Browse
Submit Data
Databases
API
Help

Dataset Information

34 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Strain-controlled synthesis of ultrathin hexagonal GaTe/MoS₂ heterostructure for sensitive photodetection.

ABSTRACT: Ultrathin hexagonal GaTe, with relatively high charge density, holds great potential in the field of optoelectronic devices. However, the thermodynamical stability limits it fabrications as well as applications. Here, by introducing two-dimensional MoS₂ as the substrate, we successfully realized the phase-controlled synthesis of ultrathin h-GaTe, leading to high-quality h-GaTe/MoS₂ heterostructures. Theoretical calculation studies reveal that GaTe with hexagonal phase is more thermodynamically stable on MoS₂ templates, which can be attributed to the strain stretching and the formation energy reduction. Based on the achieved p-n heterostructures, optoelectronic devices are designed and probed, where remarkable photoresponsivity (32.5 A/W) and fast photoresponse speed (<50 μs) are obtained, indicating well-behaved photo-sensing behaviors. The study here could offer a good reference for the controlled growth of the relevant materials, and the achieved heterostructure will find promising applications in future integrated electronic and optoelectronic devices and systems.

SUBMITTER: Li F

PROVIDER: S-EPMC8437799 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Ultrasensitive Photodetection in MoS2 Avalanche Phototransistors.

Project description:Recently, there have been numerous studies on utilizing surface treatments or photosensitizing layers to improve photodetectors based on 2D materials. Meanwhile, avalanche breakdown phenomenon has provided an ultimate high-gain route toward photodetection in the form of single-photon detectors. Here, the authors report ultrasensitive avalanche phototransistors based on monolayer MoS2 synthesized by chemical vapor deposition. A lower critical field for the electrical breakdown under illumination shows strong evidence for avalanche breakdown initiated by photogenerated carriers in MoS2 channel. By utilizing the photo-initiated carrier multiplication, their avalanche photodetectors exhibit the maximum responsivity of ≈3.4 × 107 A W-1 and the detectivity of ≈4.3 × 1016 Jones under a low dark current, which are a few orders of magnitudes higher than the highest values reported previously, despite the absence of any additional chemical treatments or photosensitizing layers. The realization of both the ultrahigh photoresponsivity and detectivity is attributed to the interplay between the carrier multiplication by avalanche breakdown and carrier injection across a Schottky barrier between the channel and metal electrodes. This work presents a simple and powerful method to enhance the performance of photodetectors based on carrier multiplication phenomena in 2D materials and provides the underlying physics of atomically thin avalanche photodetectors.

| S-EPMC8498866 | biostudies-literature

Photodetection Properties of MoS2, WS2 and MoxW1-xS2 Heterostructure: A Comparative Study.

Project description:Layered transition metals dichalcogenides such as MoS2 and WS2 have shown a tunable bandgap, making them highly desirable for optoelectronic applications. Here, we report on one-step chemical vapor deposited MoS2, WS2 and MoxW1-xS2 heterostructures incorporated into photoconductive devices to be examined and compared in view of their use as potential photodetectors. Vertically aligned MoS2 nanosheets and horizontally stacked WS2 layers, and their heterostructure form MoxW1-xS2, exhibit direct and indirect bandgap, respectively. To analyze these structures, various characterization methods were used to elucidate their properties including Raman spectroscopy, X-ray diffraction, X-ray photoelectron spectrometry and high-resolution transmission electron microscopy. While all the investigated samples show a photoresponse in a broad wavelength range between 400 nm and 700 nm, the vertical MoS2 nanosheets sample exhibits the highest performances at a low bias voltage of 5 V. Our findings demonstrate a responsivity and a specific detectivity of 47.4 mA W-1 and 1.4 × 1011 Jones, respectively, achieved by MoxW1-xS2. This study offers insights into the use of a facile elaboration technique for tuning the performance of MoxW1-xS2 heterostructure-based photodetectors.

| S-EPMC9824100 | biostudies-literature

Highly Sensitive NO2 Gas Sensors Based on MoS2@MoO3 Magnetic Heterostructure.

