Browse
Submit Data
Databases
API
Help

Dataset Information

23 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

A tunable ferroelectric based unreleased RF resonator.

ABSTRACT: This paper introduces the first tunable ferroelectric capacitor (FeCAP)-based unreleased RF MEMS resonator, integrated seamlessly in Texas Instruments' 130 nm Ferroelectric RAM (FeRAM) technology. The designs presented here are monolithically integrated in solid-state CMOS technology, with no post-processing or release step typical of other MEMS devices. An array of FeCAPs in this complementary metal-oxide-semiconductor (CMOS) technology's back-end-of-line (BEOL) process were used to define the acoustic resonance cavity as well as the electromechanical transducers. To achieve high quality factor (Q) of the resonator, acoustic waveguiding for vertical confinement within the CMOS stack is studied and optimized. Additional design considerations are discussed to obtain lateral confinement and suppression of spurious modes. An FeCAP resonator is demonstrated with fundamental resonance at 703 MHz and Q of 1012. This gives a frequency-quality factor product f⋅Q=7.11×1011 which is 1.6× higher than the most state-of-the-art Pb(Zr,Ti)O₃ (PZT) resonators. Due to the ferroelectric characteristics of the FeCAPs, transduction of the resonator can be switched on and off by adjusting the electric polarization. In this case, the resonance can be turned off completely at ±0.3 V corresponding to the coercive voltage of the constituent FeCAP transducers. These novel switchable resonators may have promising applications in on-chip timing, ad-hoc radio front ends, and chip-scale sensors.

SUBMITTER: He Y

PROVIDER: S-EPMC8433143 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Tunable rainbow light trapping in ultrathin resonator arrays.

Project description:Rainbow light trapping in plasmonic devices allows for field enhancement of multiple wavelengths within a single device. However, many of these devices lack precise control over spatial and spectral enhancement profiles and cannot provide extremely high localised field strengths. Here we present a versatile, analytical design paradigm for rainbow trapping in nanogroove arrays by utilising both the groove-width and groove-length as tuning parameters. We couple this design technique with fabrication through multilayer thin-film deposition and focused ion beam milling, which enables the realisation of unprecedented feature sizes down to 5 nm and corresponding extreme normalised local field enhancements up to 103. We demonstrate rainbow trapping within the devices through hyperspectral microscopy and show agreement between the experimental results and simulation. The combination of expeditious design and precise fabrication underpins the implementation of these nanogroove arrays for manifold applications in sensing and nanoscale optics.

| S-EPMC7693327 | biostudies-literature

Gate-Tunable Plasmon-Induced Transparency Modulator Based on Stub-Resonator Waveguide with Epsilon-Near-Zero Materials.

Project description:We demonstrate an electrically tunable ultracompact plasmonic modulator with large modulation strength (>10?dB) and a small footprint (~1 ?m in length) via plasmon-induced transparency (PIT) configuration. The modulator based on a metal-oxide-semiconductor (MOS) slot waveguide structure consists of two stubs embedded on the same side of a bus waveguide forming a coupled system. Heavily n-doped indium tin oxide (ITO) is used as the semiconductor in the MOS waveguide. A large modulation strength is realized due to the formation of the epsilon-near-zero (ENZ) layer at the ITO-oxide interface at the wavelength of the modulated signal. Numerical simulation results reveal that such a significant modulation can be achieved with a small applied voltage of ~3V. This result shows promise in developing nanoscale modulators for next generation compact photonic/plasmonic integrated circuits.

| S-EPMC6391484 | biostudies-literature

Tailored Self-Assembled Ferroelectric Polymer Nanostructures with Tunable Response.

