Browse
Submit Data
Databases
API
Help

Dataset Information

17 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Understanding the Fundamentals of Microporosity Upgrading in Zeolites: Increasing Diffusion and Catalytic Performances.

ABSTRACT: Hierarchical zeolites are regarded as promising catalysts due to their well-developed porosity, increased accessible surface area, and minimal diffusion constraints. Thus far, the focus has been on the creation of mesopores in zeolites, however, little is known about a microporosity upgrading and its effect on the diffusion and catalytic performance. Here the authors show that the "birth" of mesopore formation in faujasite (FAU) type zeolite starts by removing framework T atoms from the sodalite (SOD) cages followed by propagation throughout the crystals. This is evidenced by following the diffusion of xenon (Xe) in the mesoporous FAU zeolite prepared by unbiased leaching with NH₄ F in comparison to the pristine FAU zeolite. A new diffusion pathway for the Xe in the mesoporous zeolite is proposed. Xenon first penetrates through the opened SOD cages and then diffuses to supercages of the mesoporous zeolite. Density functional theory (DFT) calculations indicate that Xe diffusion between SOD cage and supercage occurs only in hierarchical FAU structure with defect-contained six-member-ring separating these two types of cages. The catalytic performance of the mesoporous FAU zeolite further indicates that the upgraded microporosity facilitates the intracrystalline molecular traffic and increases the catalytic performance.

SUBMITTER: Qin Z

PROVIDER: S-EPMC8425932 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Catalytic Performances of Cu/MCM-22 Zeolites with Different Cu Loadings in NH3-SCR.

Project description:The NH3-SCR activities and hydrothermal stabilities of five xCu/MCM-22 zeolites with different Cu loadings (x = 2-10 wt%) prepared by incipient wetness impregnation method were systematically investigated. The physicochemical properties of xCu/MCM-22 zeolites were analyzed by XRD, nitrogen physisorption, ICP-AES, SEM, NH3-TPD, UV-vis, H2-TPR and XPS experiments. The Cu species existing in xCu/MCM-22 are mainly isolated Cu2+, CuOx and unreducible copper species. The concentrations of both isolated Cu2+ and CuOx species in xCu/MCM-22 increase with Cu contents, but the increment of CuOx species is more distinct, especially in high Cu loadings (>4 wt%). NH3-SCR experimental results demonstrated that the activity of xCu/MCM-22 is sensitive to Cu content at low Cu loadings (≤4 wt%). When the Cu loading exceeds 4 wt%, the NH3-SCR activity of xCu/MCM-22 is irrelevant to Cu content due to the severe pore blockage effects caused by aggregated CuOx species. Among the five xCu/MCM-22 zeolites, 4Cu/MCM-22 with moderate Cu content has the best NH3-SCR performance, which displays higher than 80% NOx conversions in a wide temperature window (160-430 °C). Furthermore, the hydrothermal aging experiments (xCu/MCM-22 was treated at 750 °C for 10 h under 10% water vapor atmosphere) illustrated that all the xCu/MCM-22 zeolites exhibit high hydrothermal stability in NH3-SCR reactions.

| S-EPMC7694057 | biostudies-literature

Ultrasonic-assisted catalytic transfer hydrogenation for upgrading pyrolysis-oil.

Project description:Recent interest in biomass-based fuel blendstocks and chemical compounds has stimulated research efforts on conversion and upgrading pathways, which are considered as critical commercialization drivers. Existing pre-/post-conversion pathways are energy intense (e.g., pyrolysis and hydrogenation) and economically unsustainable, thus, more efficient process solutions can result in supporting the renewable fuels and green chemicals industry. This study proposes a process, including biomass conversion and bio-oil upgrading, using mixed fast and slow pyrolysis conversion pathway, as well as sono-catalytic transfer hydrogenation (SCTH) treatment process. The proposed SCTH treatment employs ammonium formate as a hydrogen transfer additive and palladium supported on carbon as the catalyst. Utilizing SCTH, bio-oil molecular bonds were broken and restructured via the phenomena of cavitation, rarefaction, and hydrogenation, with the resulting product composition, investigated using ultimate analysis and spectroscopy. Additionally, an in-line characterization approach is proposed, using near-infrared spectroscopy, calibrated by multivariate analysis and modeling. The results indicate the potentiality of ultrasonic cavitation, catalytic transfer hydrogenation, and SCTH for incorporating hydrogen into the organic phase of bio-oil. It is concluded that the integration of pyrolysis with SCTH can improve bio-oil for enabling the production of fuel blendstocks and chemical compounds from lignocellulosic biomass.

| S-EPMC7921008 | biostudies-literature

Catalytic Ozonation of Nitrobenzene by Manganese-Based Y Zeolites.

