Browse
Submit Data
Databases
API
Help

Dataset Information

8 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Oxygen-Containing Functional Groups Regulating the Carbon/Electrolyte Interfacial Properties Toward Enhanced K⁺ Storage.

ABSTRACT: Oxygen-containing functional groups were found to effectively boost the K⁺ storage performance of carbonaceous materials, however, the mechanism behind the performance enhancement remains unclear. Herein, we report higher rate capability and better long-term cycle performance employing oxygen-doped graphite oxide (GO) as the anode material for potassium ion batteries (PIBs), compared to the raw graphite. The in situ Raman spectroscopy elucidates the adsorption-intercalation hybrid K⁺ storage mechanism, assigning the capacity enhancement to be mainly correlated with reversible K⁺ adsorption/desorption at the newly introduced oxygen sites. It is unraveled that the C=O and COOH rather than C-O-C and OH groups contribute to the capacity enhancement. Based on in situ Fourier transform infrared (FT-IR) spectra and in situ electrochemical impedance spectroscopy (EIS), it is found that the oxygen-containing functional groups regulate the components of solid electrolyte interphase (SEI), leading to the formation of highly conductive, intact and robust SEI. Through the systematic investigations, we hereby uncover the K⁺ storage mechanism of GO-based PIB, and establish a clear relationship between the types/contents of oxygen functional groups and the regulated composition of SEI.

SUBMITTER: Peng Y

PROVIDER: S-EPMC8438096 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Trapped interfacial redox introduces reversibility in the oxygen reduction reaction in a non-aqueous Ca2+ electrolyte.

Project description:Electrochemical investigations of the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) have been conducted in a Ca2+-containing dimethyl sulfoxide electrolyte. While the ORR appears irreversible, the introduction of a tetrabutylammonium perchlorate (TBAClO4) co-salt in excess concentrations results in the gradual appearance of a quasi-reversible OER process. Combining the results of systematic cyclic voltammetry investigations, the degree of reversibility depends on the ion pair competition between Ca2+ and TBA+ cations to interact with generated superoxide (O2 -). When TBA+ is in larger concentrations, and large reductive overpotentials are applied, a quasi-reversible OER peak emerges with repeated cycling (characteristic of formulations without Ca2+ cations). In situ Raman microscopy and rotating ring-disc electrode (RRDE) experiments revealed more about the nature of species formed at the electrode surface and indicated the progressive evolution of a charge storage mechanism based upon trapped interfacial redox. The first electrochemical step involves generation of O2 -, followed primarily by partial passivation of the surface by Ca x O y product formation (the dominant initial reaction). Once this product matrix develops, the subsequent formation of TBA+--O2 - is contained within the Ca x O y product interlayer at the electrode surface and, consequently, undergoes a facile oxidation reaction to regenerate O2.

| S-EPMC8246276 | biostudies-literature

Revisit Electrolyte Chemistry of Hard Carbon in Ether for Na Storage.

Project description:Hard carbons (HCs) as an anode material in sodium ion batteries present enhanced electrochemical performances in ether-based electrolytes, giving them potential for use in practical applications. However, the underlying mechanism behind the excellent performances is still in question. Here, ex situ nuclear magnetic resonance, gas chromatography-mass spectrometry, and high-resolution transmission electron microscopy were used to clarify the insightful chemistry of ether- and ester-based electrolytes in terms of the solid-electrolyte interphase (SEI) on hard carbons. The results confirm the marked electrolyte decomposition and the formation of a SEI film in EC/DEC but no SEI film in the case of diglyme. In situ electrochemical quartz crystal microbalance and molecular dynamics support that ether molecules have likely been co-intercalated into hard carbons. To our knowledge, these results are reported for the first time. It might be very useful for the rational design of advanced electrode materials based on HCs in the future.

| S-EPMC8397355 | biostudies-literature

Boron Trifluoride Anionic Side Groups in Polyphosphazene Based Polymer Electrolyte with Enhanced Interfacial Stability in Lithium Batteries.

