Browse
Submit Data
Databases
API
Help

Dataset Information

21 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

A Ruthenium(II) Water Oxidation Catalyst Containing a pH-Responsive Ligand Framework.

ABSTRACT: The synthesis of a new Ru^II-based water oxidation catalyst is presented, in which a nitrophenyl group is introduced into the backbone of dpp via a pH-sensitive imidazole bridge (dpp = 2,9-di-(2'-pyridyl)-1,10-phenanthroline). This modification had a pronounced effect on the photophysical properties and led to the appearance of a significant absorption band around 441 nm in the UV-vis spectrum upon formation of the monoprotonated species under neutral conditions. Theoretical investigations could show that the main contributions to this band arise from transitions involving the imidazole and nitrophenyl motif, allowing us to determine the pK_a value (6.8 ± 0.1) of the corresponding, twofold protonated conjugated acid. In contrast, the influence of the nitrophenyl group on the electrochemical properties of the catalytic center was negligible. Likewise, the catalytic performance of Ru(dppip-NO₂) and its parent complex Ru(dpp) was comparable over the entire investigated pH range (dppip-NO₂ = 2-(4-nitrophenyl)-6,9-di(pyridin-2-yl)-1H-imidazo[4,5-f][1,10]phenanthroline). This allowed the original catalytic properties to be retained while additionally featuring a functionalized ligand scaffold, which provides further modification opportunities as well as the ability to report the pH of the catalytic solution via UV-vis spectroscopy.

SUBMITTER: Huber FL

PROVIDER: S-EPMC8424647 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

A Dinuclear Ruthenium-Based Water Oxidation Catalyst: Use of Non-Innocent Ligand Frameworks for Promoting Multi-Electron Reactions.

Project description:Insight into how H2 O is oxidized to O2 is envisioned to facilitate the rational design of artificial water oxidation catalysts, which is a vital component in solar-to-fuel conversion schemes. Herein, we report on the mechanistic features associated with a dinuclear Ru-based water oxidation catalyst. The catalytic action of the designed Ru complex was studied by the combined use of high-resolution mass spectrometry, electrochemistry, and quantum chemical calculations. Based on the obtained results, it is suggested that the designed ligand scaffold in Ru complex 1 has a non-innocent behavior, in which metal-ligand cooperation is an important part during the four-electron oxidation of H2 O. This feature is vital for the observed catalytic efficiency and highlights that the preparation of catalysts housing non-innocent molecular frameworks could be a general strategy for accessing efficient catalysts for activation of H2 O.

| S-EPMC4517172 | biostudies-literature

Chemical and Photochemical Water Oxidation Mediated by an Efficient Single-Site Ruthenium Catalyst.

Project description:Water oxidation is a fundamental step in artificial photosynthesis for solar fuels production. In this study, we report a single-site Ru-based water oxidation catalyst, housing a dicarboxylate-benzimidazole ligand, that mediates both chemical and light-driven oxidation of water efficiently under neutral conditions. The importance of the incorporation of the negatively charged ligand framework is manifested in the low redox potentials of the developed complex, which allows water oxidation to be driven by the mild one-electron oxidant [Ru(bpy)3 ]3+ (bpy=2,2'-bipyridine). Furthermore, combined experimental and DFT studies provide insight into the mechanistic details of the catalytic cycle.

| S-EPMC6680270 | biostudies-literature

Impact of the Ligand Flexibility and Solvent on the O-O Bond Formation Step in a Highly Active Ruthenium Water Oxidation Catalyst.

Project description:By advanced molecular dynamics simulations, we show that for a highly active ruthenium-based water oxidation catalyst the dangling carboxylate group of the catalyst plays an important role in the crucial O-O bond formation step. The interplay of the flexible group and solvent molecules facilitates two possible pathways: a direct pathway with a single solvent water molecule or a mediated pathway involving two solvent water molecules, which have similar activation barriers. Our results provide an example for which a realistic molecular dynamics approach, incorporating an explicit description of the solvent, is required to reveal the full complexity of an important catalytic reaction in aqueous solvent.

| S-EPMC6220359 | biostudies-literature

Ligand modification transforms a catalase mimic into a water oxidation catalyst.

