Browse
Submit Data
Databases
API
Help

Dataset Information

26 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Anti-biofouling NH₃ gas sensor based on reentrant thorny ZnO/graphene hybrid nanowalls.

ABSTRACT: Since toxic gas leakage may cause ecological environmental problems and even life-threatening damage, effective monitoring of toxic gas is of great importance and subject to increasing demand. However, complicated environmental factors, as well as various coexisting interferences can easily affect the sensitivity and selectivity of gas sensors, hindering their performance. Recent reports have successfully demonstrated the development of hierarchical nanostructures with desirable self-cleaning properties, yet gas sensors that can resist contamination have rarely been realized. Here, we developed a reentrant thorny ZnO/graphene hybrid nanowall structure that simultaneously repels liquid contamination and possesses NH₃ gas sensing properties. The unique reentrant and hierarchical structure, featuring an interconnected vertical graphene nanowall framework with numerous ZnO nanospikes branched on the top nanowall, is highly repellent to liquids, even biofluids with low surface tension. The hierarchical structure consisting of gas sensing graphene and ZnO can be successfully applied as an NH₃ gas sensor at room temperature, exhibiting not only excellent sensitivity, selectivity, and repeatability, but also outstanding stability even after bacterial contamination. This study provides a versatile method for fabricating reentrant and hierarchical structures with excellent liquid repellency, and offers a promising method for designing reliable gas sensors with anti-biofouling properties.

SUBMITTER: Hang T

PROVIDER: S-EPMC8433158 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

High sensitivity NH3 gas sensor with electrical readout made on paper with perovskite halide as sensor material.

Project description:In this paper we report a cheap, paper electronics based solid state gas sensor to detect NH3 gas selectively with a detection capability of better than 1 ppm. The sensor uses perovskite halide CH3NH3PbI3 (MAPI) as the active sensor material grown on a paper. This paper based sensor works at room temperature. The current through the paper sensor increases by one order on exposure to only 10 ppm NH3 gas. The calibrated sensitivity is ~55% for 1 ppm of NH3 gas in Nitrogen or Air. The current noise limited resolution estimated to be ~10 ppb. This work establishes perovskite halide as a new solid state gas sensing material that can reach sub ppm sensitivity using simple paper electronics. Use of paper and also solution method used to grow the active material makes the sensor cost effective and easy to manufacture. This type of disposable high sensitive paper sensor can be used for detection of NH3 as a marker in exhaled breathes for non-invasive diagnosis. The sensor formed on the paper, since it supports unheated operation, needs less than few nanowatt power for its operation.

| S-EPMC6533271 | biostudies-literature

Growth of carbon nanowalls at atmospheric pressure for one-step gas sensor fabrication.

Project description:Carbon nanowalls (CNWs), two-dimensional "graphitic" platelets that are typically oriented vertically on a substrate, can exhibit similar properties as graphene. Growth of CNWs reported to date was exclusively carried out at a low pressure. Here, we report on the synthesis of CNWs at atmosphere pressure using "direct current plasma-enhanced chemical vapor deposition" by taking advantage of the high electric field generated in a pin-plate dc glow discharge. CNWs were grown on silicon, stainless steel, and copper substrates without deliberate introduction of catalysts. The as-grown CNW material was mainly mono- and few-layer graphene having patches of O-containing functional groups. However, Raman and X-ray photoelectron spectroscopies confirmed that most of the oxygen groups could be removed by thermal annealing. A gas-sensing device based on such CNWs was fabricated on metal electrodes through direct growth. The sensor responded to relatively low concentrations of NO2 (g) and NH3 (g), thus suggesting high-quality CNWs that are useful for room temperature gas sensors.PACS: Graphene (81.05.ue), Chemical vapor deposition (81.15.Gh), Gas sensors (07.07.Df), Atmospheric pressure (92.60.hv).

| S-EPMC3211258 | biostudies-literature

Nucleation density and pore size tunable growth of ZnO nanowalls by a facile solution approach: growth mechanism and NO2 gas sensing properties.

Project description:Nanowalls are novel nanostructures whose 3D porous network morphology holds great potential for applications as gas sensors. The realization of such a nanowall-based gas sensor depends directly on the comprehensive understanding of the growth mechanism of the nanowalls. We induced nucleation density and pore size evolution by increasing the dipping and growth times. The investigation indicates that the 3D porous ZnO nanowalls consist of a seed layer of ZnO nanoparticles and a growth layer of the vertically grown ZnO nanosheets. The seed layer nucleation density dominance is driven by the dipping time. The pore size and the height of the as-grown ZnO nanowalls are determined by varying the growth time. Possible growth mechanisms governing the physical characteristics of the synthesized ZnO nanostructures in the solution process are proposed and discussed. The gas sensor that was fabricated from the ZnO nanowall structure exhibited strong dependence on the microstructure, which was mainly determined by the preparation conditions.

| S-EPMC9048435 | biostudies-literature

A highly responsive NH3 sensor based on Pd-loaded ZnO nanoparticles prepared via a chemical precipitation approach.

