Browse
Submit Data
Databases
API
Help

Dataset Information

15 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Production of high-energy Li-ion batteries comprising silicon-containing anodes and insertion-type cathodes.

ABSTRACT: Rechargeable Li-based battery technologies utilising silicon, silicon-based, and Si-derivative anodes coupled with high-capacity/high-voltage insertion-type cathodes have reaped significant interest from both academic and industrial sectors. This stems from their practically achievable energy density, offering a new avenue towards the mass-market adoption of electric vehicles and renewable energy sources. Nevertheless, such high-energy systems are limited by their complex chemistry and intrinsic drawbacks. From this perspective, we present the progress, current status, prevailing challenges and mitigating strategies of Li-based battery systems comprising silicon-containing anodes and insertion-type cathodes. This is accompanied by an assessment of their potential to meet the targets for evolving volume- and weight-sensitive applications such as electro-mobility.

SUBMITTER: Eshetu GG

PROVIDER: S-EPMC8443554 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Data for an Advanced Microstructural and Electrochemical Datasheet on 18650 Li-ion Batteries with Nickel-Rich NMC811 Cathodes and Graphite-Silicon Anodes.

Project description:The data presented here were collected from a commercial LG Chem cylindrical INR18650 MJ1 lithium-ion (Li-ion) battery (approximate nominal specifications: 3.5 Ah, 3.6?V, 12.2?Wh). Electrochemical and microstructural information is presented, the latter collected across several length scales using X-ray computed tomography (CT): from cell to particle. One cell-level tomogram, four assembly-level and two electrode/particle-level 3D datasets are available; all data was collected in the pristine state. The electrochemical data consists of the full current and voltage charge-discharge curves for 400 operational cycles. All data has been made freely available via a repository [10.5522/04/c.4994651] in order to aid in the development of improved computational models for commercially-relevant Li-ion battery materials.

| S-EPMC7394852 | biostudies-literature

Towards High Capacity Li-ion Batteries Based on Silicon-Graphene Composite Anodes and Sub-micron V-doped LiFePO<sub>4</sub> Cathodes.

Project description:Lithium iron phosphate, LiFePO4 (LFP) has demonstrated promising performance as a cathode material in lithium ion batteries (LIBs), by overcoming the rate performance issues from limited electronic conductivity. Nano-sized vanadium-doped LFP (V-LFP) was synthesized using a continuous hydrothermal process using supercritical water as a reagent. The atomic % of dopant determined the particle shape. 5 at. % gave mixed plate and rod-like morphology, showing optimal electrochemical performance and good rate properties vs. Li. Specific capacities of >160?mAh g-1 were achieved. In order to increase the capacity of a full cell, V-LFP was cycled against an inexpensive micron-sized metallurgical grade Si-containing anode. This electrode was capable of reversible capacities of approximately 2000?mAh g-1 for over 150 cycles vs. Li, with improved performance resulting from the incorporation of few layer graphene (FLG) to enhance conductivity, tensile behaviour and thus, the composite stability. The cathode material synthesis and electrode formulation are scalable, inexpensive and are suitable for the fabrication of larger format cells suited to grid and transport applications.

| S-EPMC5127186 | biostudies-literature

Enhancing the energy density of safer Li-ion batteries by combining high-voltage lithium cobalt fluorophosphate cathodes and nanostructured titania anodes.

Project description:Recently, Li-ion batteries have been heavily scrutinized because of the apparent incompatibility between safety and high energy density. This work report a high voltage full battery made with TiO2/Li3PO4/Li2CoPO4F. The Li2CoPO4F cathode and TiO2 anode materials are synthesized by a sol-gel and anodization methods, respectively. X-ray diffraction (XRD) analysis confirmed that Li2CoPO4F is well-crystallized in orthorhombic crystal structure with Pnma space group. The Li3PO4-coated anode was successfully deposited as shown by the (011) lattice fringes of anatase TiO2 and (200) of γ-Li3PO4, as detected by HRTEM. The charge profile of Li2CoPO4F versus lithium shows a plateau at 5.0 V, revealing its importance as potentially high-voltage cathode and could perfectly fit with the plateau of anatase anode (1.8-1.9 V). The full cell made with TiO2/Li3PO4/Li2CoPO4F delivered an initial reversible capacity of 150 mA h g(-1) at C rate with good cyclic performance at an average potential of 3.1-3.2 V. Thus, the full cell provides an energy density of 472 W h kg(-1). This full battery behaves better than TiO2/Li2CoPO4F. The introduction of Li3PO4 as buffer layer is expected to help the cyclability of the electrodes as it allows a rapid Li-ion transport.

| S-EPMC4808834 | biostudies-literature

Long-term Cyclability of Substoichiometric Silicon Nitride Thin Film Anodes for Li-ion Batteries.

