Browse
Submit Data
Databases
API
Help

Dataset Information

23 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Tunable Optical Diffusers Based on the UV/Ozone-Assisted Self-Wrinkling of Thermal-Cured Polymer Films.

ABSTRACT: Tunable optical diffusers have attracted attention because of the rapid development of next generation stretchable optoelectronics and optomechanics applications. Flexible wrinkle structures have the potential to change the light path and tune the diffusion capability, which is beneficial to fabricate optical diffusers. The generation of wrinkles usually depends on an external stimulus, thus resulting in complicated fabricating equipment and processes. In this study, a facile and low-cost method is proposed to fabricate wrinkle structures by the self-wrinkling of thermal-cured polymer for tunable optical diffusers. The uncured polydimethylsiloxane (PDMS) precursors were exposed to UV/ozone to obtain hard silica layers and then crosslinked via heating to induce the wrinkle patterns. The wrinkle structures were demonstrated as strain-dependent tunable optical diffusers and the optical diffusion of transmitted light via the deformable wrinkle structures was studied and adjusted. The incident light isotropically diffused through the sample at the initial state. When the wrinkle structures deformed, it showed a more pronounced isotropic optical diffusion with uniaxial tensile strain. The optical diffusion is anisotropical with a further increase in uniaxial tensile strain. The proposed method of fabricating wrinkles by UV/ozone-assisted self-wrinkling of thermal-cured polymer films is simple and cost-effective, and the obtained structures have potential applications in tunable optical diffusers.

SUBMITTER: Jiang S

PROVIDER: S-EPMC8434521 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Preparation, Thermal, and Mechanical Characterization of UV-Cured Polymer Biocomposites with Lignin.

Project description:The preparation and the thermal and mechanical characteristics of lignin-containing polymer biocomposites were studied. Bisphenol A glycerolate (1 glycerol/phenol) diacrylate (BPA.GDA) was used as the main monomer, and butyl acrylate (BA), 2-ethylhexyl acrylate (EHA) or styrene (St) was used as the reactive diluent. Unmodified lignin (L) or lignin modified with methacryloyl chloride (L-M) was applied as an ecofriendly component. The influences of the lignin, its modification, and of the type of reactive diluent on the properties of the composites were investigated. In the biocomposites with unmodified lignin, the lignin mainly acted as a filler, and it seemed that interactions occurred between the hydroxyl groups of the lignin and the carbonyl groups of the acrylates. When methacrylated lignin was applied, it seemed to take part in the creation of a polymer network. When styrene was added as a reactive diluent, the biocomposites had a more homogeneous structure, and their thermal resistance was higher than those with acrylate monomers. The use of lignin and its methacrylic derivative as a component in polymer composites promotes sustainability in the plastics industry and can have a positive influence on environmental problems related to waste generation.

| S-EPMC7285094 | biostudies-literature

Highly Flexible, Stretchable, and Tunable Optical Diffusers with Mechanically Switchable Wettability Surfaces.

Project description:Highly stretchable and super-hydrophobic photonics provides a new geometric degree of freedom for photonic system design and self-cleaning applications. Here, we describe the design and experimental realization of mechanically stretchable and tunable photonic diffusers. These intrinsically designed diffusers (based on periodic arrays of cylindrical lenslets and microtip) were made directly on elastomer material using laser ablation. The dimensions of both the tips and the lenslet arrays play a critical role in the distribution of illumination and wettability resistance. By stretching the diffusers mechanically along the lenslet arrays, diffusion angle tuning was achieved and also a reversible change between hydrophilic to super-hydrophobic states. These multifunctional diffusers constitute an important step toward integration with flexible materials or devices such as stretchable organic light-emitting diodes and polymer light-emitting diodes.

| S-EPMC6598385 | biostudies-literature

Self-Supported Crack-Free Conducting Polymer Films with Stabilized Wrinkling Patterns and Their Applications.

