Browse
Submit Data
Databases
API
Help

Dataset Information

19 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Hierarchical highly ordered SnO₂ nanobowl branched ZnO nanowires for ultrasensitive and selective hydrogen sulfide gas sensing.

ABSTRACT: Highly sensitive and selective hydrogen sulfide (H₂S) sensors based on hierarchical highly ordered SnO₂ nanobowl branched ZnO nanowires (NWs) were synthesized via a sequential process combining hard template processing, atomic-layer deposition, and hydrothermal processing. The hierarchical sensing materials were prepared in situ on microelectromechanical systems, which are expected to achieve high-performance gas sensors with superior sensitivity, long-term stability and repeatability, as well as low power consumption. Specifically, the hierarchical nanobowl SnO₂@ZnO NW sensor displayed a high sensitivity of 6.24, a fast response and recovery speed (i.e., 14 s and 39 s, respectively), and an excellent selectivity when detecting 1 ppm H₂S at 250 °C, whose rate of resistance change (i.e., 5.24) is 2.6 times higher than that of the pristine SnO₂ nanobowl sensor. The improved sensing performance could be attributed to the increased specific surface area, the formation of heterojunctions and homojunctions, as well as the additional reaction between ZnO and H₂S, which were confirmed by electrochemical characterization and band alignment analysis. Moreover, the well-structured hierarchical sensors maintained stable performance after a month, suggesting excellent stability and repeatability. In summary, such well-designed hierarchical highly ordered nanobowl SnO₂@ZnO NW gas sensors demonstrate favorable potential for enhanced sensitive and selective H₂S detection with long-term stability and repeatability.

SUBMITTER: Zhu LY

PROVIDER: S-EPMC8433378 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Hierarchical Branched Mesoporous TiO2-SnO2 Nanocomposites with Well-Defined n-n Heterojunctions for Highly Efficient Ethanol Sensing.

Project description:The direct assembly of functional nanoparticles into a highly crystalline mesoporous semiconductor with oriented configurations is challenging but of significance. Herein, an evaporation induced oriented co-assembly strategy is reported to incorporate SnO2 nanocrystals (NCs) into a 3D branched mesoporous TiO2 framework by using poly(ethylene oxide)-block-polystyrene (PEO-b-PS) as the template, SnO2 NCs as the direct tin source, and titanium butoxide (TBOT) as the titania precursor. Owing to the combined properties of ultrasmall particle size (3-5 nm), excellent dispersibility and presence of abundant hydroxyl groups, SnO2 NCs can easily interact with PEO block of the template through hydrogen bonding and co-assemble with hydrolyzed TBOT to form a novel hierarchical branched mesoporous structure (SHMT). After calcination, the obtained composites exhibit a unique 3D flower-like structure, which consists of numerous mesoporous rutile TiO2 branches with uniform cylindrical mesopores (≈9 nm). More importantly, the SnO2 NCs are homogeneously distributed in the mesoporous TiO2 matrix, forming numerous n-n heterojunctions. Due to the unique textual structures, the SHMT-based gas sensors show excellent gas sensing performance with fast response/recovery dynamics, high sensitivity, and selectivity toward ethanol.

| S-EPMC6918105 | biostudies-literature

3D Multi-Branched SnO2 Semiconductor Nanostructures as Optical Waveguides.

Project description:Nanostructures with complex geometry have gathered interest recently due to some unusual and exotic properties associated with both their shape and material. 3D multi-branched SnO2 one-dimensional nanostructrures, characterized by a "node"-i.e., the location where two or more branches originate, are the ideal platform to distribute signals of different natures. In this work, we study how this particular geometrical configuration affects light propagation when a light source (i.e., laser) is focused onto it. Combining scanning electron microscopy (SEM) and optical analysis along with Raman and Rayleigh scattering upon illumination, we were able to understand, in more detail, the mechanism behind the light-coupling occurring at the node. Our experimental findings show that multi-branched semiconductor 1D structures have great potential as optically active nanostructures with waveguiding properties, thus paving the way for their application as novel building blocks for optical communication networks.

| S-EPMC6804052 | biostudies-literature

Targeted and Enhanced Antimicrobial Inhibition of Mesoporous ZnO-Ag2O/Ag, ZnO-CuO, and ZnO-SnO2 Composite Nanoparticles.

