Browse
Submit Data
Databases
API
Help

Dataset Information

15 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Global process-based characterization factors of soil carbon depletion for life cycle impact assessment.

ABSTRACT: Regionalization of land use (LU) impact in life cycle assessment (LCA) has gained relevance in recent years. Most regionalized models are statistical, using highly aggregated spatial units and LU classes (e.g. one unique LU class for cropland). Process-based modelling is a powerful characterization tool but so far has never been applied globally for all LU classes. Here, we propose a new set of spatially detailed characterization factors (CFs) for soil organic carbon (SOC) depletion. We used SOC dynamic curves and attainable SOC stocks from a process-based model for more than 17,000 world regions and 81 LU classes. Those classes include 63 agricultural (depending on 4 types of management/production), and 16 forest sub-classes, and 1 grassland and 1 urban class. We matched the CFs to LU elementary flows used by LCA databases at country-level. Results show that CFs are highly dependent on the LU sub-class and management practices. For example, transformation into cropland in general leads to the highest SOC depletion but SOC gains are possible with specific crops.

SUBMITTER: Teixeira RFM

PROVIDER: S-EPMC8429584 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Integrated life-cycle assessment of electricity-supply scenarios confirms global environmental benefit of low-carbon technologies.

Project description:Decarbonization of electricity generation can support climate-change mitigation and presents an opportunity to address pollution resulting from fossil-fuel combustion. Generally, renewable technologies require higher initial investments in infrastructure than fossil-based power systems. To assess the tradeoffs of increased up-front emissions and reduced operational emissions, we present, to our knowledge, the first global, integrated life-cycle assessment (LCA) of long-term, wide-scale implementation of electricity generation from renewable sources (i.e., photovoltaic and solar thermal, wind, and hydropower) and of carbon dioxide capture and storage for fossil power generation. We compare emissions causing particulate matter exposure, freshwater ecotoxicity, freshwater eutrophication, and climate change for the climate-change-mitigation (BLUE Map) and business-as-usual (Baseline) scenarios of the International Energy Agency up to 2050. We use a vintage stock model to conduct an LCA of newly installed capacity year-by-year for each region, thus accounting for changes in the energy mix used to manufacture future power plants. Under the Baseline scenario, emissions of air and water pollutants more than double whereas the low-carbon technologies introduced in the BLUE Map scenario allow a doubling of electricity supply while stabilizing or even reducing pollution. Material requirements per unit generation for low-carbon technologies can be higher than for conventional fossil generation: 11-40 times more copper for photovoltaic systems and 6-14 times more iron for wind power plants. However, only two years of current global copper and one year of iron production will suffice to build a low-carbon energy system capable of supplying the world's electricity needs in 2050.

| S-EPMC4443343 | biostudies-literature

Handling uncertainties inherited in life cycle inventory and life cycle impact assessment method for improved life cycle assessment of wastewater sludge treatment.

Project description:Life cycle assessment (LCA) has been used to evaluate environmental impacts of products or processes including wastewater treatment. Uncertainty has not received adequate attention in LCA studies. Uncertainty inherited in LCA steps such as the life cycle inventory (LCI) or the life cycle impact assessment (LCIA) method use is unavoidable, but it affects LCA outcomes and associated decision-making. The objective of this paper was to show the impact of uncertainty from LCI and LCIA method on LCA outcomes by using a case study base approach on wastewater sludge treatment processes. A qualitative analysis included setting criteria about what data to be included in LCI, characterization of data, differentiating between major and minor contributors in LCI modeling, evaluation of data quality indicators, setting achievable alternative scenarios, and selecting proper LCIA method were used, in addition to quantitative analysis included assigning most appropriate values for data gaps and proper distribution, and conducting probabilistic analysis to evaluate overall uncertainty. This research used a full-scale wastewater treatment plant in Missouri, USA for case study in which multiple hearth incineration (MHI) is the existing process, while fluid bed incineration (FBI) and anaerobic digestion (AD) were proposed as the alternatives. Using ReCipe method, the study revealed that variation in LCA results of MHI is 63.4% for a single end-point score of 57.9 mPt. On the two alternative processes, it is 54.6% probable that FBI would have more environmental impact than AD. The case study showed that the proposed steps were able to address issues of data uncertainty. Due to differences in characterization, normalization, and weighting factors, different LCIA methods may point out different conclusions and need to be addressed in evaluation.

| S-EPMC6895703 | biostudies-literature

Temperature-Pressure Swing Process for Reactive Carbon Capture and Conversion to Methanol: Techno-Economic Analysis and Life Cycle Assessment.

