Conceptual-based design of an ultrabroadband microwave metamaterial absorber.
Ontology highlight
ABSTRACT:
SUBMITTER: Qu S
PROVIDER: S-EPMC8433515 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:In this paper, we propose a novel design of an ultra-wideband hybrid microwave absorber operating in the frequency range between 2 GHz and 18 GHz. This proposed hybrid absorber is composed of two different layers that integrate a multiband metamaterial absorber and a lossy dielectric layer. The metamaterial absorber consists of a periodic pattern that is composed of an arrangement of different scales of coupled resonators and a metallic ground plane, and the dielectric layer is made of epoxy foam composite loaded with low weight percentage (0.075 wt.%) of 12 mm length carbon fibers. The numerical results show a largely expanded absorption bandwidth that ranges from 2.6 GHz to 18 GHz with incident angles between 0° and 45° and for both transverse electric and transverse magnetic waves. The measurements confirm that absorption of this hybrid based metamaterial absorber exceeds 90% within the above-mentioned frequency range and it may reach an absorption rate of 99% for certain frequency ranges. The proposed idea offers a further step in developing new electromagnetic absorbers, which will impact a broad range of applications.
| S-EPMC7601967 | biostudies-literature
Project description:The ever-increasing interest towards metamaterial absorbers owes to its remarkable features such as ultra-thin nature and design flexibility. Subduing the inherent narrow bandwidth of such absorbers is the prime goal in metamaterial absorber research, as this can widen the applications areas. A greater challenge is to construct bidirectional absorber, which provides direction-insensitive absorption, as most of the existing designs exhibit single sided absorption due to the complete metal film used in the design. This work presents the realization of a bidirectional, bandwidth-enhanced metamaterial absorber with basic elements such as strips and squares optimized to have adjacent resonances leading to a bandwidth-enhanced absorption. The structural evolution of the constituent metallic components towards the formation of bandwidth-enhanced absorption is described. The bidirectional absorber exhibits more than 90% absorption between 13.40 GHz and 14.25 GHz from the two incident directions. The mechanism of absorption is studied with the surface current analysis and the effective parameters of the structure. The choice of the metallic components with four-fold rotation symmetry renders the proposed design to be polarization independent and wide-angle receptive. The numerical studies are verified experimentally at microwave frequencies, which shows a good agreement between them.
| S-EPMC6624316 | biostudies-literature
Project description:The realization of high-performance tunable absorbers for terahertz frequencies is crucial for advancing applications such as single-pixel imaging and spectroscopy. Based on the strong position sensitivity of metamaterials' electromagnetic response, we combine meta-atoms that support strongly localized modes with suspended flat membranes that can be driven electrostatically. This design maximizes the tunability range for small mechanical displacements of the membranes. We employ a micro-electro-mechanical system technology and successfully fabricate the devices. Our prototype devices are among the best-performing tunable THz absorbers demonstrated to date, with an ultrathin device thickness (~1/50 of the working wavelength), absorption varying between 60% and 80% in the initial state when the membranes remain suspended, and fast switching speed (~27 μs). The absorption is tuned by an applied voltage, with the most marked results achieved when the structure reaches the snap-down state. In this case, the resonance shifts by >200% of the linewidth (14% of the initial resonance frequency), and the absolute absorption modulation measured at the initial resonance can reach 65%. The demonstrated approach can be further optimized and extended to benefit numerous applications in THz technology.
| S-EPMC6445006 | biostudies-literature
Project description:Metamaterial (MM) perfect absorbers are realised over various spectra from visible to microwave. Recently, different approaches have been explored to integrate tunability into MM absorbers. Particularly, tuning has been illustrated through electrical-, thermal-, and photo-induced changes to the permittivity of the active medium within MM absorbers. However, the intricate design, expensive nanofabrication process, and the volatile nature of the active medium limit the widespread applications of MM absorbers. Metal-dielectric stack layered hyperbolic metamaterials (HMMs) have recently attracted much attention due to their extraordinary optical properties and rather simple design. Herein, we experimentally realised a reconfigurable HMM perfect absorber based on alternating gold (Au) and Ge2Sb2Te5 (GST225) layers for the near-infrared (N-IR) region. It shows that a red-shift of 500 nm of the absorptance peak can be obtained by changing the GST225 state from amorphous to crystalline. The nearly perfect absorptance is omnidirectional and polarisation-independent. Additionally, the absorptance peak can be reversibly switched in just five nanoseconds by re-amorphising the GST225, enabling a dynamically reconfigurable HMM absorber. Experimental data are validated numerically using the finite-difference time-domain method. The absorber fabricated using our strategy has advantages of being reconfigurable, uncomplicated, and lithography-free over conventional MM absorbers, which may open up a new path for applications in energy harvesting, photodetectors, biochemical sensing, and thermal camouflage techniques.
| S-EPMC9417818 | biostudies-literature
Project description:On the heels of metamaterial absorbers (MAs) which produce near perfect electromagnetic (EM) absorption and emission, we propose a universal electromagnetic energy conversion adapter (UEECA) based on MA. By choosing the appropriate energy converting sensors, the UEECA is able to achieve near 100% signal transfer ratio between EM energy and various forms of energy such as thermal, DC electric, or higher harmonic EM energy. The inherited subwavelength dimension and the EM field intensity enhancement can further empower UEECA in many critical applications such as energy harvesting, photoconductive antennas, and nonlinear optics. The principle of UEECA is understood with a transmission line model, which further provides a design strategy that can incorporate a variety of energy conversion devices. The concept is experimentally validated at a microwave frequency with a signal transfer ratio of 96% by choosing an RF diode as the energy converting sensor.
