Browse
Submit Data
Databases
API
Help

Dataset Information

19 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Sawmill waste derived carbon dots as a fluorescent probe for synthetic dyes in soft drinks.

ABSTRACT: Herein, for the first time the carbon dots (CDs) were synthesized by reflux method from sawmill waste material. We also represent a novel strategy based on fluorescent CDs for determination of ponceau 4R and allura red dyes in soft drinks. Interestingly, both the dyes were sensitive and showed effective fluorescence quenching of the CDs owing to the interaction between them. The analytical applicability of CDs were evaluated for detection of both the dyes with a good linear relationship between the concentration range of 0.0 to 3.0 µg mL^-1 and having detection limit 0.45 and 0.47 µg mL^-1 for allura red and ponceau 4R dyes respectively. Meanwhile, the potential application of this novel fluorescent probe for dyes determination in real samples was validated in different soft drink samples with good accuracy and precision. Thus, these findings provides new insights for the potential risk assessment of both the dyes. Moreover, CDs acted as an excellent fluorescent material in cellular imaging owing to their cellular uptake and localization.

SUBMITTER: Gunjal DB

PROVIDER: S-EPMC8429643 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Fluorescent Carbon Dots Derived from Vehicle Exhaust Soot and Sensing of Tartrazine in Soft Drinks.

Project description:Recycling of waste into valuable products plays a significant role in sustainable development. Herein, we report the conversion of vehicle exhaust waste soot into water-soluble fluorescent carbon dots via a simple acid refluxion method. The obtained carbon dots were characterized using microscopic and spectroscopic techniques. Microscopic techniques reveal that the prepared carbon material is spherical in shape with an average particle size of ?4 nm. Spectroscopic studies exhibited that the carbon dots are emissive in nature, and the emission is excitation-dependent. Further, the prepared carbon dots were successfully utilized as a fluorescent probe for the detection of tartrazine with a limit of detection of 26 nM. The sensitivity of carbon dots has also been realized by the detection of trace amounts of tartrazine in commercial soft drinks. Overall, this work demonstrates the conversion air pollutant soot into value-added fluorescent nanomaterials toward sensing applications.

| S-EPMC7114606 | biostudies-literature

Highly Fluorescent Green Carbon Dots as a Fluorescent Probe for Detecting Mineral Water pH.

Project description:In this report, high-brightness green carbon dots were successfully prepared using 3,5-diaminobenzoic acid as the sole precursor and synthesized in one step using a solvothermal strategy. Under the excitation of 365 nm ultraviolet light, the quantum yield of carbon dots is as high as 53.8%. Experiments revealed that the carbon dots are highly carbonized and the surface is rich in amino and carboxyl groups. The synthesized carbon dots have good water solubility, and are resistant to ions and temperature. The fluorescence intensity of CDs is sensitive to pH changes and is linearly correlated with the pH in the near-neutral range (pH = 6.0 to 9.0). Our experiments showed that carbon dots were sensitive and accurate fluorescent probes for measuring the pH value of drinking water, which could provide an effective method for measuring the pH value of water in the future.

| S-EPMC6749429 | biostudies-literature

Subgram-Scale Synthesis of Biomass Waste-Derived Fluorescent Carbon Dots in Subcritical Water for Bioimaging, Sensing, and Solid-State Patterning.

Project description:Fluorescent carbon dots (FCDs) have received considerable attention because of the great potential for a wide range of applications, from bioimaging to optoelectronic devices. In this work, we reported the synthesis of nitrogen-doped FCDs with an average size of 2 nm in a subcritical water apparatus by using biomass waste (i.e., expired milk) as the precursor. The obtained FCDs were highly dispersed in aqueous solution because of the presence of O-containing functional groups on their surfaces. Under the excitation of ultraviolet and blue light, the FCDs exhibited excitation wavelength-dependent fluorescence in the emission range of 400-550 nm. The FCDs could be easily taken up by HeLa cells without additional surface functionalization, serving as fluorescent nanoprobes for bioimaging. The applications of FCDs as sensing agents for the detection of Fe3+, solid-state fluorescent patterning, and transparent hybrid films were also performed, demonstrating their potential for solid-state fluorescent sensing, security labeling, and wearable optoelectronics.

| S-EPMC6217608 | biostudies-literature

A ratiometric fluorescent probe for pH detection based on Ag<sub>2</sub>S quantum dots-carbon dots nanohybrids.

