Browse
Submit Data
Databases
API
Help

Dataset Information

30 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Effect of metal decoration on sulfur-based gas molecules adsorption on phosphorene.

ABSTRACT: Based on first-principles calculation, the adsorption of sulfur-based gas molecules (H₂S, SO₂, SO₃) on various metal-decorated phosphorenes is researched systematically. Eleven metals (Li, Na, K, Rb, Cs, Ca, Sr, Ba, Ni, La, Tl) which can avoid the formation of clusters on the phosphorene are considered. Noticeably, all metal decorations can enhance the adsorption strength of phosphorene to sulfur-based gas molecules except for H₂S on Tl-decorated phosphorene. Meanwhile, the adsorption energy (E_ads) shows the trend of E_ads(H₂S) < E_ads(SO₂) < E_ads(SO₃) for the same metal decoration case. In addition, some metal-decorated phosphorene systems exhibit intriguing magnetic and electrical variation after sulfur-based gas molecule adsorptions, indicating that these systems are promising to be candidates for the detection and removal of sulfur-based gas molecules.

SUBMITTER: Wang Y

PROVIDER: S-EPMC8438081 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Nitrogen-based gas molecule adsorption of monolayer phosphorene under metal functionalization.

Project description:Using the first-principles calculation based on density functional theory (DFT), the adsorption properties of nitrogen-based gases molecules (NH3, NO, NO2) on various metal (Li, Na, K, Rb, Cs, Ca, Sr, Ba, Ni, La, Tl) decorated phosphorene systems have been studied systematically. The results show that all metal decorations can improve the adsorption strength of phosphorene to nitrogen-based gases molecules except for Tl decoration. Especially, the adsorption energy of NH3 molecule on Ni decorated phosphorene is 1.305?eV, and the adsorption energies of NO and NO2 on La decorated phosphorene can be up to 2.475 and 3.734?eV, respectively. In addition, after NO and NO2 adsorptions, the electronic and magnetic properties of some metal decorated phosphorenes change, indicating that the metal decorated phosphorenes have great potential in NO and NO2 detection.

| S-EPMC6715726 | biostudies-literature

CO Adsorption on Metal-Decorated Phosphorene.

Project description:Using first principle calculations, we have investigated the adsorption of CO gas on various metal-decorated phosphorene. Almost all of the metals were considered to decorate phosphorene. By comparing binding energy (E b) and cohesive energy (E c), only 10 metals (Li, Na, K, Rb, Cs, Ca, Sr, Ba, Pd, and La) can stably decorate phosphorene and avoid clustering. CO adsorptions on these metal-decorated systems were calculated, and the mechanism of interaction between CO and metal atoms was analyzed in detail. E a shows a significant improvement after metal decoration, excerpt for Rb and Cs. The results imply that Li-, Na-, K-, Ca-, Sr-, Ba-, and La-decorated phosphorene could be used as CO elimination or reversible CO storage.

| S-EPMC6641591 | biostudies-literature

Adsorption of gas molecules on monolayer MoS2 and effect of applied electric field.

Project description:: Using first-principles calculations, we investigate the adsorption of various gas molecules (H2, O2, H2O, NH3, NO, NO2, and CO) on monolayer MoS2. The most stable adsorption configuration, adsorption energy, and charge transfer are obtained. It is shown that all the molecules are weakly adsorbed on the monolayer MoS2 surface and act as charge acceptors for the monolayer, except NH3 which is found to be a charge donor. Furthermore, we show that charge transfer between the adsorbed molecule and MoS2 can be significantly modulated by a perpendicular electric field. Our theoretical results are consistent with the recent experiments and suggest MoS2 as a potential material for gas sensing application.

| S-EPMC4015638 | biostudies-literature

Highly Sensitive and Selective DNA Sequencing Device Using Metal Adatom Adsorption on 2D Phosphorene.