Project description:Self-supported conducting polymer films with controlled microarchitectures are highly attractive from fundamental and applied points of view. Here a versatile strategy is demonstrated to fabricate thin free-standing crack-free polyaniline (PANI)-based films with stable wrinkling patterns. It is based on oxidization polymerization of pyrrole inside a pre-wrinkled PANI film, in which the wrinkled PANI film is used both as a template and oxidizing agent for the first time. The subsequently grown polypyrrole (PPy) and the formation of interpenetrated PANI/PPy networks play a decisive role in enhancing the film integrity and the stability of wrinkles. This enhancing effect is attributed to the modification of internal stresses by the interpenetrated PANI/PPy microstructures. Consequently, a crack-free film with stable controlled wrinkles such as the wavelength, orientation and spatial location has been achieved. Moreover, the wrinkling PANI/PPy film can be removed from the initially deposited substrate to become free-standing. It can be further transferred onto target substrates to fabricate hierarchical patterns and functional devices such as flexible electrodes, gas sensors, and surface-enhanced Raman scattering substrates. This simple universal enhancing strategy has been extended to fabrication of other PANI-based composite systems with crack-free film integrity and stabilized surface patterns, irrespective of pattern types and film geometries.

| S-EPMC5101525 | biostudies-literature

Tunable Magneto-Optical Kerr Effects of Nanoporous Thin Films.

Project description:Magnetoplasmonics, combining magnetic and plasmonic functions, has attracted increasing attention owing to its unique magnetic and optical properties in various nano-architectures. In this work, Ag, CoFeB and ITO layers are fabricated on anodic aluminum oxide (AAO) porous films to form hybrid multi-layered nanoporous thin films by magnetron sputtering deposition process. The designed nanostructure supports localized surface plasmon resonance (LSPR) and tunable magneto-optical (MO) activity, namely, the sign inversion, which can be controlled by AAO porous film geometry (pore diameter and inter-pore spacing) flexibly. The physical mechanism of this special MO phenomena is further analyzed and discussed by the correlation of Kerr rotation and electronic oscillations controlled by the surface plasmon resonance that is related to the nanoporous structure.

| S-EPMC5460283 | biostudies-literature

Two-dimensional metal-chalcogenide films in tunable optical microcavities.

Project description:Integration of quasi-two-dimensional (2D) films of metal-chalcogenides in optical microcavities permits new photonic applications of these materials. Here we present tunable microcavities with monolayer MoS2 or few monolayer GaSe films. We observe significant modification of spectral and temporal properties of photoluminescence (PL): PL is emitted in spectrally narrow and wavelength-tunable cavity modes with quality factors up to 7400; a 10-fold PL lifetime shortening is achieved, a consequence of Purcell enhancement of the spontaneous emission rate.

| S-EPMC4335560 | biostudies-literature

Fully Organic Bulk Polymer with Metallic Thermal Conductivity and Tunable Thermal Pathways.

Project description:Electrically insulating polymers are indispensable for electronic and energy applications, but their poor thermal conduction has increasingly become a bottleneck for high-performance devices. Highly drawn low-dimensional polymeric fibers and thin films can exhibit metallic conductivity. Extending this to bulk materials required by real world applications is prohibitive due to the additional interfacial thermal conduction barriers. It is demonstrated that highly aligned ultrahigh molecular weight polyethylene microfibers can be incorporated into a silicone matrix to yield a fully organic bulk polymer composite with a continuous vertical phonon pathway. This leads to a perpendicular thermal conductivity of 38.27 W m-1 K-1 , at par with metals and two orders of magnitude higher than other bulk organic polymers. Taking further advantage of the mechanical flexibility of the microfibers, the processing method offers the freedom to tailor heat transfer pathways in a macroscopic 3D space. The material/process opens up opportunities for efficient thermal management in high-performance devices.

| S-EPMC8292902 | biostudies-literature

Femtosecond laser directed fabrication of optical diffusers.

