One Metre Plus (1M+): A Multifunctional Open-Source Sensor for Bicycles Based on Raspberry Pi.
Ontology highlight
ABSTRACT:
SUBMITTER: Henao A
PROVIDER: S-EPMC8433888 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:The zebrafish (Danio rerio) is widely used as a promising high-throughput model organism in neurobehavioral research. The mobility of zebrafish can be dissected into multiple behavior endpoints to assess its neurobehavioral performance. However, such facilities on the market are expensive and clumsy to be used in laboratories. Here, we designed a low-cost, automatic zebrafish behavior assay apparatus, barely without unintentional human operational errors. The data acquisition part, composed of Raspberry Pi and HQ Camera, automatically performs video recording and data storage. Then, the data processing process is also on the Raspberry Pi. Water droplets and inner wall reflection of multi-well cell culture plates (used for placing zebrafish) will affect the accuracy of object recognition. And during the rapid movement of zebrafish, the probability of zebrafish tracking loss increased significantly. Thus, ROI region and related thresholds were set, and the Kalman filter algorithm was performed to estimate the best position of zebrafish in each frame. In addition, all functions of this device are realized by the custom-written behavior analysis algorithm, which makes the optimization of the setup more efficient. Furthermore, this setup was also used to analyze the behavioral changes of zebrafish under different concentrations of alcohol exposure to verify the reliability and accuracy. The alcohol exposure induced an inverted U-shape dose-dependent behavior change in zebrafish, which was consistent with previous studies, showcasing that the data obtained from the setup proposed in this study are accurate and reliable. Finally, the setup was comprehensively assessed by evaluating the accuracy of zebrafish detection (precision, recall, F-score), and predicting alcohol concentration by XGBoost. In conclusion, this study provides a simple, and low-cost package for the determination of multiple behavioral parameters of zebrafish with high accuracy, which could be easily adapted for various other fields.
| S-EPMC9794099 | biostudies-literature
Project description:One of the most critical aspects of chromatographic analysis is effective data acquisition and processing. Typical approaches include software platforms designed for specific instruments or commercial data acquisition hardware boards, both of which require expensive licenses to use and operate. To increase the access and affordability of chromatographic data acquisition, especially for systems in which software control has become obsolete or must be written in-house, an open-source digital stripchart recorder has been developed. This system is built upon a Raspberry Pi single-board computer and a plug-in printed circuit board with the necessary integrated circuits for data acquisition. Using an open-source software called Processing, a complete user interface to control the system was developed that enables the acquisition, filtering, and processing of chromatographic data. The system performs comparably to more expensive platforms, with calculated values for peak area, retention time, and plate count all within 3% of the values calculated by a widely used commercial chromatography data software package.
| S-EPMC6708469 | biostudies-literature
Project description:Physical access to health facilities is an important factor in determining treatment seeking behaviour and has implications for targets within the Sustainable Development Goals, including the right to health. The increased availability of high-resolution land cover and road data from satellite imagery offers opportunities for fine-grained estimations of physical access which can support delivery planning through the provision of more realistic estimates of travel times. The data presented here is of travel time to health facilities in Uganda, Zimbabwe, Tanzania, and Mozambique. Travel times have been calculated for different facility types in each country such as Dispensaries, Health Centres, Clinics and Hospitals. Cost allocation surfaces and travel times are provided for child walking speeds but can be altered easily to account for adult walking speeds and motorised transport. With a focus on Uganda, we describe the data and method and provide the travel maps, software and intermediate datasets for Uganda, Tanzania, Zimbabwe and Mozambique.
| S-EPMC9113998 | biostudies-literature
Project description:Single-board computers such as the Raspberry Pi make it easy to control hardware setups for laboratory experiments. GPIOs and expansion boards (HATs) give access to a whole range of sensor and control hardware. However, controlling such hardware can be challenging, when many experimental setups run in parallel and the time component is critical. LabNet is a C++ optimized control layer software to give access to the Raspberry Pi connected hardware over a simple network protocol. LabNet was developed to be suitable for time-critical operations, and to be simple to expand. It leverages the actor model to simplify multithreading programming and to increase modularity. The message protocol is implemented in Protobuf and offers performance, small message size, and supports a large number of programming languages on the client side. It shows good performance compared to locally executed tools like Bpod, pyControl, or Autopilot and reaches sub-millisecond range in network communication latencies. LabNet can monitor and react simultaneously to up to 14 pairs of digital inputs, without increasing latencies. LabNet itself does not provide support for the design of experimental tasks. This is left to the client. LabNet can be used for general automation in experimental laboratories with its control PC located at some distance. LabNet is open source and under continuing development.
| S-EPMC9803348 | biostudies-literature
Project description:The ability to measure partial pressures of oxygen below 100 microbars and nanomolar dissolved oxygen concentrations in in situ laboratory systems benefits many fields including microbiology, geobiology, oceanography, chemistry, and materials science. Here, we present an easily constructible open-source design for a networked luminescence lifetime measurement system for in situ measurements in arbitrary laboratory containers. The system is well suited for measuring oxygen partial pressures in the 0-100 μbar range, with the maximum potentially usable upper range limit at around 10 mbar, depending on experimental conditions. The sensor has a limited drift and its detectability limit for oxygen is at 0.02 μbar for short timescale measurements. Each sensor can connect to a Wi-Fi network and send the logged data either over the Internet or to a local server, enabling a large number of parallel unattended experiments. Designs are also provided for attaching the sensor to various commercially available containers used in laboratories. The design files are released under an open source license, which enables other laboratories to build, customize, and use these sensors.