Project description:Catalytic ozonation process (COP) is considered as a cost-efficient technology for the treatment of refractory chemical wastewaters. The catalyst performance plays an important role for the treatment efficiency. The present study investigated efficiencies and mechanisms of manganese (Mn)-based Y zeolites in COPs for removing nitrobenzene from water. The catalysts of Mn/NaY and Mn/USY were prepared by incipient wetness impregnation, while Mn-USY was obtained by hydrothermal synthesis. Mn-USY contained a greater ratio of Mn2+ than Mn/NaY, and Mn/USY. Mn oxides loaded on Y zeolites promoted the COP efficiencies. Mn/NaY increased total organic carbon removal in COP by 7.3% compared to NaY, while Mn/USY and Mn-USY increased 11.5 and 15.8%, respectively, relative to USY in COP. Multivalent Mn oxides (Mn2+, Mn3+, and Mn4+) were highly dispersed on the surface of NaY or USY, and function as catalytic active sites, increasing mineralization. Mn-USY showed the highest total organic carbon removal (44.3%) in COP among the three catalysts, because Mn-USY had a higher ratio of Mn2+ to the total Mn oxides on the surface than Mn/NaY and Mn/USY and the catalytic effects from intercorrelations between Mn oxides and mesoporous surface structures. The hydroxyl radicals and superoxide radicals governed oxidations in COP using Mn-USY. Nitrobenzene was oxidized to polyhydroxy phenol, polyhydroxy nitrophenol, and p-benzoquinone. The intermediates were then oxidized to small organic acids and ultimately carbon dioxide and water. This study demonstrates the potential of Y zeolites used in COP for the treatment of refractory chemical wastewaters.

| S-EPMC7028746 | biostudies-literature

Self-Assembly under Confinement: Nanocorrals for Understanding Fundamentals of 2D Crystallization.

Project description:Nanocorrals with different size, shape, and orientation are created on covalently modified highly oriented pyrolytic graphite surfaces using scanning probe nanolithography, i.e., nanoshaving. Alkylated diacetylene molecules undergo laterally confined supramolecular self-assembly within these corrals. When nanoshaving is performed in situ, at the liquid-solid interface, the orientation of the supramolecular lamellae structure is directionally influenced by the gradual graphite surface exposure. Careful choice of the nanoshaving direction with respect to the substrate symmetry axes promotes alignment of the supramolecular lamellae within the corral. Self-assembly occurring inside corrals of different size and shape reveals the importance of geometric and kinetic constraints controlled by the nanoshaving process. Finally, seed-mediated crystallization studies demonstrate confinement control over nucleation and growth principles.

| S-EPMC5198256 | biostudies-literature

Enhanced toluene adsorption/desorption dynamic performances over modified USY zeolites after an aqueous ammonia treatment.

Project description:The dynamic adsorption/desorption performances of modified hierarchical USY zeolites treated with an ammonia solution (NH4OH) at different concentrations were investigated using gas-phase toluene as an indicator. The characterization results indicated that the ammonia treatment could result in the expansion of microporous channels and the formation of a mesoporous structure without evident decrease in crystallinity. The experiment results regarding dynamic adsorption/desorption performances revealed that the mass transfer resistance of modified USY adsorbents were greatly reduced treating with NH4OH. Among the modified samples, the 0.1 mol L-1 NH4OH treated USY adsorbent exhibited large adsorptive capacity and highest desorption rate, which show good cyclic performance that could preserve its adsorbent capacity after 20 cycles. In contrast, pristine USY samples had lost around 28% of the initial adsorption capacity after 20 cycles. Moreover, the NaOH-treated sample showed great crystallinity decline compared to the NH4OH-treated samples due to excessive silicon atom leaching from the USY framework, and had lower adsorption capacity under humid conditions. Therefore, NH4OH-modified USY zeolites could be promising adsorbents for the adsorption/desorption process of volatile organic compounds (VOCs).

| S-EPMC9041875 | biostudies-literature

Datasets for testing the performances of jump diffusion models.

Project description:This article contains datasets related to the research article titled a novel jump diffusion model based on SGT distribution and its applications ("A novel jump diffusion model based on SGT distribution and its applications" (W.J. Xu, G.F. Liu, H.Y. Li, 2016) [1]). The datasets contain continuous composite daily percentage return values which are computed from the daily closing prices. Firstly, we describe statistical properties of the datasets. Then, the datasets are split into two samples, the in-sample data and out-of-sample data. The datasets can be used as benchmarks for testing the performances of jump diffusion models.

| S-EPMC5144646 | biostudies-literature

Light-Driven Catalytic Upgrading of Butanol in a Biohybrid Photoelectrochemical System.