Project description:A model was developed to conduct techno-economic analysis (TEA) and life cycle assessment (LCA) for reactive carbon capture (RCC) and conversion of carbon dioxide (CO2) to methanol. This RCC process is compared to a baseline commercialized flue gas CO2 hydrogenation process. An ASPEN model was combined with existing TEA and LCA models into a larger TEA/LCA framework in Python. From preliminary experimental data, the model found a levelized cost of $0.79/kg methanol for the baseline process and $0.99/kg for the RCC process. The cradle-to-gate carbon intensity of the baseline process was 0.50 kg-CO2e/kg-methanol, compared to 0.55 kg-CO2e/kg-methanol for the RCC process. However, water consumption for RCC (10.21 kg-H2O/kg-methanol) is greatly reduced compared to the baseline (12.89 kg-H2O/kg-methanol). Future improvements in hydrogen electrolysis costs will benefit the RCC. A target H2/methanol mass ratio of 0.26 was developed for RCC laboratory experiments to reduce methanol cost below the baseline. If a ratio of 0.24 can be achieved, a levelized cost of $0.76/kg methanol is projected, with a carbon intensity of 0.42 kg-CO2e/kg-methanol.

| S-EPMC11308513 | biostudies-literature

Perovskite Photovoltaic Modules: Life Cycle Assessment of Pre-industrial Production Process.

Project description:Photovoltaic devices based on perovskite materials have a great potential to become an exceptional source of energy while preserving the environment. However, to enter the global market, they require further development to achieve the necessary performance requirements. The environmental performance of a pre-industrial process of production of a large-area carbon stack perovskite module is analyzed in this work through life cycle assessment (LCA). From the pre-industrial process an ideal process is simulated to establish a benchmark for pre-industrial and laboratory-scale processes. Perovskite is shown to be the most harmful layer of the carbon stack module because of the energy consumed in the preparation and annealing of the precursor solution, and not because of its Pb content. This work stresses the necessity of decreasing energy consumption during module preparation as the most effective way to reduce environmental impacts of perovskite solar cells.

| S-EPMC6286418 | biostudies-literature

Economic Process Evaluation and Environmental Life-Cycle Assessment of Bio-Aromatics Production.

Project description:The bio-based production of aromatics is experiencing a renaissance with systems and synthetic biology approaches promising to deliver bio-catalysts that will reach yields, rates, and titers comparable to already existing bulk bio-processes for the production of amino acids for instance. However, aromatic building blocks derived from petrochemical routes have a huge economic advantage, they are cheap, and very cheap in fact. In this article, we are trying to shed light on an important aspect of biocatalyst development that is frequently overlooked when working on strain development: economic and environmental impact of the production process. We estimate the production cost and environmental impact of a microbial fermentation process depending on culture pH, carbon source and process scale. As a model molecule we use para-hydroxybenzoic acid (pHBA), but the results are readily transferrable to other shikimate derived aromatics with similar carbon yields and production rates.

| S-EPMC7237583 | biostudies-literature

Life cycle impact assessment of metal production industries in Australia.