Project description:The gas-detecting ability of nanostructured ZnO has led to significant attention being paid to the development of a unique and effective approach to its synthesis. However, its poor sensitivity, cross-sensitivity to humidity, long response/recovery times and poor selectivity hinder its practical use in environmental and health monitoring. In this context, the addition of noble metals, as dopants or catalysts to modify the ZnO surface has been examined to enhance its sensing performance. Herein, we report preparation of Pd-loaded ZnO nanoparticles via a chemical precipitation approach. Various Pd loadings were employed to produce surface-modified ZnO nanostructure sensors, and their resulting NH3 sensing capabilities both in dry and humid environments were investigated. Through a comparative gas sensing study between the pure and Pd-loaded ZnO sensors upon exposure to NH3 at an optimal operating temperature of 350?°C, the Pd-loaded ZnO sensors were found to exhibit enhanced sensor responses and fast response/recovery times. The influence of Pd loading and its successful incorporation into ZnO nanostructure was examined by X-ray diffraction, high resolution-transmission electron microscopy, and X-ray photoelectron spectroscopy. XPS studies demonstrated that in all samples, Pd existed in two chemical states, namely Pd° and Pd2+. The possible sensing mechanism related to NH3 gas is also discussed in detail.

| S-EPMC6614408 | biostudies-literature

Impedance Spectroscopy-Based Reduced Graphene Oxide-Incorporated ZnO Composite Sensor for H2S Investigations.

Project description:Electrochemical impedance spectroscopy (EIS) has been applied to measure the H2S gas response of the sensor fabricated on reduced graphene oxide (rGO)-incorporated nano-zinc oxide (n-ZnO) composites. These nanocomposites were prepared by a facile one-step solution route at room temperature. The structural, surface morphological, and elemental analyses of the composite material have been investigated. EIS was carried out to study the H2S gas-sensing properties of fabricated sensors. The developed sensor showed an optimal H2S gas response to various concentrations ranging from 2 to 100 ppm at 90 °C. The H2S gas-sensing performances of pure n-ZnO and various concentrations of rGO-incorporated n-ZnO were evaluated. The H2S gas-sensing results showed that n-ZnO/rGO composites exhibited high response when compared to pure n-ZnO. The enhanced H2S response was speculated to be ascribed due to two factors. First, rGO creates reactive sites for H2S molecule adsorption. Second, rGO has great electrical conductivity compared to n-ZnO that enables the active transport of electrons from H2S gas on interaction with the sensing layer, resulting in enhanced gas response at 90 °C temperatures.

| S-EPMC6648247 | biostudies-literature

Preparation and characterisation of NH3 gas sensor based on PANI/Fe-doped CeO 2 nanocomposite.

Project description:PANI/Fe-doped CeO 2 nanocomposite was synthesised by the in-situ process. The produced powders were characterised by XRD, XPS, FT-IR, Raman, HRTEM and SEM-EDS tests. The sensors' function was based on PANI/Fe-doped CeO 2 nanocomposite with thin film deposited on top of interdigitated electrodes (IDT). NH 3 detection with PANI/Fe-doped CeO 2 nanocomposite sensor could be successfully performed even at room temperature (RT) and relative humidity of 45 %. Results demonstrated that PANI/Fe-doped CeO 2 might be promising sensing materials for detecting the low NH 3 concentration (ppm). In addition, the sensor is selective to the interfering gases, including CO, CO 2 and NO 2 . This sensor displays acceptable repeatability and stability over time.

| S-EPMC11336279 | biostudies-literature

One-step Synthesis of Ordered Pd@TiO2 Nanofibers Array Film as Outstanding NH3 Gas Sensor at Room Temperature.