Project description:A modified polyphosphazene was synthesized using a mixed substitution at phosphorus consisting of 2-(2-methoxyethoxy)ethoxy side groups and anionic trifluoroborate groups. The primary goal was to increase the low lithium ion conductivities of the conventional lithium salt containing poly[2-(2-methoxyethoxy)ethoxy-phosphazene] (MEEP) by the immobilized anionic groups. As in previous studies, the mechanical stability was stabilized by UV induced radiation cross linking. By variation of the molar ratio between different side groups, mechanical and electrochemical properties are controllable. The polymer demonstrated large electrochemical stability windows ranging between 0 and 4.5 V versus the Li/Li⁺ reference. Total and lithium conductivities of 3.6 × 10-4 S·cm-1 and 1.8 × 10-5 S·cm-1 at 60 °C were revealed for the modified MEEP. When observed in special visualization cells, dendrite formation onset time and short-circuit time were determined as 21 h and 90 h, respectively, under constant current polarization (16 h and 65 h for MEEP, both with 15 wt % LiBOB), which hints to a more stable Li/polymer interface compared to normal MEEP. The enhanced dendrite suppression ability can be explained by the formation of a more conductive solid electrolyte interphase (SEI) and the existence of F-contained SEI components (such as LiF). With the addition of ethylene carbonate⁻dimethyl carbonate (EC/DMC) to form MEE-co-OBF₃P gel polymer, both total and lithium conductivity were enhanced remarkably, and the lithium transference numbers reached reasonable values (σtotal = 1.05 mS·cm-1, σLi⁺ = 0.22 mS·cm-1, t Li + = 0.18 at 60 °C).

| S-EPMC6401971 | biostudies-literature

Great Enhancement of Carbon Energy Storage through Narrow Pores and Hydrogen-Containing Functional Groups for Aqueous Zn-Ion Hybrid Supercapacitor.

Project description:The proton transfer mechanism on the carbon cathode surface has been considered as an effective way to boost the electrochemical performance of Zn-ion hybrid supercapacitors (SCs) with both ionic liquid and organic electrolytes. However, cheaper, potentially safer, and more environmental friendly supercapacitor can be achieved by using aqueous electrolyte. Herein, we introduce the proton transfer mechanism into a Zn-ion hybrid supercapacitor with the ZnSO4 aqueous electrolyte and functionalized activated carbon cathode materials (FACs). We reveal both experimentally and theoretically an enhanced performance by controlling the micropores structure and hydrogen-containing functional groups (-OH and -NH functions) of the activated carbon materials. The Zn-ion SCs with FACs exhibit a high capacitance of 435 F g-1 and good stability with 89% capacity retention over 10,000 cycles. Moreover, the proton transfer effect can be further enhanced by introducing extra hydrogen ions in the electrolyte with low pH value. The highest capacitance of 544 F g-1 is obtained at pH = 3. The proton transfer process tends to take place preferentially on the hydroxyl-groups based on the density functional theory (DFT) calculation. The results would help to develop carbon materials for cheaper and safer Zn-ion hybrid SCs with higher energy.

| S-EPMC6680928 | biostudies-literature

Electron Storage Capability and Singlet Oxygen Productivity of a RuII Photosensitizer Containing a Fused Naphthaloylenebenzene Moiety at the 1,10-Phenanthroline Ligand.

Project description:As a novel rylene type dye a diimine ligand with a fully rigid and extended π-system in its backbone was prepared by directly fusing a 1,10-phenanthroline building block with 1,8-naphthalimide. The corresponding heteroleptic ruthenium photosensitizer bearing one biipo and two tbbpy ligands was synthesized and extensively analyzed by a combination of NMR, single crystal X-ray diffraction, steady-state absorption and emission, time-resolved spectroscopy and different electrochemical measurements supported by time-dependent density functional theory calculations. The cyclic and differential pulse voltammograms revealed, that the naphthaloylenebenzene moiety enables an additional second reduction of the ligand. Moreover, this ligand possesses a very broad absorption in the visible region. In the RuII complex this causes an overlap of ligand-centered and metal-to-ligand charge transfer transitions. The emission of the complex is clearly redshifted compared to the ligand emission with very long-lived excited states lifetimes of 1.7 and 24.7 μs in oxygen-free acetonitrile solution. This behavior is accompanied by a surprisingly high oxygen sensitivity. Finally, this photosensitizer was successfully applied for the effective evolution of singlet oxygen challenging some of the common RuII prototype complexes.

| S-EPMC7820985 | biostudies-literature

The synergistic effect of oxygen-containing functional groups on CO2 adsorption by the glucose-potassium citrate-derived activated carbon.

Project description:A high surface area activated carbon prepared by an innovative approach using glucose as a carbon source and neutral potassium citrate (PC) as an activator was compared with the porous carbon from glucose using corrosive potassium hydroxide (KOH) as an activator. The PC method showed two notable advantages over KOH activation. The PC method not only significantly increased the yield of the activated carbon, particularly at high carbonization temperatures without sacrificing porosity, but also enhanced the oxygen content in the activated carbon. After investigating CO2 adsorption on these activated carbons, a remarkable uptake of 3.57 mmol g-1 at 25 °C at 1 bar was observed by the glucose-PC-derived carbon sample, which possessed the highest oxygen content. In addition, the glucose-PC-derived carbon samples exhibited higher CO2/N2 selectivity than the glucose-KOH derived samples. Coupled with the density functional theory (DFT) analysis that focused on the binding energy calculation, the doped oxygen-containing functional groups, such as carboxyl and hydroxyl groups, could effectively enhance the adsorption of CO2.

| S-EPMC9090663 | biostudies-literature

Synthetic Strategies toward Natural Products Containing Contiguous Stereogenic Quaternary Carbon Atoms.