Project description:In this work, mesoporous (pore size below 4 nm) composite nanoparticles of ZnO-Ag2O/Ag, ZnO-CuO, and ZnO-SnO2 of size d ≤ 10 nm (dia.) have been synthesized through the in situ solvochemical reduction method using NaBH4. These composite nanoparticles exhibited excellent killing efficacy against Gram-positive/negative bacterial and fungal strains even at a very low dose of 0.010 μg/mL. Additionally, by applying the in silico docking approach, the nanoparticles and microorganism-specific targeted proteins and their interactions have been identified to explain the best anti-bacterial/anti-fungal activities of these composites. For this purpose, the virulence and resistance causing target proteins such as PqsR, RstA, FosA, and Hsp90 of Pseudomonas aeruginosa, Acinetobacter baumannii, Klebsiella pneumoniae, and Candida albicans have been identified to find out the best inhibitory action mechanisms involved. From the in vitro study, it is revealed that all the composite nanoparticle types used here can act as potent antimicrobial components. All the composite nanoparticles have exhibited excellent inhibition against the microorganisms compared to their constituent single metal or metal oxide nanoparticles. Among the nanoparticle types, the ZnO-Ag2O/Ag composite nanoparticles exhibited the best inhibition activity compared to the other reported nanoparticles. The microorganisms which are associated with severe infections lead to the multidrug resistance and have become a huge concern in the healthcare sector. Conventional organic antibiotics are less stable at a higher temperature. Therefore, based on the current demands, this work has been focused on designing inorganic antibiotics which possess stability even under harsh conditions. In this direction, our developed composite nanoparticles were explored for potential uses in the healthcare technology, and they may solve many problems in global emergency and epidemics caused by the microorganisms.

| S-EPMC8637601 | biostudies-literature

Synthesis of ZnO Hierarchical Structures and Their Gas Sensing Properties.

Project description:Firecracker-like ZnO hierarchical structures (ZnO HS1) were synthesized by combining electrospinning with hydrothermal methods. Flower-like ZnO hierarchical structures (ZnO HS2) were prepared by a hydrothermal method using ultrasound-treated ZnO nanofibers (ZnO NFs) as raw material which has rarely been reported in previous papers. Scanning electron microscope (SEM) and transmission electron microscope's (TEM) images clearly indicated the existence of nanoparticles on the ZnO HS2 material. Both gas sensors exhibited high selectivity toward H2S gas over various other gases at 180 °C. The ZnO HS2 gas sensor exhibited higher H2S sensitivity response (50 ppm H2S, 42.298) at 180 °C than ZnO NFs (50 ppm H2S, 9.223) and ZnO HS1 (50 ppm H2S, 17.506) gas sensors. Besides, the ZnO HS2 sensor showed a shorter response time (14 s) compared with the ZnO NFs (25 s) and ZnO HS1 (19 s) gas sensors. The formation diagram of ZnO hierarchical structures and the gas sensing mechanism were evaluated. Apart from the synergistic effect of nanoparticles and nanoflowers, more point-point contacts between flower-like ZnO nanorods were advantageous for the excellent H2S sensing properties of ZnO HS2 material.

| S-EPMC6781051 | biostudies-literature

Active-ion-gated room temperature acetone gas sensing of ZnO nanowires array.

Project description:Reducing the high operation temperature of gas sensor to room temperature (RT) have attracted intense interests for its distinct preponderances, including energy-saving and super stability, which presents great prospects in commercial application. The exciting strategies for RT gas sensing, such as unique materials with activated surface or light activation, do not directly modulate the active ions for gas sensing, limiting the RT gas sensing performances. Here, an active-ion-gated strategy has been proposed for RT gas sensing with high performance and low power consumption, in which gas ions in triboelectric plasma are introduced into metal oxide semiconductor (MOS) film to act as both floating gate and active sensing ions. The active-ion-gated ZnO nanowires (NWs) array shows a sensitivity of 38.3% to 10 ppm acetone gas at RT, and the maximum power consumption is only 4.5 mW. At the same time, the gas sensor exhibits excellent selectivity to acetone. More importantly, the response (recovery) time of this sensor is as low as 11 s (25 s). It is found that OH-(H2O)4 ions in plasma are the key for realizing RT gas sensing ability, and an accompanied resistive switch is also observed. It is considered that the electron transfer between OH-(H2O)4 and ZnO NWs will forms a hydroxyl-like intermediate state (OH*) on the top of Zn2+, leading to the band bending of ZnO and activating the reactive O2 - ions on the oxygen vacancies. The active-ion-gated strategy proposed here present a novel exploration to achieving RT gas sensing performance of MOS by activating sensing properties at the scale of ions or atoms.

| S-EPMC10191029 | biostudies-literature

Nanometer-Thick ZnO/SnO2 Heterostructures Grown on Alumina for H2S Sensing.

Project description:Designing heterostructure materials at the nanoscale is a well-known method to enhance gas sensing performance. In this study, a mixed solution of zinc chloride and tin (II) chloride dihydrate, dissolved in ethanol solvent, was used as the initial precursor for depositing the sensing layer on alumina substrates using the ultrasonic spray pyrolysis (USP) method. Several ZnO/SnO2 heterostructures were grown by applying different ratios in the initial precursors. These heterostructures were used as active materials for the sensing of H2S gas molecules. The results revealed that an increase in the zinc chloride in the USP precursor alters the H2S sensitivity of the sensor. The optimal working temperature was found to be 450 °C. The sensor, containing 5:1 (ZnCl2: SnCl2·2H2O) ratio in the USP precursor, demonstrates a higher response than the pure SnO2 (∼95 times) sample and other heterostructures. Later, the selectivity of the ZnO/SnO2 heterostructures toward 5 ppm NO2, 200 ppm methanol, and 100 ppm of CH4, acetone, and ethanol was also examined. The gas sensing mechanism of the ZnO/SnO2 was analyzed and the remarkably enhanced gas-sensing performance was mainly attributed to the heterostructure formation between ZnO and SnO2. The synthesized materials were also analyzed by X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray, transmission electron microscopy, and X-ray photoelectron spectra to investigate the material distribution, grain size, and material quality of ZnO/SnO2 heterostructures.

| S-EPMC9152767 | biostudies-literature

Enhanced NO2 Sensing Performance of ZnO-SnO2 Heterojunction Derived from Metal-Organic Frameworks.