Project description:Two-dimensional (2D) material revolutionarily extends the technique capability of traditional nanopore/nanogap-based DNA sequencing devices. However, challenges associated with DNA sequencing on nanopores still remained in improving the sensitivity and specificity. Herein, by first-principles calculation, we theoretically studied the potential of transition-metal elements (Cr, Fe, Co, Ni, and Au) anchored on monolayer black phosphorene (BP) to act as all-electronic DNA sequencing devices. The spin-polarized band structures appeared in Cr-, Fe-, Co-, and Au-doped BP. Remarkably, the adsorption energy of nucleobases can be significantly enhanced on BP with Co, Fe, and Cr doping, which contribute to the enlarged current signal and lower noise levels. Furthermore, the order of nucleobases in terms of their adsorption energies onto the Cr@BP is C > A > G > T, which exhibits more distinct adsorption energies than Fe@BP or Co@BP. Therefore, Cr-doped BP is more effective to avoid ambiguity in recognizing various bases. We thus envisaged a possibility of a highly sensitive and selective DNA sequencing device based on phosphorene.

| S-EPMC10210229 | biostudies-literature

Novel Lanthanide(III) Porphyrin-Based Metal-Organic Frameworks: Structure, Gas Adsorption, and Magnetic Properties.

Project description:The present work focuses on the hydrothermal synthesis and properties of porous coordination polymers of metal-porphyrin framework (MPF) type, namely, {[Pr4(H2TPPS)3]·11H2O} n (UPJS-10), {[Eu/Sm(H2TPPS)]·H3O+·16H2O} n (UPJS-11), and {[Ce4(H2TPPS)3]·11H2O} n (UPJS-12) (H2TPPS = 4,4',4″,4‴-(porphyrin-5,10,15,20-tetrayl)tetrakisbenzenesulfonate(4-)). The compounds were characterized using several analytical techniques: infrared spectroscopy, thermogravimetric measurements, elemental analysis, gas adsorption measurements, and single-crystal structure analysis (SXRD). The results of SXRD revealed a three-dimensional open porous framework containing crossing cavities propagating along all crystallographic axes. Coordination of H2TPPS4- ligands with Ln(III) ions leads to the formation of 1D polymeric chains propagating along the c crystallographic axis. Argon sorption measurements at -186 °C show that the activated MPFs have apparent BET surface areas of 260 m2 g-1 (UPJS-10) and 230 m2 g-1 (UPJS-12). Carbon dioxide adsorption isotherms at 0 °C show adsorption capacities up to 1 bar of 9.8 wt % for UPJS-10 and 8.6 wt % for UPJS-12. At a temperature of 20 °C, the respective CO2 adsorption capacities decreased to 6.95 and 5.99 wt %, respectively. The magnetic properties of UPJS-10 are characterized by the presence of a close-lying nonmagnetic ground singlet and excited doublet states in the electronic spectrum of Pr(III) ions. A much larger energy difference was suggested between the two lowest Kramers doublets of Ce(III) ions in UPJS-12. Finally, the analysis of X-band EPR spectra revealed the presence of radical spins, which were tentatively assigned to be originating from the porphyrin ligands.

| S-EPMC8482518 | biostudies-literature

Exceptional Adsorption and Binding of Sulfur Dioxide in a Robust Zirconium-Based Metal-Organic Framework.

Project description:We report a record-high SO2 adsorption capacity of 12.3 mmol g-1 in a robust porous material, MFM-601, at 298 K and 1.0 bar. SO2 adsorption in MFM-601 is fully reversible and highly selective over CO2 and N2. The binding domains for adsorbed SO2 and CO2 molecules in MFM-601 have been determined by in situ synchrotron X-ray diffraction experiments, giving insights at the molecular level to the basis of the observed high selectivity.

| S-EPMC6301759 | biostudies-literature

Computational Study on Metal-Ion-Decorated Prismane Molecules for Selective Adsorption of CO<sub>2</sub> from Flue Gas Mixtures.

