A gain series method for accurate EMCCD calibration.
Ontology highlight
ABSTRACT:
SUBMITTER: Ryan DP
PROVIDER: S-EPMC8443689 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:In structure light measurement systems or 3D printing systems, the errors caused by optical distortion of a digital projector always affect the precision performance and cannot be ignored. Existing methods to calibrate the projection distortion rely on calibration plate and photogrammetry, so the calibration performance is largely affected by the quality of the plate and the imaging system. This paper proposes a new projector calibration approach that makes use of photodiodes to directly detect the light emitted from a digital projector. By analyzing the output sequence of the photoelectric module, the pixel coordinates can be accurately obtained by the curve fitting method. A polynomial distortion representation is employed to reduce the residuals of the traditional distortion representation model. Experimental results and performance evaluation show that the proposed calibration method is able to avoid most of the disadvantages in traditional methods and achieves a higher accuracy. This proposed method is also practically applicable to evaluate the geometric optical performance of other optical projection system.
| S-EPMC4634452 | biostudies-literature
Project description:Integrating quantitative morphological and qualitative
molecular methods to analyze soil nematode community
responses to plant range expansion
| PRJEB24755 | ENA
Project description:A standard paradigm of localization microscopy involves extension from two to three dimensions by engineering information into emitter images, and approximation of errors resulting from the field dependence of optical aberrations. We invert this standard paradigm, introducing the concept of fully exploiting the latent information of intrinsic aberrations by comprehensive calibration of an ordinary microscope, enabling accurate localization of single emitters in three dimensions throughout an ultrawide and deep field. To complete the extraction of spatial information from microscale bodies ranging from imaging substrates to microsystem technologies, we introduce a synergistic concept of the rigid transformation of the positions of multiple emitters in three dimensions, improving precision, testing accuracy, and yielding measurements in six degrees of freedom. Our study illuminates the challenge of aberration effects in localization microscopy, redefines the challenge as an opportunity for accurate, precise, and complete localization, and elucidates the performance and reliability of a complex microelectromechanical system.
| S-EPMC8225824 | biostudies-literature
Project description:High-field (≥ 3T) MRI provides a means to increase the signal-to-noise ratio, due to its higher tissue magnetization compared with 1.5T. However, both the static magnetic field (B(0)) and the transmit radio-frequency (RF) field (B 1+) inhomogeneities are comparatively higher at higher field strengths than those at 1.5T. These challenging factors at high-field strengths make it more difficult to accurately calibrate the transmit RF gain using standard RF calibration procedures. An image-based RF calibration procedure was therefore developed, in order to accurately calibrate the transmit RF gain within a specific region-of-interest (ROI). Using a turbo fast low-angle shot (TurboFLASH) pulse sequence with centric k-space reordering, a series of 'saturation-no-recovery' images was acquired by varying the flip angle of the preconditioning pulse. In the resulting images, the signal null occurs in regions where the flip angle of the preconditioning pulse is 90°. For a given ROI, the mean signal can be plotted as a function of the nominal flip angle, and the resulting curve can be used to quantitatively identify the signal null. This image-guided RF calibration procedure was evaluated through phantom and volunteer imaging experiments at 3T and 7T. The image-guided RF calibration results in vitro were consistent with standard B(0) and B 1+ maps. The standard automated RF calibration procedure produced approximately 20% and 15-30% relative error in the transmit RF gain in the left kidney at 3T and brain at 7T, respectively. For initial application, a T(2) mapping pulse sequence was applied at 7T. The T(2) measurements in the thalamus at 7T were 60.6 ms and 48.2 ms using the standard and image-guided RF calibration procedures, respectively. This rapid, image-guided RF calibration procedure can be used to optimally calibrate the flip angle for a given ROI and thus minimize measurement errors for quantitative MRI and MR spectroscopy.
| S-EPMC2988285 | biostudies-other
Project description:Measurement and calibration of an analog-to-digital converter (ADC) using a histogram-based method requires a large volume of data and a long test duration, especially for a high resolution ADC. A fast and accurate calibration method for pipelined ADCs is proposed in this research. The proposed calibration method composes histograms through the outputs of each stage and calculates error sources. The digitized outputs of a stage are influenced directly by the operation of the prior stage, so the results of the histogram provide the information of errors in the prior stage. The composed histograms reduce the required samples and thus calibration time being implemented by simple modules. For 14-bit resolution pipelined ADC, the measured maximum integral non-linearity (INL) is improved from 6.78 to 0.52 LSB, and the spurious-free dynamic range (SFDR) and signal-to-noise-and-distortion ratio (SNDR) are improved from 67.0 to 106.2dB and from 65.6 to 84.8dB, respectively.