Project description:Silicon has been the subject of an extensive research effort aimed at developing new anode materials for lithium ion batteries due to its large specific and volumetric capacity. However, commercial use is limited by a number of degradation problems, many of which are related to the large volume change the material undergoes during cycling in combination with limited lithium-diffusivity. Silicon rich silicon oxides (SiOx), which converts into active silicon and inactive lithium oxide during the initial lithiation, have attracted some attention as a possible solution to these issues. In this work we present an investigation of silicon rich amorphous silicon nitride (a-SiNx) as an alternative convertible anode material. Amorphous SiN0.89 thin films deposited by plasma enhanced chemical vapour deposition show reversible reactions with lithium when cycled between 0.05 and 1.0 V vs. Li+/Li. This material delivers a reversible capacity of approximately 1,200 mAh/g and exhibits excellent cycling stability, with 41 nm a-SiN0.89 thin film electrodes showing negligible capacity degradation over more than 2,400 cycles.

| S-EPMC5645470 | biostudies-literature

Thermal synthesis of conversion-type bismuth fluoride cathodes for high-energy-density Li-ion batteries.

Project description:Towards enhancement of the energy density of Li-ion batteries, BiF3 has recently attracted considerable attention as a compelling conversion-type cathode material due to its high theoretical capacity of 302 mAh g-1, average discharge voltage of ca. 3.0 V vs. Li+/Li, the low theoretical volume change of ca. 1.7% upon lithiation, and an intrinsically high oxidative stability. Here we report a facile and scalable synthesis of phase-pure and highly crystalline orthorhombic BiF3 via thermal decomposition of bismuth(III) trifluoroacetate at T = 300 °C under inert atmosphere. The electrochemical measurements of BiF3 in both carbonate (LiPF6-EC/DMC)- and ionic liquid-based (LiFSI-Pyr1,4TFSI) Li-ion electrolytes demonstrated that ionic liquids improve the cyclic stability of BiF3. In particular, BiF3 in 4.3 M LiFSI-Pyr1,4TFSI shows a high initial capacity of 208 mA g-1 and capacity retention of ca. 50% over at least 80 cycles at a current density of 30 mA g-1.

| S-EPMC9814757 | biostudies-literature

Anodes for Li-ion batteries prepared from microcrystalline silicon and enabled by binder's chemistry and pseudo-self-healing.

Project description:Silicon, while suffering from major degradation issues, has been recognized as a next promising material to replace currently used graphite in the anodes of Li-ion batteries. Several pathways to mitigate the capacity fading of silicon has been proposed, including optimization of the electrode composition. Within the present work we evaluated different binder formulations to improve the long-term performance of the Li-ion batteries' anodes based on industrial grade silicon (Si) which is typically characterized by a particle sizes ranging from 100 nm to 5.5 microns. The decrease of pH in a binder formulation was found to detrimental for the cycling performance of Si due to enhanced formation of an ester-type bonding between the carboxylic group of the binder and hydroxyl group on the Si surface as well as cross-linking. Furthermore, the present work was focused on the use of the industrial grade Si with very high loading of Si material (up to 80% by weight) to better highlight the effects of the surface chemistry of Si and its influence on the performance of Si-based anodes in Li-ion batteries. The tested system allowed to establish a pseudo self-healing effect that manifests itself through the restoration of the anode capacity by approximately 25% and initiates after approximately 20 cycles. The stabilization of the capacity is attributed to self-limiting lithiation process. Such effect is closely related to SEI formation and transport properties of an electrode prepared from silicon of industrial grade.

| S-EPMC7413325 | biostudies-literature

0D-1D Hybrid Silicon Nanocomposite as Lithium-Ion Batteries Anodes.