Project description:The catalytic reactivity of the high-spin Mn(II) pyridinophane complexes [(Py2NR2)Mn(H2O)2](2+) (R=H, Me, tBu) toward O2 formation is reported. With small macrocycle N-substituents (R=H, Me), the complexes catalytically disproportionate H2O2 in aqueous solution; with a bulky substituent (R=tBu), this catalytic reaction is shut down, but the complex becomes active for aqueous electrocatalytic H2O oxidation. Control experiments are in support of a homogeneous molecular catalyst and preliminary mechanistic studies suggest that the catalyst is mononuclear. This ligand-controlled switch in catalytic reactivity has implications for the design of new manganese-based water oxidation catalysts.

| S-EPMC4167389 | biostudies-literature

Electrochemically Identified Ultrathin Water-Oxidation Catalyst in Neutral pH Solution Containing Ni<sup>2+</sup> and Its Combination with Photoelectrode.

Project description:Water oxidation electrocatalyzed by Ni2+ under neutral conditions was investigated using various electrochemical analyses. The addition of Ni2+ in a phosphate-buffered solution catalyzed the oxidation of water, as confirmed by the detection of oxygen generation via scanning electrochemical microscopy. A combination of cyclic voltammetry, coulometric titration, and electrochemical quartz microbalance measurements identified the catalysis as heterogeneous and the catalyst as a Ni-based ultrathin (<4 nm) layer ("Ni-Pi"). Analysis of the potential- and pH-dependency of the titrated amount of charge revealed that the catalyst was deposited only under anodic polarization conditions and was removed under unpolarized conditions; the catalyst may be Ni(III) oxide, and its formation and oxidation appeared to be chemically irreversible. The diffusion-limited nature of water oxidation catalyzed by Ni2+ was closely related to the phosphate ions involved in the catalyst formation and the accompanying catalysis. Although the catalytic performance of Ni2+ alone was not remarkable, it exhibited a synergetic effect with BiVO4 for photoelectrochemical water oxidation, which can compete with Co-Pi-decorated BiVO4.

| S-EPMC6641076 | biostudies-literature

Activation by oxidation and ligand exchange in a molecular manganese vanadium oxide water oxidation catalyst.

Project description:Despite their technological importance for water splitting, the reaction mechanisms of most water oxidation catalysts (WOCs) are poorly understood. This paper combines theoretical and experimental methods to reveal mechanistic insights into the reactivity of the highly active molecular manganese vanadium oxide WOC [Mn4V4O17(OAc)3]3- in aqueous acetonitrile solutions. Using density functional theory together with electrochemistry and IR-spectroscopy, we propose a sequential three-step activation mechanism including a one-electron oxidation of the catalyst from [Mn2 3+Mn2 4+] to [Mn3+Mn3 4+], acetate-to-water ligand exchange, and a second one-electron oxidation from [Mn3+Mn3 4+] to [Mn4 4+]. Analysis of several plausible ligand exchange pathways shows that nucleophilic attack of water molecules along the Jahn-Teller axis of the Mn3+ centers leads to significantly lower activation barriers compared with attack at Mn4+ centers. Deprotonation of one water ligand by the leaving acetate group leads to the formation of the activated species [Mn4V4O17(OAc)2(H2O)(OH)]- featuring one H2O and one OH ligand. Redox potentials based on the computed intermediates are in excellent agreement with electrochemical measurements at various solvent compositions. This intricate interplay between redox chemistry and ligand exchange controls the formation of the catalytically active species. These results provide key reactivity information essential to further study bio-inspired molecular WOCs and solid-state manganese oxide catalysts.

| S-EPMC8513927 | biostudies-literature

Photoinduced hole transfer from tris(bipyridine)ruthenium dye to a high-valent iron-based water oxidation catalyst.

Project description:An efficient water oxidation system is a prerequisite for developing solar energy conversion devices. Using advanced time-resolved spectroscopy, we study the initial catalytic relevant electron transfer events in the light-driven water oxidation system utilizing [Ru(bpy)3]2+ (bpy = 2,2'-bipyridine) as a light harvester, persulfate as a sacrificial electron acceptor, and a high-valent iron clathrochelate complex as a catalyst. Upon irradiation by visible light, the excited state of the ruthenium dye is quenched by persulfate to afford a [Ru(bpy)3]3+/SO4?- pair, showing a cage escape yield up to 75%. This is followed by the subsequent fast hole transfer from [Ru(bpy)3]3+ to the FeIV catalyst to give the long-lived FeV intermediate in aqueous solution. In the presence of excess photosensitizer, this process exhibits pseudo-first order kinetics with respect to the catalyst with a rate constant of 3.2(1) × 1010 s-1. Consequently, efficient hole scavenging activity of the high-valent iron complex is proposed to explain its high catalytic performance for water oxidation.

| S-EPMC6677028 | biostudies-literature

CuAAC-based assembly and characterization of a ruthenium-copper dyad containing a diimine-dioxime ligand framework.

