisticated instruments and is reasonably priced ($3.23 per reaction). As the mutation location of these variations may reoccur in subsequent variants, we offer a system that can be applied for variant discrimination with ease and allows for adjustments to integrate newer incoming variants.
| S-EPMC9769947 | biostudies-literature
Project description:The early diagnosis of coronavirus disease 2019 (COVID-19) is dependent on the specific and sensitive detection of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) RNA. Herein, we develop a highly sensitive and specific electrochemical biosensor for SARS-CoV-2 target RNA detection based on the integration of protospacer adjacent motif (PAM)-free cascaded toehold-mediated strand displacement reaction (TSDR) and CRISPR-Cas12a (PfTSDR-CRISPR). In this study, each target is transformed into multiple DNA substrates with bubble structure in the seed region by the cascaded TSDR, which can directly hybridize with guide RNA (gRNA) without PAM requirement and then activate CRISPR-Cas12a's trans-cleavage activity. Subsequently, the hairpin DNA modified with methylene blue (MB-HP) is cleaved by activated CRISPR-Cas12a. Therefore, as MB leaves the electrode surface, a decreased current signal is obtained. With the involvement of PAM-free cascaded TSDRs and CRISPR-Cas12a amplification strategy, the PfTSDR-CRISPR-based electrochemical biosensor achieves the detection of target RNA as low as 40 aM. The biosensor has high sequence specificity, reliability and robustness. Thanks to the PAM-free cascaded TSDR, the biosensor can achieve universal detection of different target RNA without redesigning gRNA sequence of CRISPR-Cas12a. In addition, this biosensor successfully detects SARS-CoV-2 target RNA in complex samples, which highlights its potential for diagnosing COVID-19.
| S-EPMC9833854 | biostudies-literature