Project description:Metal production industries are associated with positive economic benefits, however their activities are significantly resource and energy intensive, contributing to emission of pollutants and greenhouse gases to the environment. The balance between the economic inputs and environmental footprint of the metal production industries determines their contribution to sustainability. This work provides environmental impact assessment of the production of aluminium, copper, gold, iron and steel, lead, nickel and zinc, and considers their contribution to the economy. The emissions of selected representative industries in Australia were sourced from public national emission inventories and used as input parameters in the openLCA software. ReCiPe midpoint and endpoint hierarchist impact assessment methods were used to investigate the environmental impacts of the selected industries. The results indicate that lead, followed by aluminium and nickel production had the largest environmental impacts. The work further revealed the specific emissions for better control for each industry taking into consideration their relative environmental and economic impacts. For instance, adoption of renewable energy sources would significantly decrease the greenhouse gas emissions and the associated environmental impacts of the copper, zinc, gold, and iron and steel production industries. Improvement of sustainability of the production of lead would require further control of trace metal emissions, while for aluminium and nickel production, improved control of emissions of particles and the acidic gases SO2 and NOx.

| S-EPMC8115058 | biostudies-literature

Life Cycle Assessment and Multiobjective Optimization for Steam Cracking Process in Ethylene Plant

Project description:With energy savings

| S-EPMC9096952 | biostudies-literature

Integrating human indoor air pollutant exposure within Life Cycle Impact Assessment.

Project description:Neglecting health effects from indoor pollutant emissions and exposure, as currently done in Life Cycle Assessment (LCA), may result in product or process optimizations at the expense of workers' or consumers' health. To close this gap, methods for considering indoor exposure to chemicals are needed to complement the methods for outdoor human exposure assessment already in use. This paper summarizes the work of an international expert group on the integration of human indoor and outdoor exposure in LCA, within the UNEP/ SETAC Life Cycle Initiative. A new methodological framework is proposed for a general procedure to include human-health effects from indoor exposure in LCA. Exposure models from occupational hygiene and household indoor air quality studies and practices are critically reviewed and recommendations are provided on the appropriateness of various model alternatives in the context of LCA. A single-compartment box model is recommended for use as a default in LCA, enabling one to screen occupational and household exposures consistent with the existing models to assess outdoor emission in a multimedia environment. An initial set of model parameter values was collected. The comparison between indoor and outdoor human exposure per unit of emission shows that for many pollutants, intake per unit of indoor emission may be several orders of magnitude higher than for outdoor emissions. It is concluded that indoor exposure should be routinely addressed within LCA.

| S-EPMC2659811 | biostudies-other

Life Cycle Assessment for Proton Conducting Ceramics Synthesized by the Sol-Gel Process.

Project description:In this report, the environmental aspects of producing proton conducting ceramics are investigated by means of the environmental Life Cycle Assessment (LCA) method. The proton conducting ceramics BaZr0.8Y0.2O3-δ (BZY), BaCe0.9Y0.1O2.95 (BCY10), and Sr(Ce0.9Zr0.1)0.95Yb0.05O3-δ (SCZY) were prepared by the sol-gel process. Their material requirements and environmental emissions were inventoried, and their energy requirements were determined, based on actual production data. This latter point makes the present LCA especially worthy of attention as a preliminary indication of future environmental impact. The analysis was performed according to the recommendations of ISO norms 14040 and obtained using the Gabi 6 software. The performance of the analyzed samples was also compared with each other. The LCA results for these proton conducting ceramics production processes indicated that the marine aquatic ecotoxicity potential (MAETP) made up the largest part, followed by fresh-water aquatic ecotoxicity potential (FAETP) and Human Toxicity Potential (HTP). The largest contribution was from energy consumption during annealing and calcinations steps.

| S-EPMC5456149 | biostudies-other

Life Cycle Inventory and Assessment Datasets on the Operational Sustainability of the Ammonia Process.

Project description:This article presents data affiliated with life cycle inventories, environmental impact and operational sustainability used in, the influence of raw material availability and utility power consumption on the sustainability of the ammonia process [1]. Scenario specific operating conditions were used to simulate the ammonia process based on unique constraints occurring within the Trinidad and Tobago energy sector. The data was collected using AspenⓇ Plus simulations and validated against plant operating data. The data consists of an economic cost evaluation as well as environmental impact using the CML-IA Baseline midpoint approach. The data was derived from life cycle inventories aligned to input/output material and energy flows within the ammonia process as well as life cycle assessment databases utilizing Ecoinvent v3.4. The data can be applied to the wider ammonia supply chain, aiding in achieving greater sustainable development within ammonia-based process industries.

| S-EPMC7200865 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data