Project description:A facile ferroelectric nanostructures preparation method is developed based on the self-assembly of poly(2-vinylpyridine)-b-poly(vinylidene fluoride-co-trifluoroethylene)-b-poly(2-vinylpyridine) triblock copolymers (P2VP-b-P(VDF-TrFE)-b-P2VP), and the effect of morphological characteristics of the block copolymers on the ferroelectric response has been investigated for the first time. By simple adjustment of the ratio between the blocks, lamellar, cylindrical, and spherical morphologies are obtained in the melt and preserved upon crystallization of P(VDF-TrFE). However, at high P(VDF-TrFE) content, crystallization becomes dominant and drives the self-assembly of block copolymers. The crystallization study of the block copolymers reveals the preservation of the high degree of crystallinity inside the confined nanodomains as well as the reduction of the crystalline size and the Curie transition temperature with the confinement level. Only a small difference in the coercive field and the shape of the hysteresis loop is observed for block copolymers with a lamellar morphology produced either by crystallization-driven self-assembly or by confinement inside preformed lamellar domains. In contrast, delayed spontaneous polarization or the absence of dipole switching is demonstrated for the confinement of ferroelectric crystals inside both isolated cylindrical and spherical domains, exemplifying the influence of dimensionality on the critical size for ferroelectric order.

| S-EPMC6328973 | biostudies-literature

Direct measurement of ferroelectric polarization in a tunable semimetal.

Project description:Ferroelectricity, the electrostatic counterpart to ferromagnetism, has long been thought to be incompatible with metallicity due to screening of electric dipoles and external electric fields by itinerant charges. Recent measurements, however, demonstrated signatures of ferroelectric switching in the electrical conductance of bilayers and trilayers of WTe2, a semimetallic transition metal dichalcogenide with broken inversion symmetry. An especially promising aspect of this system is that the density of electrons and holes can be continuously tuned by an external gate voltage. This degree of freedom enables measurement of the spontaneous polarization as free carriers are added to the system. Here we employ capacitive sensing in dual-gated mesoscopic devices of bilayer WTe2 to directly measure the spontaneous polarization in the metallic state and quantify the effect of free carriers on the polarization in the conduction and valence bands, separately. We compare our results to a low-energy model for the electronic bands and identify the layer-polarized states that contribute to transport and polarization simultaneously. Bilayer WTe2 is thus shown to be a fully tunable ferroelectric metal and an ideal platform for exploring polar ordering, ferroelectric transitions, and applications in the presence of free carriers.

| S-EPMC8421369 | biostudies-literature

Realizing Tunable Inverse and Normal Doppler Shifts in Reconfigurable RF Metamaterials.

Project description:The Doppler effect has well-established applications in astronomy, medicine, radar and metrology. Recently, a number of experimental demonstrations of the inverse Doppler effect have begun to appear. However, the inverse Doppler effect has never been observed on an electronically reconfigurable system with an external electromagnetic wave source at radio frequencies (RF) in experiment. Here we demonstrate an experimental observation of the inverse Doppler shift on an electronically reconfigurable RF metamaterial structure, which can exhibit anomalous dispersion, normal dispersion or a stop band, depending on an applied bias voltage. Either inverse or normal Doppler shift is realized by injecting an external RF signal into the electronically reconfigurable metamaterial, on which an electronically controllable moving reflective boundary is formed. The effective velocity of this boundary and the resulting frequency shift can be tuned over a wide range by a digital switching circuit. This work is expected to open up possibilities in applying the inverse Doppler effect in wireless communications, radar and satellite navigation.

| S-EPMC4481520 | biostudies-literature

All-optical differential equation solver with constant-coefficient tunable based on a single microring resonator.

Project description:Photonic integrated circuits for photonic computing open up the possibility for the realization of ultrahigh-speed and ultra wide-band signal processing with compact size and low power consumption. Differential equations model and govern fundamental physical phenomena and engineering systems in virtually any field of science and engineering, such as temperature diffusion processes, physical problems of motion subject to acceleration inputs and frictional forces, and the response of different resistor-capacitor circuits, etc. In this study, we experimentally demonstrate a feasible integrated scheme to solve first-order linear ordinary differential equation with constant-coefficient tunable based on a single silicon microring resonator. Besides, we analyze the impact of the chirp and pulse-width of input signals on the computing deviation. This device can be compatible with the electronic technology (typically complementary metal-oxide semiconductor technology), which may motivate the development of integrated photonic circuits for optical computing.

| S-EPMC4081894 | biostudies-other

Tunable electromagnetically induced transparency in coupled three-dimensional split-ring-resonator metamaterials.