Project description:This paper reports the design and preparation of a biohybrid photoelectrochemical cell (PEC) that can drive the tandem enzymatic oxidation and aldol condensation of n-butanol (BuOH) to C8 2-ethylhexenal (2-EH). In this work, BuOH was first oxidized to n-butyraldehyde (BA) by the alcohol oxidase enzyme (AOx), concurrently generating hydrogen peroxide (H2O2). To preserve enzyme activity and increase kinetics nearly 2-fold, the H2O2 was removed by oxidation at a bismuth vanadate (BiVO4) photoanode. Organocatalyzed aldol condensation of C4 BA to C8 2-EH improved the overall BuOH conversion to 6.2 ± 0.1% in a biased PEC after 16 h. A purely light-driven, unbiased PEC showed 3.1 ± 0.1% BuOH conversion, or ~50% of that obtained from the biased system. Replacing AOx with the enzyme alcohol dehydrogenase (ADH), which requires the diffusional nicotinamide adenine dinucleotide cofactor (NAD+/NADH), resulted in only 0.2% BuOH conversion due to NAD+ dimerization at the photoanode. Lastly, the application of more positive biases with the biohybrid AOx PEC led to measurable production of H2 at the cathode, but at the cost of lower BA and 2-EH yields due to both product overoxidation and decreased enzyme activity.

| S-EPMC7597823 | biostudies-literature

Catalytic Upgrading in Bacteria-Compatible Conditions via a Biocompatible Aldol Condensation.

Project description:Integrating non-enzymatic chemistry with living systems has the potential to greatly expand the types and yields of chemicals that can be sourced from renewable feedstocks. The in situ conversion of microbial metabolites to higher order products will ensure their continuous generation starting from a given cellular reaction mixture. We present here a systematic study of different organocatalysts that enable aldol condensation in biological media under physiological conditions of neutral pH, moderate temperature, and ambient pressure. The relative toxicities of each catalyst were tested against bacteria, and the catalysts were found to provide good yields of homoaldol products in bacterial cultures containing aldehydes. Lastly, we demonstrate that a biocompatible oil can be used to selectively extract the upgraded products, which enabes facile isolation and decreases the product toxicity to microbes.

| S-EPMC5417690 | biostudies-literature

Catalytic Steam-Assisted Pyrolysis of PET for the Upgrading of TPA.

Project description:Compared with conventional pyrolysis, steam-assisted pyrolysis of polyethylene terephthalate (PET) can effectively eliminate char and upgrade terephthalic acid (TPA). However, during steam-assisted pyrolysis of PET, the degree of cracking still varies greatly, and while some of the product is excessively cracked to gas, the other part is still insufficiently cracked. In addition, these two types of products seriously affect the yield and purity of TPA. To further enhance the TPA, an attempt was made to reduce these impurities simultaneously by synergistic catalysis among the different components of the metal-acid catalyst. Through a series of experiments, Pt@Hzsm-5 was screened as the optimal catalyst. In the catalytic steam-assisted pyrolysis of PET, the optimum reaction temperature decreased to 400 °C, the calculated yield of TPA increased to 98.23 wt%, and the purity increased to 92.2%. The Pt@Hzsm-5 could be recycled three times with no significant decrease in the obtained yield of TPA. The catalytic mechanism of the Pt@Hzsm-5 was investigated through the analysis of the products and isotope tracing experiments. The Pt catalyzed the hydrogen transfer reaction between the water molecules and PET molecules, which inhibited the excessive cracking of TPA by improving the hydrogen transfer efficiency, reduced the generation of gaseous products, and improved the calculated yield of TPA. In contrast, the Hzsm-5 catalyzed the reaction of monovinyl ester cracking to TPA, effectively reducing the impurities in the solid product, increasing the olefin yield, and improving the purity of TPA. This discovery not only clarifies the synergistic catalytic effect of the Pt@Hzsm-5 in the steam-assisted pyrolysis of the PET reaction but also lays the foundation for further screening of other inexpensive metal-acid catalysts. This is of great significance to realize the industrial application of TPA preparation by PET pyrolysis.

| S-EPMC10052107 | biostudies-literature

Upgrading Pyrolytic Oil via Catalytic Co-Pyrolysis of Beechwood and Polystyrene.

Project description:This study aims to investigate the catalytic co-pyrolysis of beech wood with polystyrene as a synergic and catalytic effect on liquid oil production. For this purpose, a tubular semi-continuous reactor under an inert nitrogen atmosphere was used. Several zeolite catalysts were modified via incipient wetness impregnation using iron and/or nickel. The liquid oil recovered was analyzed using GC-MS for the identification of the liquid products, and GC-FID was used for their quantification. The effects of catalyst type, beechwood-to-polystyrene ratio, and operating temperature were investigated. The results showed that the Fe/Ni-ZSM-5 catalyst had the best deoxygenation capability. The derived oil was mainly constituted of aromatics of about 92 wt.% for the 1:1 mixture of beechwood and polystyrene, with a remarkably high heating value of around 39 MJ/kg compared to 18 MJ/kg for beechwood-based bio-oil. The liquid oil experienced a great reduction in oxygen content of about 92% for the polystyrene-beechwood 50-50 mixture in comparison to beechwood alone. The catalytic and synergetic effects were more realized for high beechwood percentages as a 75-25 beechwood-polystyrene mix. Regarding the temperature variation between 450 and 600 °C, the catalyst seemed to deactivate faster at higher temperatures, thus constituting a quality reduction in the pyrolytic oil in high-temperature ranges.

| S-EPMC10420871 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data