Project description:In this study, a novel ratiometric fluorescent nanoprobe for pH monitoring has been developed by synthesizing red fluorescent Ag2S quantum dots (Ag2S QDs) and green fluorescent carbon dots (CDs) nanohybrids (Ag2S CDs) in one pot using CDs as templates. The nanoprobe exhibits dual-emission peaks at 500 and 670 nm under a single-excitation wavelength of 450 nm. The red fluorescence can be selectively quenched by increasing pH, while the green fluorescence is an internal reference. Therefore, the change of the relative fluorescence intensity (I500/I670) in the ratiometric Ag2S CDs probes can be used for pH sensing. The results revealed that I500/I670 of Ag2S CDs probes was linearly related to pH variation between pH 5.4 and 6.8. Meanwhile, the Ag2S CDs probes possessed a good reversibility along with pH changing between 5.0 and 7.0 without any interruption from common metal ions, proteins and other interferences.

| S-EPMC7428231 | biostudies-literature

Full-color fluorescent carbon quantum dots.

Project description:Quantum dots have innate advantages as the key component of optoelectronic devices. For white light-emitting diodes (WLEDs), the modulation of the spectrum and color of the device often involves various quantum dots of different emission wavelengths. Here, we fabricate a series of carbon quantum dots (CQDs) through a scalable acid reagent engineering strategy. The growing electron-withdrawing groups on the surface of CQDs that originated from acid reagents boost their photoluminescence wavelength red shift and raise their particle sizes, elucidating the quantum size effect. These CQDs emit bright and remarkably stable full-color fluorescence ranging from blue to red light and even white light. Full-color emissive polymer films and all types of high-color rendering index WLEDs are synthesized by mixing multiple kinds of CQDs in appropriate ratios. The universal electron-donating/withdrawing group engineering approach for synthesizing tunable emissive CQDs will facilitate the progress of carbon-based luminescent materials for manufacturing forward-looking films and devices.

| S-EPMC7852397 | biostudies-literature

Nitrogen-Doped Carbon Dots from Averrhoa carambola Fruit Extract as a Fluorescent Probe for Methyl Orange.

Project description:In this study, a simple and green hydrothermal treatment was performed to prepare nitrogen-doped carbon dots (NCDs) from Averrhoa carambola (AC) fruit extract as a carbon precursor and L-arginine (Arg) as a nitrogen dopant. The AC-NCDs were characterized by UV light, fluorescence spectroscopy, transmission electron microscopy, FTIR spectroscopy, Raman spectroscopy, UV-vis spectroscopy, and zeta potential analyzer. The AC-NCDs were spherical and the average diameter was estimated to be 6.67 nm. The AC-NCDs exhibited the maximum emission intensity at 446 nm with 360 nm excitation wavelength. The fluorescence quenching behavior of AC-NCDs after interacting with methyl orange (MO) dye was studied. The interaction of AC-NCDs and MO was achieved within 3 min and the fluorescence quenching was maintained to a fixed value even after 30 min. The linearity was obtained in the range of 1 to 25 ?M MO with a 0.30 ?M detection limit. Furthermore, the pH values affected the quenching behavior of the AC-NCDs/MO system where the interaction mechanisms were driven by the electrostatic interaction, ?-? interaction, inner filter effect, and energy transfer. The pH 5 maintained higher quenching efficiency while other pH values slightly decreased the quenching efficiency. Incoming applications, the AC-NCDs can be used in various important fields, especially for environmental protection.

| S-EPMC6891795 | biostudies-literature

Functionalized Chitosan-Carbon Dots: A Fluorescent Probe for Detecting Trace Amount of Water in Organic Solvents.

Project description:A novel nanoprobe was designed and synthesized by functionalizing chitosan-carbon dots (CDs) with a modified bipyridine-based heterocyclic molecule, 4-(pyridine-2-yl)-3H-pyrrolo[2,3-c]quinoline (PPQ), to detect trace amount of water via fluorescence methods. The functionalized CDs (PPQ-CDs) were thoroughly characterized using dynamic light scattering, UV-vis, X-ray diffraction, Fourier transform infrared, X-ray photoelectron spectroscopy, high-resolution transmission electron microscopy, and NMR techniques. The modified fluorescence intensity of PPQ-CDs was found to be an excellent indicator for water in organic solvents. The PPQ-CDs showed very weak fluorescence intensity in organic solvents due to a possible photoinduced electron transfer (PET) process between PPQ pyrrole nitrogen and acceptor groups of CDs. However, sequential addition of trace amount of water led to continuous enhancement in the fluorescence intensity for the PPQ-CD nanocomposites. The mechanism was proposed to follow suppression of the PET process due to the formation of "free-ions" by the proton transfer from the CD carboxyl group to pyrrole nitrogen through water bridging. The limit of water detection was determined to be 0.023% (v/v) in DMSO.