Project description:The design of molecular dyads combining a light-harvesting unit with an electroactive centre is highly demanded in the field of artificial photosynthesis. The versatile Copper-catalyzed Azide-Alkyne Cycloaddition (CuAAC) procedure was employed to assemble a ruthenium tris-diimine unit to an unprecedented azide-substituted copper diimine-dioxime moiety. The resulting RuIICuII dyad 4 was characterized by electrochemistry, 1H NMR, EPR, UV-visible absorption, steady-state fluorescence and transient absorption spectroscopies. Photoinduced electron transfer from the ruthenium to the copper centre upon light-activation in the presence of a sacrificial electron donor was established thanks to EPR-monitored photolysis experiments, opening interesting perspectives for photocatalytic applications.

| S-EPMC5493982 | biostudies-literature

Strong Ligand Stabilization Based on π-Extension in a Series of Ruthenium Terpyridine Water Oxidation Catalysts.

Project description:The substitution behavior of the monodentate Cl ligand of a series of ruthenium(II) terpyridine complexes (terpyridine (tpy)=2,2':6',2''-terpyridine) has been investigated. 1 H NMR kinetic experiments of the dissociation of the chloro ligand in D2 O for the complexes [Ru(tpy)(bpy)Cl]Cl (1, bpy=2,2'-bipyridine) and [Ru(tpy)(dppz)Cl]Cl (2, dppz=dipyrido[3,2-a:2',3'-c]phenazine) as well as the binuclear complex [Ru(bpy)2 (tpphz)Ru(tpy)Cl]Cl3 (3 b, tpphz=tetrapyrido[3,2-a:2',3'-c:3'',2''-h:2''',3'''-j]phenazine) were conducted, showing increased stability of the chloride ligand for compounds 2 and 3 due to the extended π-system. Compounds 1-5 (4=[Ru(tbbpy)2 (tpphz)Ru(tpy)Cl](PF6 )3 , 5=[Ru(bpy)2 (tpphz)Ru(tpy)(C3 H8 OS)/(H2 O)](PF6 )3 , tbbpy=4,4'-di-tert-butyl-2,2'-bipyridine) are tested for their ability to run water oxidation catalysis (WOC) using cerium(IV) as sacrificial oxidant. The WOC experiments suggest that the stability of monodentate (chloride) ligand strongly correlates to catalytic performance, which follows the trend 1>2>5≥3>4. This is also substantiated by quantum chemical calculations, which indicate a stronger binding for the chloride ligand based on the extended π-systems in compounds 2 and 3. Additionally, a theoretical model of the mechanism of the oxygen evolution of compounds 1 and 2 is presented; this suggests no differences in the elementary steps of the catalytic cycle within the bpy to the dppz complex, thus suggesting that differences in the catalytic performance are indeed based on ligand stability. Due to the presence of a photosensitizer and a catalytic unit, binuclear complexes 3 and 4 were tested for photocatalytic water oxidation. The bridging ligand architecture, however, inhibits the effective electron-transfer cascade that would allow photocatalysis to run efficiently. The findings of this study can elucidate critical factors in catalyst design.

| S-EPMC9299156 | biostudies-literature

Electrocatalytic water oxidation by a molecular catalyst incorporated into a metal-organic framework thin film.

Project description:A molecular water oxidation catalyst, [Ru(tpy)(dcbpy)(OH2)](ClO4)2 (tpy = 2,2':6',2''-terpyridine, dcbpy = 2,2'-bipyridine-5,5'-dicarboxylic acid) [1], has been incorporated into FTO-grown thin films of UiO-67 (UiO = University of Oslo), by post-synthetic ligand exchange. Cyclic voltammograms (0.1 M borate buffer at pH = 8.4) of the resulting UiO67-[RuOH2]@FTO show a reversible wave associated with the RuIII/II couple in the anodic scan, followed by a large current response that arises from electrocatalytic water oxidation beyond 1.1 V vs. Ag/AgCl. Water oxidation can be observed at an applied potential of 1.5 V over the timescale of hours with a current density of 11.5 ?A cm-2. Oxygen evolution was quantified in situ over the course of the experiment, and the Faradaic efficiency was calculated as 82%. Importantly, the molecular integrity of [1] during electrocatalytic water oxidation is maintained even on the timescale of hours under turnover conditions and applied voltage, as evidenced by the persistence of the wave associated with the RuIII/II couple in the CV. This experiment highlights the capability of metal organic frameworks like UiO-67 to stabilize the molecular structure of catalysts that are prone to form higher clusters in homogenous phase.

| S-EPMC6095457 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data