Efficient Capture of Heavy Metal Ions and Arsenic with a CaY–Carbonate Layered Double-Hydroxide Nanosheet
Ontology highlight
ABSTRACT:
SUBMITTER: Zahir M
PROVIDER: S-EPMC8427793 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Herein, nickel-aluminum-layered double hydroxide (NiAl-LDH) films were prepared by the hydrothermal method. Based on the photoinduced reduction ability and degradation of LDHs on heavy metal ions and organic compounds, NiAl-LDH films displayed favorable simultaneous removal performance. Benefiting from the electron traps of heavy metals reduced from solution, the coexisting metal ions improved the photocatalytic activity of NiAl-LDH films on methyl orange. The higher the Fermi level of coexisting metal ion was, the higher the photocatalytic degradation rate of methyl orange obtained. Meanwhile, the removal rates of heavy metal ions (Ag+, Pb2+, and Cu2+) from wastewater were both enhanced and could reach 95%. NiAl-LDH films showed affinity toward Ag+. Furthermore, NiAl-LDH films are tightly coupled with the substrate, providing active sites and a simple method for the catalyst recovery. This study provides new insights into the simultaneous removal of heavy metal ions and organic pollutants using LDH films.
| S-EPMC7469369 | biostudies-literature
Project description:The removal of highly toxic, ultra-dilute contaminants of concern has been a primary challenge for clean water technologies. Chromium and arsenic are among the most prevalent heavy metal pollutants in urban and agricultural waters, with current separation processes having severe limitations due to lack of molecular selectivity. Here, we report redox-active metallopolymer electrodes for the selective electrochemical removal of chromium and arsenic. An uptake greater than 100?mg Cr/g adsorbent can be achieved electrochemically, with a 99% reversible working capacity, with the bound chromium ions released in the less harmful trivalent form. Furthermore, we study the metallopolymer response during electrochemical modulation by in situ transmission electron microscopy. The underlying mechanisms for molecular selectivity are investigated through electronic structure calculations, indicating a strong charge transfer to the heavy metal oxyanions. Finally, chromium and arsenic are remediated efficiently at concentrations as low as 100 ppb, in the presence of over 200-fold excess competing salts.
| S-EPMC6224381 | biostudies-literature
Project description:It is of great urgency to develop efficient, cost-effective, stable and industrially applicable electrocatalysts for renewable energy systems. But there are still few candidate materials. Here we show a bifunctional electrocatalyst, comprising graphdiyne-exfoliated and -sandwiched iron/cobalt layered double-hydroxide nanosheet arrays grown on nickel foam, for the oxygen and hydrogen evolution reactions. Theoretical and experimental data revealed that the charge transport kinetics of the structure were superior to iron/cobalt layered double-hydroxide, a prerequisite for improved electrocatalytic performance. The incorporation with graphdiyne increased the number of catalytically active sites and prevented corrosion, leading to greatly enhanced electrocatalytic activity and stability for oxygen evolution reaction, hydrogen evolution reaction, as well as overall water splitting. Our results suggest that the use of graphdiyne might open up new pathways for the design and fabrication of earth-abundant, efficient, functional, and smart electrode materials with practical applications.
| S-EPMC6294247 | biostudies-literature
Project description:Herein, magnesium/aluminum-layered double hydroxide (MgAl-LDH) and bentonite (BT) nanocomposites (LDH-BT) were prepared by co-precipitation (CP), exfoliation-reassembly (ER), and simple solid-phase hybridization (SP). The prepared LDH-BT nanocomposites were preliminarily characterized by using powder X-ray diffractometry, scanning electron microscopy, and zeta-potentiometry. The chromate adsorption efficacies of the pristine materials (LDH and bentonite) and the as-prepared nanocomposites were investigated. Among the composites, the LDH-BT_SP was found to exhibit the highest chromate removal efficiency of 65.7%. The effect of varying the LDH amount in the LDH-BT composite was further investigated, and a positive relationship between the LDH ratio and chromate removal efficiency was identified. The chromate adsorption by the LDH-BT_SP was performed under various concentrations (isotherm) and contact times (kinetic). The results of the isotherm experiments were well fitted with the Langmuir and Freundlich isotherm model and demonstrate multilayer chromate adsorption by the heterogeneous LDH-BT_SP, with a homogenous distribution of LDH nanoparticles. The mobility of the as-prepared LDH-BT_SP was investigated on a silica sand-filled column to demonstrate that the mobility of the bentonite is dramatically decreased after hybridization with LDH. Furthermore, when the LDH-BT_SP was injected into a box container filled with silica sand to simulate subsurface soil conditions, the chromate removal efficacy was around 43% in 170 min. Thus, it was confirmed that the LDH-BT prepared by solid-phase hybridization is a practical clay-based nanocomposite for in situ soil and groundwater remediation.