Project description:Recently, two-dimensional (2D) materials and their heterostructures have attracted considerable attention in gas sensing applications. In this work, we synthesized 2D MoS2@MoO3 heterostructures through post-sulfurization of α-MoO3 nanoribbons grown via vapor phase transport (VPT) and demonstrated highly sensitive NO2 gas sensors based on the hybrid heterostructures. The morphological, structural, and compositional properties of the MoS2@MoO3 hybrids were studied by a combination of advanced characterization techniques revealing a core-shell structure with the coexistence of 2H-MoS2 multilayers and intermediate molybdenum oxysulfides on the surface of α-MoO3. The MoS2@MoO3 hybrids also exhibit room-temperature ferromagnetism, revealed by vibrating sample magnetometry (VSM), as a result of the sulfurization process. The MoS2@MoO3 gas sensors display a p-type-like response towards NO2 with a detection limit of 0.15 ppm at a working temperature of 125 °C, as well as superb selectivity and reversibility. This p-type-like sensing behavior is attributed to the heterointerface of MoS2-MoO3 where interfacial charge transfer leads to a p-type inversion layer in MoS2, and is enhanced by magnetic dipole interactions between the paramagnetic NO2 and the ferromagnetic sensing layer. Our study demonstrates the promising application of 2D molybdenum hybrid compounds in gas sensing applications with a unique combination of electronic and magnetic properties.

| S-EPMC9027905 | biostudies-literature

Organic Electrochemical Transistor with MoS2 Nanosheets Modified Gate Electrode for Sensitive Glucose Sensing.

Project description:An organic electrochemical transistor (OECT) with MoS2 nanosheets modified on the gate electrode was proposed for glucose sensing. MoS2 nanosheets, which had excellent electrocatalytic performance, a large specific surface area, and more active sites, were prepared by liquid phase ultrasonic exfoliation to modify the gate electrode of OECT, resulting in a large improvement in the sensitivity of the glucose sensor. The detection limit of the device modified with MoS2 nanosheets is down to 100 nM, which is 1~2 orders of magnitude better than that of the device without nanomaterial modification. This result manifests not only a sensitive and selective method for the detection of glucose based on OECT but also an extended application of MoS2 nanosheets for other biomolecule sensing with high sensitivity.

| S-EPMC10490818 | biostudies-literature

Boron vacancy: a strategy to boost the oxygen reduction reaction of hexagonal boron nitride nanosheet in hBN-MoS2 heterostructure.

Project description:The incorporation of vacancies in a system is considered a proficient method of defect engineering in general catalytic modulation. Among two-dimensional materials, the deficiency of surface active sites and a high band gap restrict the catalytic activity of hexagonal boron nitride (hBN) material towards the oxygen reduction reaction (ORR), which hinders its applicability in fuel cells. A bane to boon strategy has been introduced here by coupling two sluggish ORR materials (hBN & MoS2) by a probe-sonication method to form a heterostructure (termed HBPS) which fosters four electron pathways to assist the reduction of oxygen. Theoretical and experimental studies suggest the kinetically and thermodynamically favorable formation of boron vacancies (B-vacancies) in the presence of MoS2, which act as active sites for oxygen adsorption in HBPS. B-vacancy induced uneven charge distribution together with band gap depression promote rapid electron transfer from the valance band to the conduction band which prevails over the kinetic limitation of pure hBN nanosheets towards ORR kinetics. The formed B-vacancy induced HBPS further exhibits a low Tafel slope (66 mV dec-1), and a high onset potential (0.80 V vs. RHE) with an unaltered electrochemically active surface area (ESCA) after long-term cycling. Thus, vacancy engineering in hBN has proved to be an efficient approach to unlock the potential of catalytic performance enhancement.

| S-EPMC9419284 | biostudies-literature

ZIF-67 Anchored on MoS2/rGO Heterostructure for Non-Enzymatic and Visible-Light-Sensitive Photoelectrochemical Biosensing.

Project description:Graphene and graphene-like two-dimensional layered nanomaterials-based photoelectrochemical (PEC) biosensors have recently grown rapidly in popularity thanks to their advantages of high sensitivity and low background signal, which have attracted tremendous attention in ultrahigh sensitive small molecule detection. This work proposes a non-enzymatic and visible-light-sensitive PEC biosensing platform based on ZIF-67@MoS2/rGO composite which is synthesized through a facile and one-step microwave-assisted hydrothermal method. The combination of MoS2 and rGO could construct van der Waals heterostructures, which not only act as visible-light-active nanomaterials, but facilitate charge carriers transfer between the photoelectrode and glassy carbon electrode (GCE). ZIF-67 anchored on MoS2/rGO heterostructures provides large specific surface areas and a high proportion of catalytic sites, which cooperate with MoS2 nanosheets, realizing rapid and efficient enzyme-free electrocatalytic oxidation of glucose. The ZIF-67@MoS2/rGO-modified GCE can realize the rapid and sensitive detection of glucose at low detection voltage, which exhibits a high sensitivity of 12.62 μAmM-1cm-2. Finally, the ZIF-67@MoS2/rGO PEC biosensor is developed by integrating the ZIF-67@MoS2/rGO with a screen-printed electrode (SPE), which exhibits a high sensitivity of 3.479 μAmM-1cm-2 and a low detection limit of 1.39 μM. The biosensor's selectivity, stability, and repeatability are systematically investigated, and its practicability is evaluated by detecting clinical serum samples.

| S-EPMC10813494 | biostudies-literature

Plasmonic-tape-attached multilayered MoS2 film for near-infrared photodetection.