| S-EPMC4466524 | biostudies-literature
Project description:Predictive models that accurately emulate complex scientific processes can achieve speed-ups over numerical simulators or experiments and at the same time provide surrogates for improving the subsequent analysis. Consequently, there is a recent surge in utilizing modern machine learning methods to build data-driven emulators. In this work, we study an often overlooked, yet important, problem of choosing loss functions while designing such emulators. Popular choices such as the mean squared error or the mean absolute error are based on a symmetric noise assumption and can be unsuitable for heterogeneous data or asymmetric noise distributions. We propose Learn-by-Calibrating, a novel deep learning approach based on interval calibration for designing emulators that can effectively recover the inherent noise structure without any explicit priors. Using a large suite of use-cases, we demonstrate the efficacy of our approach in providing high-quality emulators, when compared to widely-adopted loss function choices, even in small-data regimes.
| S-EPMC7648787 | biostudies-literature
Project description:A novel calibration method based on polar coordinate is proposed. The world coordinates are expressed in the form of polar coordinates, which are converted to world coordinates in the calibration process. In the beginning, the calibration points are obtained in polar coordinates. By transformation between polar coordinates and rectangular coordinates, the points turn into form of rectangular coordinates. Then, the points are matched with the corresponding image coordinates. At last, the parameters are obtained by objective function optimization. By the proposed method, the relationships between objects and cameras are expressed in polar coordinates easily. It is suitable for multi-camera calibration. Cameras can be calibrated with fewer points. The calibration images can be positioned according to the location of cameras. The experiment results demonstrate that the proposed method is an efficient calibration method. By the method, cameras are calibrated conveniently with high accuracy.
| S-EPMC5087901 | biostudies-literature
Project description:The need to calibrate to correct for sensor-to-sensor fabrication variation and sensor drift has proven a significant hurdle in the widespread use of biosensors. To maintain clinically relevant (±20% for this application) accuracy, for example, commercial continuous glucose monitors require recalibration several times a day, decreasing convenience and increasing the chance of user errors. Here, however, we demonstrate a "dual-frequency" approach for achieving the calibration-free operation of electrochemical biosensors that generate an output by using square-wave voltammetry to monitor binding-induced changes in electron transfer kinetics. Specifically, we use the square-wave frequency dependence of their response to produce a ratiometric signal, the ratio of peak currents collected at responsive and non- (or low) responsive square-wave frequencies, which is largely insensitive to drift and sensor-to-sensor fabrication variations. Using electrochemical aptamer-based (E-AB) biosensors as our test bed, we demonstrate the accurate and precise operation of sensors against multiple drugs, achieving accuracy in the measurement of their targets of within better than 20% across dynamic ranges of up to 2 orders of magnitude without the need to calibrate each individual sensor.
| S-EPMC6519131 | biostudies-literature
Project description:The standard method for the calibration of audiometric bone vibrators requires the use of an artificial mastoid, a device that converts vibratory energy to an electrical analog. The mechanical input impedance of the device is designed to represent the average mechanical impedance of the human head. For calibration purposes, it is not necessary that the coupling device represent the impedance of the head. It is only necessary that it provides a repeatable measurement of the output of the vibrator that can be related to the normal threshold of hearing at each test frequency. In addition to the mechanical output that serves as the stimulus for the hearing test, bone vibrators produce an acoustic signal that is proportional to the mechanical force delivered to the head. By determining the transfer function relating the acoustic sound pressure to the mechanical force, the acoustic signal can serve as a proxy for the vibratory stimulus. This article describes the design and validation of an acoustic coupler for the calibration of audiometric bone vibrators.
| S-EPMC3292602 | biostudies-other
Project description:Online calibration technique has been widely employed to calibrate new items due to its advantages. Method A is the simplest online calibration method and has attracted many attentions from researchers recently. However, a key assumption of Method A is that it treats person-parameter estimates ?^s (obtained by maximum likelihood estimation [MLE]) as their true values ?s , thus the deviation of the estimated ?^s from their true values might yield inaccurate item calibration when the deviation is nonignorable. To improve the performance of Method A, a new method, MLE-LBCI-Method A, is proposed. This new method combines a modified Lord's bias-correction method (named as maximum likelihood estimation-Lord's bias-correction with iteration [MLE-LBCI]) with the original Method A in an effort to correct the deviation of ?^s which may adversely affect the item calibration precision. Two simulation studies were carried out to explore the performance of both MLE-LBCI and MLE-LBCI-Method A under several scenarios. Simulation results showed that MLE-LBCI could make a significant improvement over the ML ability estimates, and MLE-LBCI-Method A did outperform Method A in almost all experimental conditions.
| S-EPMC5978521 | biostudies-literature