| S-EPMC6235348 | biostudies-literature
Project description:Fine sediment transport in rivers is important for catchment nutrient fluxes, global biogeochemical cycles, water quality and pollution in riverine, coastal and marine ecosystems. Monitoring of suspended sediment in rivers with current sensors is challenging and expensive and most monitoring setups are restricted to few single site measurements. To better understand the spatial heterogeneity of fine sediment sources and transport in river networks there is a need for new smart water turbidity sensing that is multi-site, accurate and affordable. In this work, we have created such a sensor, which detects scattered light from an LED source using two detectors in a control volume, and can be placed in a river. We compare several replicates of our sensor to different commercial turbidity probes in a mixing tank experiment using two sediment types over a wide range of typical concentrations observed in rivers. Our results show that we can achieve precise and reproducible turbidity measurements in the 0-4000 NTU or 0-16g/L range. Our sensor can also be used directly as a suspended sediment sensor and bypass an unnecessary calibration to Formazin. The developed turbidity sensor is much cheaper than existing options of comparable quality and is especially intended for distributed sensing across river networks.
| S-EPMC9209475 | biostudies-literature
Project description:We built a low-cost and hand-held device to image and analyze microfluidic droplets mainly for educational/teaching purposes in laboratory settings of universities. The device was assembled based on a Raspberry Pi with a camera attached on the back and an LCD screen on the top. We evaluated the performance of this device to capture images and videos to visualize high-throughput droplet generation in a microfluidic device. The qualities of imaging resolution and speed were sufficient for us to perform subsequent droplet analysis quantitatively through automatic image possessing. Droplet characteristics including droplet size, volume, and dispersity, as well as droplet intensity, have been measured, showing the potential of this device to analyze droplet-based assays. Most importantly, in addition to learning the knowledge and principles from classroom lectures, students can thus gain practice of using an advanced, state-of-the-art technology in a laboratory course. It will also open up opportunities to train students with skills of interdisciplinary thinking and learning.
| S-EPMC7263740 | biostudies-literature
Project description:The Internet of Things (IoT) is faced with challenges that require green solutions and energy-efficient paradigms. Architectures (such as ARM) have evolved significantly in recent years, with improvements to processor efficiency, essential for always-on devices, as a focal point. However, as far as software is concerned, few approaches analyse the advantages of writing efficient code when programming IoT devices. Therefore, this proposal aims to improve source code optimization to achieve better execution times. In addition, the importance of various techniques for writing efficient code for Raspberry Pi devices is analysed, with the objective of increasing execution speed. A complete set of tests have been developed exclusively for analysing and measuring the improvements achieved when applying each of these techniques. This will raise awareness of the significant impact the recommended techniques can have.
| S-EPMC6263706 | biostudies-literature
Project description:Purpose. Nonmydriatic fundus cameras allow retinal photography without pharmacologic dilation of the pupil. However, currently available nonmydriatic fundus cameras are bulky, not portable, and expensive. Taking advantage of recent advances in mobile technology, we sought to create a nonmydriatic fundus camera that was affordable and could be carried in a white coat pocket. Methods. We built a point-and-shoot prototype camera using a Raspberry Pi computer, an infrared-sensitive camera board, a dual infrared and white light light-emitting diode, a battery, a 5-inch touchscreen liquid crystal display, and a disposable 20-diopter condensing lens. Our prototype camera was based on indirect ophthalmoscopy with both infrared and white lights. Results. The prototype camera measured 133mm × 91mm × 45mm and weighed 386 grams. The total cost of the components, including the disposable lens, was $185.20. The camera was able to obtain good-quality fundus images without pharmacologic dilation of the pupils. Conclusion. A fully functional, inexpensive, handheld, nonmydriatic fundus camera can be easily assembled from a relatively small number of components. With modest improvements, such a camera could be useful for a variety of healthcare professionals, particularly those who work in settings where a traditional table-mounted nonmydriatic fundus camera would be inconvenient.
| S-EPMC5370517 | biostudies-literature
Project description:Playbacks of visual or audio stimuli to wild animals is a widely used experimental tool in behavioral ecology. In many cases, however, playback experiments are constrained by observer limitations such as the time observers can be present, or the accuracy of observation. These problems are particularly apparent when playbacks are triggered by specific events, such as performing a specific behavior, or are targeted to specific individuals. We developed a low-cost automated playback/recording system, using two field-deployable devices: radio-frequency identification (RFID) readers and Raspberry Pi micro-computers. This system detects a specific passive integrated transponder (PIT) tag attached to an individual, and subsequently plays back the stimuli, or records audio or visual information. To demonstrate the utility of this system and to test one of its possible applications, we tagged female and male tree swallows (Tachycineta bicolor) from two box-nesting populations with PIT tags and carried out playbacks of nestling begging calls every time focal females entered the nestbox over a six-hour period. We show that the RFID-Raspberry Pi system presents a versatile, low-cost, field-deployable system that can be adapted for many audio and visual playback purposes. In addition, the set-up does not require programming knowledge, and it easily customized to many other applications, depending on the research questions. Here, we discuss the possible applications and limitations of the system. The low cost and the small learning curve of the RFID-Raspberry Pi system provides a powerful new tool to field biologists.
| S-EPMC4393811 | biostudies-literature