Project description:Lithium ion batteries (LIBs) are the enabling technology for many of the societal changes that are expected to happen in the following years. Among all the challenges for which LIBs are the key, vehicle electrification is one of the most crucial. Current battery materials cannot provide the required power densities for such applications and therefore, it makes necessary to develop new materials. Silicon is one of the proposed as next generation battery materials, but still there are challenges to overcome. Poor capacity retention is one of those drawbacks, and because it is tightly related with its high capacity, it is a problem rather difficult to address with common and scalable fabrication processes. Here we show that combining 0D and 1D silicon nanostructures, high capacity and stability can be achieved even using standard electrode fabrication processes. Capacities as high as 1200 mAh/g for more than 500 cycles at high current densities (2 A/g) were achieved with the produced hybrid 0D/1D electrodes. In this research, it was shown that while 0D nanostructures provide good strain relaxation capabilities, 1D nanomaterials contribute with enhanced cohesion and conductive matrix integrity.

| S-EPMC7153466 | biostudies-literature

Bio-Derived, Binderless, Hierarchically Porous Carbon Anodes for Li-ion Batteries.

Project description:Here we explore the electrochemical performance of pyrolyzed skins from the species A. bisporus, also known as the Portobello mushroom, as free-standing, binder-free, and current collector-free Li-ion battery anodes. At temperatures above 900 °C, the biomass-derived carbon nanoribbon-like architectures undergo unique processes to become hierarchically porous. During heat-treatment, the oxygen and heteroatom-rich organics and potassium compounds naturally present in the mushroom skins play a mutual role in creating inner void spaces throughout the resulting carbon nanoribbons, which is a process analogous to KOH-activation of carbon materials seen in literature. The pores formed in the pyrolytic carbon nanoribbons range in size from sub-nanometer to tens of nanometers, making the nanoribbons micro, meso, and macroporous. Detailed studies were conducted on the carbon nanoribbons using SEM and TEM to study morphology, as well as XRD and EDS to study composition. The self-supporting nanoribbon anodes demonstrate significant capacity increase as they undergo additional charge/discharge cycles. After a pyrolysis temperature of 1100 °C, the pristine anodes achieve over 260 mAh/g after 700 cycles and a Coulombic efficiency of 101.1%, without the use of harmful solvents or chemical activation agents.

| S-EPMC4586494 | biostudies-other

Eco-friendly nitrogen-containing carbon encapsulated LiMn2O4 cathodes to enhance the electrochemical properties in rechargeable Li-ion batteries.

Project description:This study describes the synthesis of nitrogen-containing carbon (N-C) and an approach to apply the N-C material as a surface encapsulant of LiMn2O4 (LMO) cathode material. The N heteroatoms in the N-C material improve the electrochemical performance of LMO. A low-cost wet coating method was used to prepare N-C@LMO particles. The N-C@LMO was characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA), high-resolution Raman spectroscopy (HR-Raman), field emission scanning electron microscopy (FE-SEM), and field emission scanning transmission electron microscopy (FE-TEM) with elemental mapping. Furthermore, the prepared samples were electrochemically studied using the AC electrochemical impedance spectroscopy (EIS) and the electrochemical cycler. XPS suggested that the N-C coating greatly reduced the dissolution of Mn and EIS showed that the coating greatly suppressed the charge transfer resistance, even after long-term cycling. The control of Mn dissolution and inner resistance allowed faster Li-ion transport between the two electrodes resulting in improved discharge capacity and cycling stability.

| S-EPMC4942828 | biostudies-literature

Phosphorus-doped silicon nanorod anodes for high power lithium-ion batteries.

Project description:Heavy-phosphorus-doped silicon anodes were fabricated on CuO nanorods for application in high power lithium-ion batteries. Since the conductivity of lithiated CuO is significantly better than that of CuO, after the first discharge, the voltage cut-off window was then set to the range covering only the discharge-charge range of Si. Thus, the CuO core was in situ lithiated and acts merely as the electronic conductor in the following cycles. The Si anode presented herein exhibited a capacity of 990 mAh/g at the rate of 9 A/g after 100 cycles. The anode also presented a stable rate performance even at a current density as high as 20 A/g.

| S-EPMC5301996 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data