Project description:Molybdenum disulfide has been intensively studied as a promising material for photodetector applications because of its excellent electrical and optical properties. We report a multilayer MoS2 film attached with a plasmonic tape for near-infrared (NIR) detection. MoS2 flakes are chemically exfoliated and transferred onto a polymer substrate, and silver nanoparticles (AgNPs) dewetted thermally on a substrate are transferred onto a Scotch tape. The Scotch tape with AgNPs is attached directly and simply onto the MoS2 flakes. Consequently, the NIR photoresponse of the MoS2 device is critically enhanced. The proposed tape transfer method enables the formation of plasmonic structures on arbitrary substrates, such as a polymer substrate, without requiring a high-temperature process. The performance of AgNPs-MoS2 photodetectors is approximately four times higher than that of bare MoS2 devices.

| S-EPMC7347569 | biostudies-literature

Understanding of MoS2/GaN Heterojunction Diode and its Photodetection Properties.

Project description:Fabrication of heterojunction between 2D molybdenum disulfide (MoS2) and gallium nitride (GaN) and its photodetection properties have been reported in the present work. Surface potential mapping at the MoS2/GaN heterojunction is done using Kelvin Probe Force Microscopy to measure the conduction band offset. Current-voltage measurements show a diode like behavior of the heterojunction. The origin of diode like behavior is attributed to unique type II band alignment of the heterojunction. The photocurrent, photoresponsivity and detectivity of the heterojunction are found to be dependent on power density of the light. Photoresponse investigations reveal that the heterojunction is highly sensitive to 405 nm laser with very high responsivity up to 105 A/W. The heterojunction also shows very high detectivity of the order of 1014 Jones. Moreover, the device shows photoresponse in UV region also. These observations suggest that MoS2/GaN heterojunction can have great potential for photodetection applications.

| S-EPMC6081413 | biostudies-literature

Strain-Tunable Electronic Properties and Band Alignments in GaTe/C2N Heterostructure: a First-Principles Calculation.

Project description:Recently, GaTe and C2N monolayers have been successfully synthesized and show fascinating electronic and optical properties. Such hybrid of GaTe with C2N may induce new novel physical properties. In this work, we perform ab initio simulations on the structural, electronic, and optical properties of the GaTe/C2N van der Waals (vdW) heterostructure. Our calculations show that the GaTe/C2N vdW heterostructure is an indirect-gap semiconductor with type-II band alignment, facilitating an effective separation of photogenerated carriers. Intriguingly, it also presents enhanced visible-UV light absorption compared to its components and can be tailored to be a good photocatalyst for water splitting at certain pH by applying vertical strains. Further, we explore specifically the adsorption and decomposition of water molecules on the surface of C2N layer in the heterostructure and the subsequent formation of hydrogen, which reveals the mechanism of photocatalytic hydrogen production on the 2D GaTe/C2N heterostructure. Moreover, it is found that in-plane biaxial strains can induce indirect-direct-indirect, semiconductor-metal, and type II to type I or type III transitions. These interesting results make the GaTe/C2N vdW heterostructure a promising candidate for applications in next generation of multifunctional optoelectronic devices.

| S-EPMC6158146 | biostudies-literature

Band Gap Engineering of Hexagonal SnSe2 Nanostructured Thin Films for Infra-Red Photodetection.

Project description:We, for the first time, provide the experimental demonstration on the band gap engineering of layered hexagonal SnSe2 nanostructured thin films by varying the thickness. For 50 nm thick film, the band gap is ~2.04 eV similar to that of monolayer, whereas the band gap is approximately ~1.2 eV similar to that of bulk for the 1200 nm thick film. The variation of the band gap is consistent with the the theoretically predicted layer-dependent band gap of SnSe2. Interestingly, the 400-1200 nm thick films were sensitiveto 1064 nm laser iradiation and the sensitivity increases almost exponentiallly with thickness, while films with 50-140 nm thick are insensitive which is due to the fact that the band gap of thinner films is greater than the energy corresponding to 1064 nm. Over all, our results establish the possibility of engineering the band gap of SnSe2 layered structures by simply controlling the thickness of the film to absorb a wide range of electromagnetic radiation from infra-red to visible range.

| S-EPMC5680184 | biostudies-literature