Project description:Strategies for the total synthesis of complex natural products that contain two or more contiguous stereogenic quaternary carbon atoms in their intricate structures are reviewed with 12 representative examples. Emphasis has been put on methods to create quaternary carbon stereocenters, including syntheses of the same natural product by different groups, thereby showcasing the diversity of thought and individual creativity. A compendium of selected natural products containing two or more contiguous stereogenic quaternary carbon atoms and key reactions in their total or partial syntheses is provided in the Supporting Information.

| S-EPMC4865016 | biostudies-literature

Improved Na+/K+ Storage Properties of ReSe2-Carbon Nanofibers Based on Graphene Modifications.

Project description:Rhenium diselenide (ReSe2) has caused considerable concerns in the field of energy storage because the compound and its composites still suffer from low specific capacity and inferior cyclic stability. In this study, ReSe2 nanoparticles encapsulated in carbon nanofibers were synthesized successfully with simple electrospinning and heat treatment. It was found that graphene modifications could affect considerably the microstructure and electrochemical properties of ReSe2-carbon nanofibers. Accordingly, the modified compound maintained a capacity of 227 mAh g-1 after 500 cycles at 200 mA g-1 for Na+ storage, 230 mAh g-1 after 200 cycles at 200 mA g-1, 212 mAh g-1 after 150 cycles at 500 mA g-1 for K+ storage, which corresponded to the capacity retention ratios of 89%, 97%, and 86%, respectively. Even in Na+ full cells, its capacity was maintained to 82% after 200 cycles at 1C (117 mA g-1). The superior stability of ReSe2-carbon nanofibers benefitted from the extremely weak van der Waals interactions and large interlayer spacing of ReSe2, in association with the role of graphene-modified carbon nanofibers, in terms of the shortening of electron/ion transport paths and the improvement of structural support. This study may provide a new route for a broadened range of applications of other rhenium-based compounds.

| S-EPMC7770771 | biostudies-literature

Hierarchical Porous Carbon-PtPd Catalysts and Their Activity toward Oxygen Reduction Reaction.

Project description:PtPd bimetallic catalysts supported on hierarchical porous carbon (HPC) with different porous sizes were developed for the oxygen reduction reaction (ORR) toward fuel cell applications. The HPC pore size was controlled by using SiO2 nanoparticles as a template with different sizes, 287, 371, and 425 nm, to obtain three HPC materials denoted as HPC-1, HPC-2, and HPC-3, respectively. PtPd/HPC catalysts were characterized by scanning electron microscopy, X-ray photoelectron spectroscopy, X-ray diffraction, and high-resolution transmission electron microscopy. The electrochemical performance was examined by cyclic voltammetry and linear sweep voltammetry. PtPd/HPC-2 turned out to be the most optimal catalyst with an electroactive surface area (ESA) of 40.2 m2 g-1 and a current density for ORR of -1285 A g-1 at 2 mV s-1 and 1600 rpm. In addition, we conducted a density functional theory computational study to examine the interactions between a PtPd cluster and a graphitic domain of HPC, as well as the interaction between the catalyst and the oxygen molecule. These results reveal the strong influence of the porous size (in HPC) and ESA values (in PtPd nanoparticles) in the mass transport process which rules the electrochemical performance.

| S-EPMC9219087 | biostudies-literature

A Highly Warped Heptagon-Containing sp2 Carbon Scaffold via Vinylnaphthyl ?-Extension.

Project description:A new strategy is demonstrated for the synthesis of warped, negatively curved, all-sp2 -carbon ?-scaffolds. Multifold C-C coupling reactions are used to transform a polyaromatic borinic acid into a saddle-shaped polyaromatic hydrocarbon (2) bearing two heptagonal rings. Notably, this Schwarzite substructure is synthesized in only two steps from an unfunctionalized alkene. A highly warped structure of 2 was revealed by X-ray crystallographic studies and pronounced flexibility of this ?-scaffold was ascertained by experimental and computational studies. Compound 2 exhibits excellent solubility, visible range absorption and fluorescence, and readily undergoes two reversible one-electron oxidations at mild potentials.

| S-EPMC6900032 | biostudies-literature