| S-EPMC9025721 | biostudies-literature
Project description:Electrochromic smart windows have attracted great attention due to their dynamic regulation of the solar spectrum. NiO and MnO2 are typical anodic coloration materials and widely investigated as complementary electrodes with WO3. However, NiO and MnO2 films often cannot be bleached to complete transparency, resulting in low transmittances and low optical modulations in the short-wavelength visible region. Herein, we report a porous nickel manganese layered double hydroxide (NiMn-LDH) nanosheet film directly grown on fluorine-doped tin oxide (FTO) glass using a one-step hydrothermal method, which demonstrates a high transmittance of 80.1% at 550 nm (without deduction of FTO glass). Induced by the double-redox couples of Ni2+/Ni3+ and Mn3+/Mn4+ associated synergistic electrochromic effect, the as-grown NiMn-LDH film electrode exhibits a large optical modulation of 68.5% at 550 nm, and a large solar irradiation modulation of 59.0% in the visible region of 400-800 nm. After annealing at 450 °C for 2 h, the NiMn-LDH film can be transformed into Ni6MnO8 film with a reduced optical modulation of 30.0% at 550 nm. Furthermore, the NiMn-LDH film electrode delivers an areal capacitance of 30.8 mF cm-2 at a current density of 0.1 mA cm-2. These results suggest that the as-prepared NiMn-LDH film electrode is a promising candidate for both electrochromic and energy storage applications.
| S-EPMC10975259 | biostudies-literature
Project description:We herein report the construction of a novel azo-linked conjugated microporous polymers (Ag@AzoTPE-CMP), which possesses permanent porous structure and Ag+ loading up of 7.62% in the skeleton as effective sorption sites. Ag@AzoTPE-CMP shows considerable adsorption capacity of iodine of 202 wt% in iodine vapor at 350 K. In addition, Ag@AzoTPE-CMP can effectively remove heavy ions from ethanol-water solution.
| S-EPMC6145922 | biostudies-literature
Project description:Developing cost-effective and highly efficient oxygen evolution reaction (OER) electrocatalysts is vital for the production of clean hydrogen by electrocatalytic water splitting. Here, three dimensional nickel-iron layered double hydroxide (NiFe LDH) nanosheet arrays are in-situ fabricated on self-supporting nitrogen doped graphited foam (NGF) via a one-step hydrothermal process under an optimized amount of urea. The as prepared NiFe LDH/NGF electrode exhibits a remarkable activity toward OER with a low onset overpotential of 233 mV and a Tafel slope of 59.4 mV dec-1 as well as a long-term durability. Such good performance is attributed to the synergy among the doping effect, the binder-free characteristic, and the architecture of the nanosheet array.
| S-EPMC6652109 | biostudies-literature
Project description:Graphene-based hybrid composites as positive electrodes have aroused great interest in the field of hybrid supercapacitors. However, the charge storage capability of hybrid composites suffers from the scarce interaction between their end members to some extent. Herein, a hybrid composite with electrostatic interaction was obtained by employing a heterogeneous assembly strategy of Ni-Co layered double hydroxide (LDH) and sulfonated graphene nanosheets (SGN). Depending on the substitution of the negatively charged SGN for the interlayer nitrate anions compensating for the positively charged LDH host slabs, the abundance of Ni3+ on the surface of the hybrid composite could be increased to intensify the electrostatic interaction within hybrid composites. As expected, the effective coupling of LDH with SGN ensured the uniform incorporation of heterogeneous components. The unique structure of the hybrid composite accelerated electron transfer and ion diffusion processes during electrochemical reactions, which is beneficial to improve the electrochemical performance of battery-type electrodes. Further evaluation showed that the specific capacity of the LDH/SGN hybrid composite is 1177 C g-1 (2354 F g-1) at 1 A g-1. Additionally, the LDH/SGN//AC hybrid supercapacitor achieved an energy density of 43 W h kg-1 at 800 W kg-1 and still retained 94% of its initial specific capacitance over 10 000 cycles. The boosting effect of the electrostatic interaction within the hybrid composite on electrochemical properties offers a novel pathway for the development of supercapacitors.
| S-EPMC9419522 | biostudies-literature
Project description:The performance of transition metal hydroxides, as cocatalysts for CO2 photoreduction, is significantly limited by their inherent weaknesses of poor conductivity and stacked structure. Herein, we report the rational assembly of a series of transition metal hydroxides on graphene to act as a cocatalyst ensemble for efficient CO2 photoreduction. In particular, with the Ru-dye as visible light photosensitizer, hierarchical Ni(OH)2 nanosheet arrays-graphene (Ni(OH)2-GR) composites exhibit superior photoactivity and selectivity, which remarkably surpass other counterparts and most of analogous hybrid photocatalyst system. The origin of such superior performance of Ni(OH)2-GR is attributed to its appropriate synergy on the enhanced adsorption of CO2, increased active sites for CO2 reduction and improved charge carriers separation/transfer. This work is anticipated to spur rationally designing efficient earth-abundant transition metal hydroxides-based cocatalysts on graphene and other two-dimension platforms for artificial reduction of CO2 to solar chemicals and fuels.
| S-EPMC7560743 | biostudies-literature
Project description:Exposure to toxic metals triggers unique responses from the rat gut microbiota
| PRJEB22938 | ENA