| S-EPMC4158331 | biostudies-literature
Project description:We report a multi-resonant terahertz (THz) metamaterial perfect absorber (MPA)-based biosensor in the working frequency range of [Formula: see text] for sensing of microorganisms (such as fungi, yeast) and wheat pesticides. Nearly [Formula: see text] absorption is realized at [Formula: see text] and [Formula: see text]. We designed our THz MPA sensor making resonators' gap area compatible with the microorganisms' size. To obtain optimum performance of the MPA, a mapping of amplitudes and shifts in the absorption resonance peaks with different structural parameters of the resonators is carried out. A very high-frequency shift is obtained for microorganisms such as Penicillium chrysogenum (fungi), yeast, and pesticides (Imidacloprid, N, N-Diethyldithiocarbamate sodium salt trihydrate, Daminozide, N, N-Diethyldithiocarbamate sodium salt hydrate, and Dicofol). An equivalent circuit model using Advance Design System (ADS) software is developed. The calculated results through the model show similar trends as obtained in the simulations using CST. Investigations of the effect of incidence angle of THz wave on the absorption spectra of the MPA are also carried out. It is found that incidence angle does not impact the stability of the lower resonance absorption peak (1.79THz). Due to the wide working frequency range, the proposed sensor is extremely suitable for the detection of all range of pesticides because their specific absorption fingerprint lies in the frequency range of 0-3.8THz. We believe that our sensor could be a potential detection tool for detecting pesticide residues in agriculture and food products. The THz MPA-based biosensor is capable of detecting a very small change in the effective dielectric constant of the MPA environment. Therefore, it can also offer huge opportunities in label-free biosensing for future biomedical applications.
| S-EPMC10640598 | biostudies-literature
Project description:Perfect absorbers are indispensable components for energy harvesting applications. While many absorbers have been proposed, they encounter inevitable drawbacks including bulkiness or instability over time. The urge for CMOS compatible absorber that can be integrated for on chip applications requires further investigation. We theoretically demonstrate Silicon (Si) based mid IR super absorber with absorption (A) reaching 0.948. Our structure is composed of multilayered N-doped Si/ Si hyperbolic metamaterial (HMM) integrated with sub-hole Si grating. Our proposed structure has tunable absorption peak that can be tuned from 4.5?µm to 11?µm through changing the grating parameters. We also propose two grating designs integrated with N-doped Si/ Si HMM that can achieve wide band absorption. The first grating design is based on Si grating incorporating different holes' height with (A) varying between 0.83 and 0.97 for wavelength from 5?µm to 7?µm. The second grating design is based on Si grating with variable holes' diameter; the latter shows broad band absorption with the maximum (A) reaching 0.97. We also show that our structure is omnidirectional. We propose an all Si based absorber which demonstrates a good candidate for thermal harvesting application.
| S-EPMC5794863 | biostudies-other
Project description:We design and demonstrate a flexible, ultrathin and double-sided metamaterial perfect absorber (MPA) at 2.39 terahertz (THz), which enables excellent light absorbance under incidences from two opposite sides. Herein, the MPA is fabricated on a λ0/10.1-thick flexible polyethylene terephthalate substrate of εr = 2.75 × (1 + 0.12i), sandwiched by two identical randomized metallic patterns by our stochastic design process. Such an MPA provides tailored permittivity and permeability to approach the impedance of free space for minimizing reflectance and a great imaginary part of the refractive index for reducing transmittance and finally results in high absorbance. Both experimental measurement and numerical simulation are in a good agreement. The flexible, ultrathin and double-sided MPA significantly differs from traditional quarter-wavelength absorbers and other single-sided perfect absorbers, paving a way toward practical THz applications in thermal emission, sensing and imaging, communications, stealth technique, and even energy harvesting.
| S-EPMC4686993 | biostudies-literature
Project description:In this paper, a broadband metamaterial microwave absorber is designed, simulated and measured. Differently from the traditional method which is only based on unit cell boundary conditions, we carried out full-wave finite integration simulations using full-sized configurations. Starting from an elementary unit cell structure, four kinds of coding metamaterial blocks, 2 × 2, 3 × 3, 4 × 4 and 6 × 6 blocks were optimized and then used as building blocks (meta-block) for the construction of numerous 12 × 12 topologies with a realistic size scale. We found the broadband absorption response in the frequency range 16 GHz to 33 GHz, in good agreement with the equivalent medium theory prediction and experimental observation. Considering various applications of metamaterials or metamaterial absorbers in the electromagnetic wave processing, including the radars or satellite communications, requires the frequency in the range up to 40 GHz. Our study could be useful to guide experimental work. Furthermore, compared to the straightforward approach that represents the metamaterials configurations as 12 × 12 matrices of random binary bits (0 and 1), our new approach achieves significant gains in the broadband absorption. Our method also may be applied to the full-sized structures with arbitrary dimensions, and thus provide a useful tool in the design of metamaterials with specific desired frequency ranges.
| S-EPMC7000747 | biostudies-literature
Project description:In this article, we present a design for a triple-band tunable metamaterial absorber with an Au nano-cuboids array, and undertake numerical research about its optical properties and local electromagnetic field enhancement. The proposed structure is investigated by the finite-difference time domain (FDTD) method, and we find that it has triple-band tunable perfect absorption peaks in the near infrared band (1000-2500 nm). We investigate some of structure parameters that influence the fields of surface plasmons (SP) resonances of the nano array structure. By adjusting the relevant structural parameters, we can accomplish the regulation of the surface plasmons resonance (SPR) peaks. In addition, the triple-band resonant wavelength of the absorber has good operational angle-polarization-tolerance. We believe that the excellent properties of our designed absorber have promising applications in plasma-enhanced photovoltaic, optical absorption switching and infrared modulator optical communication.
| S-EPMC7074931 | biostudies-literature