Project description:Nitrogen dioxide (NO2) is the major reason for acid rain and respiratory illness in humans. Therefore, rapid, portable, and effective detection of NO2 is essential. Herein, a novel and simple method to construct a ZnO-SnO2 heterojunction is fabricated by pyrolysis of bimetallic metal organic frameworks. The sensitivity of ZnO-SnO2 heterojunction towards 0.2 ppm NO2 under 180 °C is 37, which is 3 times that of pure ZnO and SnO2. The construction of heterojunction speeds up the response-recovery process, and this kind of material exhibits lower detection limit. The construction of heterojunction can significantly improve the NO2 sensitivity. The selectivity, stability, and moisture resistance of ZnO-SnO2 heterojunction are carried out. This could enable the realization of highly selective and sensitive portable detection of NO2.

| S-EPMC9658193 | biostudies-literature

Two-step deposition of Ag nanowires/Zn2SnO4 transparent conductive films for antistatic coatings.

Project description:Silver nanowire (AgNW) networks play an important role in the transparent conductive electrodes or antistatic coatings. In this work, we describe a facile two-step method to fabricate AgNWs/Zn2SnO4 composite films. Long AgNWs with a high aspect ratio were prepared through a modified polyol method, in which the organic octylamine hydrochloride rather than the commonly used inorganic chlorides was used as the shape-controlling agent. The AgNW networks were fabricated on the glass substrate, on which the Zn2SnO4 film was deposited, forming robust AgNWs/Zn2SnO4 composite films. The as-prepared composite films have strong adhesion, high thermal stability, low sheet resistance (5-15 ohm sq-1) and high light transmittance (85-80%), indicating a promising application prospect for transparent conductive electrodes and antistatic coatings.

| S-EPMC8697850 | biostudies-literature

Efficient and reusable ordered mesoporous WO x /SnO2 catalyst for oxidative desulfurization of dibenzothiophene.

Project description:The oxidative desulfurization (ODS) of organic sulfur compounds over tungsten oxide supported on highly ordered mesoporous SnO2 (WO x /meso-SnO2) was investigated. A series of WO x /meso-SnO2 with WO x contents from 10 wt% to 30 wt%, were prepared by conventional wet impregnation. The physico-chemical properties of the WO x /meso-SnO2 catalysts were characterized by X-ray diffraction (XRD), N2 adsorption-desorption isotherms, electron microscopy, Fourier transform infrared spectroscopy (FT-IR), Raman spectroscopy, and the temperature-programmed reduction of hydrogen (H2-TPR). The characterization results indicated that these catalysts possessed mesoporous structures with uniform pores, high specific surface areas, and well-dispersed polyoxotungstate species on the surface of meso-SnO2 support. The ODS performances were evaluated in a biphasic system (model oil/acetonitrile, S initial = 2000 ppm), using H2O2 as an oxidant, and acetonitrile as an extractant. Dibenzothiophene (DBT) in the model oil was removed completely within 60 min at 50 °C using 20 wt% WO x /meso-SnO2 catalyst. Additionally, the effect of reaction temperature, H2O2/DBT molar ratio, amount of catalyst and different sulfur-containing substrates on the catalytic performances were also investigated in detail. More importantly, the 20 wt% WO x /meso-SnO2 catalyst exhibited 100% surfur-removal efficiency without any regeneration process, even after six times recycling.

| S-EPMC9037815 | biostudies-literature

Pd-loaded SnO2 hierarchical nanospheres for a high dynamic range H2S micro sensor.

Project description:Herein, a high dynamic range H2S micro gas sensor was achieved using hierarchical Pd-loaded SnO2 nanostructures as a sensing material. SnO2 nanospheres were synthesized using a hydrothermal method without any surfactants or templates, followed by Pd nanoparticle decoration via a facile method. A hierarchical nanostructure of Pd-loaded SnO2 was formed, and its sensing abilities were compared with those of pure SnO2 nanosphere-based sensors. The Pd-loaded SnO2 hierarchical nanostructures showed an ultra-sensitive H2S detection ability down to 10 ppb, a high dynamic range (4 orders of magnitude) up to 200 ppm, and a low working temperature (150 °C). Thus, this micro gas sensor based on Pd-loaded SnO2 hierarchical nanostructures has promising applications in universal H2S detection. The fabrication method presented herein is simple, renewable and operable and thus may be extended to synthesize other types of metal oxide-based semiconductor micro sensors for application in various fields.

| S-EPMC9062717 | biostudies-literature