Project description:Optical diffusers are widely used in filament lamps, imaging systems, display technologies, lasers, and Light Emitting Diodes (LEDs). Here, a method for the fabrication of optical diffusers through femtosecond laser machining is demonstrated. Float glass surfaces were ablated with femtosecond laser light to form nanoscale ripples with dimensions comparable to the wavelength of visible light. These structures produce highly efficient and wide field of view diffusers. The machined patterns altered the average surface roughness, with the majority of particles in the range of a few hundred nanometers. The optical diffusion characteristic and a maximum diffusion angle of near 172° was achieved with optimum machining parameters. The transmission performance of the diffusers was measured to be ∼30% across the visible spectrum. The demonstrated technique has potential for producing low-cost large area optical devices. The process benefits from the flexibility of the laser writing method and enables the production of custom optical diffusers.

| S-EPMC6112377 | biostudies-literature

Nanostructured polymer films with metal-like thermal conductivity.

Project description:Due to their unique properties, polymers - typically thermal insulators - can open up opportunities for advanced thermal management when they are transformed into thermal conductors. Recent studies have shown polymers can achieve high thermal conductivity, but the transport mechanisms have yet to be elucidated. Here we report polyethylene films with a high thermal conductivity of 62 Wm-1 K-1, over two orders-of-magnitude greater than that of typical polymers (~0.1 Wm-1 K-1) and exceeding that of many metals and ceramics. Structural studies and thermal modeling reveal that the film consists of nanofibers with crystalline and amorphous regions, and the amorphous region has a remarkably high thermal conductivity, over ~16 Wm-1 K-1. This work lays the foundation for rational design and synthesis of thermally conductive polymers for thermal management, particularly when flexible, lightweight, chemically inert, and electrically insulating thermal conductors are required.

| S-EPMC6467866 | biostudies-other

Dynamic wrinkling pattern exhibiting tunable fluorescence for anticounterfeiting applications.

Project description:A dynamic surface pattern with a topography and fluorescence in response to environmental stimulus can enable information recording, hiding, and reading. Such patterns are therefore widely used in information security and anticounterfeiting. Here, we demonstrate a dynamic dual pattern using a supramolecular network comprising a copolymer containing pyridine (P4VP-nBA-S) and hydroxyl distyrylpyridine (DSP-OH) as the skin layer for bilayer wrinkling systems, in which both the wrinkle morphology and fluorescence color can be simultaneously regulated by visible light-triggered isomerization of DSP-OH, or acids. Acid-induced protonation of pyridines can dynamically regulate the cross-linking of the skin layer through hydrogen bonding, and the fluorescence of DSP-OH. On selective irradiation with 450 nm visible light or acid treatment, the resulting hierarchical patterned surface becomes smooth and wrinkled reversibly, and simultaneously its fluorescence changes dynamically from blue to orange-red. The smart surfaces with dynamic hierarchical wrinkles and fluorescence can find potential application in anticounterfeiting.

| S-EPMC7156701 | biostudies-literature

Polymer Gel with Tunable Conductive Properties: A Material for Thermal Energy Harvesting.

Project description:The spontaneous gelation of poly(4-vinyl pyridine)/pyridine solution produces materials with conductive properties that are suitable for various energy conversion technologies. The gel is a thermoelectric material with a conductivity of 2.2-5.0 × 10-6 S m-1 and dielectric constant ε = 11.3. On the molecular scale, the gel contains various types of hydrogen bonding, which are formed via self-protonation of the pyridine side chains. Our measurements and calculations revealed that the gelation process produces bias-dependent polymer complexes: quasi-symmetric, strongly hydrogen-bonded species, and weakly bound protonated structures. Under an applied DC bias, the gelled complexes differ in their capacitance/conductive characteristics. In this work, we exploited the bias-responsive characteristics of poly(4-vinyl pyridine) gelled complexes to develop a prototype of a thermal energy harvesting device. The measured device efficiency is S = ΔV/ΔT = 0.18 mV/K within the temperature range of 296-360 K. Investigation of the mechanism underlying the conversion of thermal energy into electric charge showed that the heat-controlled proton diffusion (the Soret effect) produces thermogalvanic redox reactions of hydrogen ions on the anode. The charge can be stored in an external capacitor for heat energy harvesting. These results advance our understanding of the molecular mechanisms underlying thermal energy conversion in the poly(4-vinyl pyridine)/pyridine gel. A device prototype, enabling thermal energy harvesting, successfully demonstrates a simple path toward the development of inexpensive, low-energy thermoelectric generators.

| S-EPMC9798393 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data