Project description:The one dimensional (1D) ordered porous Pd@TiO2 nanofibers (NFs) array film have been fabricated via a facile one-step synthesis of the electrospinning approach. The Pd@TiO2 NFs (PTND3) contained Pd (2.0 wt %) and C, N element (16.2 wt %) display high dispersion of Pd nanoparticles (NPs) on TiO2 NFs. Adding Pd meshed with C, N element to TiO2 based NFs might contribute to generation of Lewis acid sites and Brønsted acid sites, which have been recently shown to enhance NH3 adsorption-desorption ability; Pd NPs could increase the quantity of adsorbed O2 on the surface of TiO2 based NFs, and accelerated the O2 molecule-ion conversion rate, enhanced the ability of electron transmission. The response time of PTND3 sensor towards 100 ppm NH3 is only 3 s at room temperature (RT). Meantime, the response and response time of the PTND3 to the NH3 is 1 and 14s even at the concentration of 100 ppb. Therefore, the ordered Pd@TiO2 NFs array NH3 sensor display great potential for practical applications.

| S-EPMC5677023 | biostudies-literature

A high-performance room-temperature NH3 gas sensor based on WO3/TiO2 nanocrystals decorated with Pt NPs.

Project description:In this work, a high-performance room-temperature ammonia (NH3) gas sensor based on Pt-modified WO3-TiO2 nanocrystals was synthesized via a two-step hydrothermal method. The structural properties were characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. The 10 at% Pt@WO3-TiO2 nanocrystals present the highest NH3 sensing performance at room temperature. Compared with the nanocrystals without Pt modification, the sensitivity of the Pt@WO3-TiO2 sensor is tenfold higher, with the lowest concentration threshold reaching the 75 ppb level. The response is approximately 92.28 to 50 ppm, and response and recovery times are 23 s and 8 s, respectively. The improved sensing was attributed to a synergetic mechanism involving the space charge layer effect and Pt metal sensitization, enhancing the electron transfer efficiency, oxygen vacancy and specific surface area. This study is expected to guide the development of high-performance room-temperature ammonia sensors for clinical breath testing.

| S-EPMC11019483 | biostudies-literature

Graphene nanomesh as highly sensitive chemiresistor gas sensor.

Project description:Graphene is a one atom thick carbon allotrope with all surface atoms that has attracted significant attention as a promising material as the conduction channel of a field-effect transistor and chemical field-effect transistor sensors. However, the zero bandgap of semimetal graphene still limits its application for these devices. In this work, ethanol-chemical vapor deposition (CVD) of a grown p-type semiconducting large-area monolayer graphene film was patterned into a nanomesh by the combination of nanosphere lithography and reactive ion etching and evaluated as a field-effect transistor and chemiresistor gas sensors. The resulting neck-width of the synthesized nanomesh was about ∼20 nm and was comprised of the gap between polystyrene (PS) spheres that was formed during the reactive ion etching (RIE) process. The neck-width and the periodicities of the graphene nanomesh (GNM) could be easily controlled depending on the duration/power of the RIE and the size of the PS nanospheres. The fabricated GNM transistor device exhibited promising electronic properties featuring a high drive current and an I(ON)/I(OFF) ratio of about 6, significantly higher than its film counterpart. Similarly, when applied as a chemiresistor gas sensor at room temperature, the graphene nanomesh sensor showed excellent sensitivity toward NO(2) and NH(3), significantly higher than their film counterparts. The ethanol-based graphene nanomesh sensors exhibited sensitivities of about 4.32%/ppm in NO(2) and 0.71%/ppm in NH(3) with limits of detection of 15 and 160 ppb, respectively. Our demonstrated studies on controlling the neck width of the nanomesh would lead to further improvement of graphene-based transistors and sensors.

| S-EPMC4861156 | biostudies-literature

Density-Controlled Growth of ZnO Nanowalls for High-Performance Photocatalysts.

Project description:ZnO nanowires and nanowalls can be fabricated on the glass substrate with a ZnO seed film and low-cost aluminum (Al) foil by the aqueous solution method (ASM), respectively. The different concentrations of ZnO precursors can use to control the densities of ZnO nanowalls. In addition, FESEM, FETEM, EDS, XRD, XPS, and CL were used to evaluate the characteristics of ZnO nanowalls. The ZnO nanowalls exhibited higher photocatalytic efficiency (99.4%) than that of ZnO nanowires (53.3%) for methylene blue (MB) degradation under UVC light irradiation at the ZnO precursors of 50 mM. This result is attributed to ZnO nanowalls with Al-doped, which can improve the separation of photogenerated electron-hole pairs for enhanced photocatalytic activity. In addition, ZnO nanowalls can also reveal higher photocatalytic activity for the degradation of tetracycline capsules (TC) rather than commercial ZnO nanopowder under UVC light irradiation. The superoxide and hydroxyl radicals play essential roles in the degradation of MB and TC solutions by the radical-trapping experiment. Furthermore, the ZnO nanowalls exhibit excellent recycling and reuse capacity for up to four cycles for the degradation of MB and TC. This study highlights the potential use of ZnO nanowalls directly grown on commercial and low-cost Al foil as noble metal-free photocatalysis.

| S-EPMC9780911 | biostudies-literature