| S-EPMC6648781 | biostudies-literature

Carbon dots with molecular fluorescence and their application as a "turn-off" fluorescent probe for ferricyanide detection.

Project description:Highly fluorescent carbon dots (CDs) exhibiting molecular fluorescence were synthesized and successfully used for sensing ferricyanide based on fluorescence quenching. We conducted dialysis to purify the CDs and found that the dialysate is also fluorescent. From the mass spectra and quantum yield analyses of the dialysate, it is demonstrated that molecular fluorophores were also synthesized during the synthesis of CDs. By the comparison of fluorescence spectra between CDs and dialysate, it is established that the fluorescence emission of CDs partly originates from fluorophores that are attached to CDs' surface. The fluorescence quenching caused by ferricyanide is proved to be the overlap of absorption spectra between ferricyanide and CDs. The changes of the absorbance and fluorescence spectra are combined to enhance the detection sensitivity, and the limit of detection is calculated to be 1.7 μM. A good linear response of fluorescence-absorbance combined sensing toward ferricyanide is achieved in the range of 5-100 µM. This method is highly selective to ferricyanide among other common cations and anions, and it is also successfully applied in detecting ferricyanide in real water samples.

| S-EPMC6656716 | biostudies-literature

Colorimetric and Fluorescent Sensing of Copper Ions in Water through o-Phenylenediamine-Derived Carbon Dots.

Project description:Fluorescent nitrogen and sulfur co-doped carbon dots (NSCDs) were synthesized using a simple one-step hydrothermal method starting from o-phenylenediamine (OPD) and ammonium sulfide. The prepared NSCDs presented a selective dual optical response to Cu(II) in water through the arising of an absorption band at 660 nm and simultaneous fluorescence enhancement at 564 nm. The first effect was attributed to formation of cuprammonium complexes through coordination with amino functional groups of NSCDs. Alternatively, fluorescence enhancement can be explained by the oxidation of residual OPD bound to NSCDs. Both absorbance and fluorescence showed a linear increase with an increase of Cu(II) concentration in the range 1-100 µM, with the lowest detection limit of 100 nM and 1 µM, respectively. NSCDs were successfully incorporated in a hydrogel agarose matrix for easier handling and application to sensing. The formation of cuprammonium complexes was strongly hampered in an agarose matrix while oxidation of OPD was still effective. As a result, color variations could be perceived both under white light and UV light for concentrations as low as 10 µM. Since these color changes were similarly perceived in tap and lake water samples, the present method could be a promising candidate for simple, cost-effective visual monitoring of copper onsite.

| S-EPMC10056730 | biostudies-literature

Intracellular ratiometric temperature sensing using fluorescent carbon dots.

Project description:Highly sensitive non-invasive temperature sensing is critical for studying fundamental biological processes and applications in medical diagnostics. Nanoscale-based thermometers are promising non-invasive probes for precise temperature sensing with subcellular resolution. However, many of these systems have limitations as they rely on fluorescence intensity changes, deconvolution of peaks, or the use of hybrid systems to measure thermal events. To address this, we developed a fluorescence-based ratiometric temperature sensing approach using carbon dots prepared via microwave synthesis. These dots possess dual fluorescence signatures in the blue and red regions of the spectrum. We observed a linear response as a function of temperature in the range of 5-60 °C with a thermal resolution of 0.048 K-1 and thermal sensitivity of 1.97% C-1. Temperature-dependent fluorescence was also observed in HeLa cancer cells over a range of 32-42 °C by monitoring changes in the red-to-blue fluorescence signatures. We demonstrate that the ratiometric approach is superior to intensity-based thermal sensing because it is independent of the intracellular concentration of the optical probe. These findings suggest that dual-emitting carbon dots can be an effective tool for in vitro and possibly in vivo fluorescence nanothermometry.

| S-EPMC9473198 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data