Project description:Selective adsorption of CO2 from flue gas is extremely significant because of its increasing concentration in air and its deleterious effect on the environment. In this work, we have explored metal-ion-bound prismane molecules for selective CO2 adsorption from the flue gas mixture. The Ca2+-bound prismane complex exhibits superior CO2 selectivity and adsorption capacity. The calculated binding energy and molecular electrostatic potential (MESP) analysis showed that the rectangular face of prismane binds strongly with metal ions as compared to its triangular face. The CBS-QB3 and density functional theory-based functional M06-2X/6-311+G(d) calculations show that the prismane molecule can bind to one Li+, K+, Mg2+, and Ca2+ ion with favorable binding energy. The metal-ion-bound prismane complexes have been examined for their CO2, N2, and CH4 adsorption capacity. Prismane-Ca2+ can bind with six CO2 molecules strongly with an average binding energy of -18.1 kcal/mole as compared to six N2 (-12.6) and five CH4 (-13.4) gas molecules. The gravimetric density calculated for the CO2-adsorbed prismane-Ca2+ complex has been found to be 69.1 wt %. The discrete hydrocarbon structure for selective separation of CO2 is rare in the literature and can have potential applications for cost-effective CO2 capture from the flue gas mixture.

| S-EPMC7726950 | biostudies-literature

Ultrahigh sensitivity and layer-dependent sensing performance of phosphorene-based gas sensors.

Project description:Two-dimensional (2D) layered materials have attracted significant attention for device applications because of their unique structures and outstanding properties. Here, a field-effect transistor (FET) sensor device is fabricated based on 2D phosphorene nanosheets (PNSs). The PNS sensor exhibits an ultrahigh sensitivity to NO2 in dry air and the sensitivity is dependent on its thickness. A maximum response is observed for 4.8-nm-thick PNS, with a sensitivity up to 190% at 20 parts per billion (p.p.b.) at room temperature. First-principles calculations combined with the statistical thermodynamics modelling predict that the adsorption density is ∼10(15) cm(-2) for the 4.8-nm-thick PNS when exposed to 20 p.p.b. NO2 at 300 K. Our sensitivity modelling further suggests that the dependence of sensitivity on the PNS thickness is dictated by the band gap for thinner sheets (<10 nm) and by the effective thickness on gas adsorption for thicker sheets (>10 nm).

| S-EPMC4639804 | biostudies-literature

Air oxidation of sulfur mustard gas simulants using a pyrene-based metal-organic framework photocatalyst.

Project description:We demonstrate a microporous metal-organic framework NU-400 based on a 2,7-disubstituted pyrene linker as a highly efficient photosensitizer for generating singlet oxygen and subsequent oxidative degradation of chemical warfare agents (CWAs). The high activity of NU-400 permits photocatalytic conversion of the 2-chloroethyl ethyl sulfide (CEES) mustard gas simulant into a benign sulfoxide derivative, in air, with less than 15 minutes' half-life. This is a considerable improvement to NU-1000, based on a 1,3,6,8-tetrasubstituted pyrene unit, demonstrating how variation of the substitution pattern of a metal-organic framework linker permits modification of its photoactive behavior.

| S-EPMC6941406 | biostudies-literature

A comprehensive transformer-based approach for high-accuracy gas adsorption predictions in metal-organic frameworks.

Project description:Gas separation is crucial for industrial production and environmental protection, with metal-organic frameworks (MOFs) offering a promising solution due to their tunable structural properties and chemical compositions. Traditional simulation approaches, such as molecular dynamics, are complex and computationally demanding. Although feature engineering-based machine learning methods perform better, they are susceptible to overfitting because of limited labeled data. Furthermore, these methods are typically designed for single tasks, such as predicting gas adsorption capacity under specific conditions, which restricts the utilization of comprehensive datasets including all adsorption capacities. To address these challenges, we propose Uni-MOF, an innovative framework for large-scale, three-dimensional MOF representation learning, designed for multi-purpose gas prediction. Specifically, Uni-MOF serves as a versatile gas adsorption estimator for MOF materials, employing pure three-dimensional representations learned from over 631,000 collected MOF and COF structures. Our experimental results show that Uni-MOF can automatically extract structural representations and predict adsorption capacities under various operating conditions using a single model. For simulated data, Uni-MOF exhibits remarkably high predictive accuracy across all datasets. Additionally, the values predicted by Uni-MOF correspond with the outcomes of adsorption experiments. Furthermore, Uni-MOF demonstrates considerable potential for broad applicability in predicting a wide array of other properties.

| S-EPMC10907743 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data