Project description:Metamaterials have recently enabled coupling induced transparency due to interference effects in coupled subwavelength resonators. In this work, we present a three dimensional (3-D) metamaterial design with six-fold rotational symmetry that shows electromagnetically induced transparency with a strong polarization dependence to the incident electromagnetic wave due to the ultra-sharp resonance line width as a result of interaction between the constituent meta-atoms. However, when the six-fold rotationally symmetric unit cell design was re-arranged into a fourfold rotational symmetry, we observed the excitation of a polarization insensitive dual-band transparency. Thus, the 3-D split-ring resonators allow new schemes to observe single and multi-band classical analogues of electromagnetically induced transparencies that has huge potential applications in slowing down light, sensing modalities, and filtering functionalities either in the passive mode or the active mode where such effects could be tuned by integrating materials with dynamic properties.

| S-EPMC4746651 | biostudies-literature

Kinetic control of tunable multi-state switching in ferroelectric thin films.

Project description:Deterministic creation of multiple ferroelectric states with intermediate values of polarization remains challenging due to the inherent bi-stability of ferroelectric switching. Here we show the ability to select any desired intermediate polarization value via control of the switching pathway in (111)-oriented PbZr0.2Ti0.8O3 films. Such switching phenomena are driven by kinetic control of the volume fraction of two geometrically different domain structures which are generated by two distinct switching pathways: one direct, bipolar-like switching and another multi-step switching process with the formation of a thermodynamically-stable intermediate twinning structure. Such control of switching pathways is enabled by the competition between elastic and electrostatic energies which favors different types of ferroelastic switching that can occur. Overall, our work demonstrates an alternative approach that transcends the inherent bi-stability of ferroelectrics to create non-volatile, deterministic, and repeatedly obtainable multi-state polarization without compromising other important properties, and holds promise for non-volatile multi-state functional applications.

| S-EPMC6427024 | biostudies-literature

Tunable Multi-switching in Plasmonic Waveguide with Kerr Nonlinear Resonator.

Project description:We propose a nanoplasmonic waveguide side-coupled with bright-dark-dark resonators in our paper. A multi-oscillator theory derived from the typical two-oscillator model, is established to describe spectral features as well as slow-light effects in bright-dark-dark structures, and confirmed by the finite-difference time domain (FDTD). That a typical plasmon induced transparency (PIT) turns to double PIT spectra is observed in this waveguide structure. At the same time, multi-switching effects with obvious double slow-light bands based on double PIT are also discovered in our proposed structure. What's more, dynamically tuning the multi-switching is achieved by means of filling Fabry-Perot resonators with the Kerr nonlinear material Ag-BaO. These results may have applications in all-optical devices, moreover, the multi-oscillator theory may play a guiding role in designing plasmonic devices.

| S-EPMC4625373 | biostudies-other

Active sorting of orbital angular momentum states of light with a cascaded tunable resonator.

Project description:The orbital angular momentum (OAM) of light has been shown to be useful in diverse fields ranging from astronomy and optical trapping to optical communications and data storage. However, one of the primary impediments preventing such applications from widespread adoption is the lack of a straightforward and dynamic method to sort incident OAM states without altering the states. Here, we report a technique that can dynamically filter individual OAM states and preserve the incident OAM states for subsequent processing. Although the working principle of this technique is based on resonance, the device operation is not limited to a particular wavelength. OAM states with different wavelengths can resonate in the resonator without any additional modulation other than changing the length of the cavity. Consequently, we are able to demonstrate a reconfigurable OAM sorter that is constructed by cascading such optical resonators. This approach does not require specially designed components and is readily amenable to integration into potential applications.

| S-EPMC6987156 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data