Environmental and Economic Viability of Chitosan Production in Guayas-Ecuador: A Robust Investment and Life Cycle Analysis.
Ontology highlight
ABSTRACT:
SUBMITTER: Riofrio A
PROVIDER: S-EPMC8444200 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:The bio-based production of aromatics is experiencing a renaissance with systems and synthetic biology approaches promising to deliver bio-catalysts that will reach yields, rates, and titers comparable to already existing bulk bio-processes for the production of amino acids for instance. However, aromatic building blocks derived from petrochemical routes have a huge economic advantage, they are cheap, and very cheap in fact. In this article, we are trying to shed light on an important aspect of biocatalyst development that is frequently overlooked when working on strain development: economic and environmental impact of the production process. We estimate the production cost and environmental impact of a microbial fermentation process depending on culture pH, carbon source and process scale. As a model molecule we use para-hydroxybenzoic acid (pHBA), but the results are readily transferrable to other shikimate derived aromatics with similar carbon yields and production rates.
| S-EPMC7237583 | biostudies-literature
Project description:BACKGROUND: Microalgae are touted as an attractive alternative to traditional forms of biomass for biofuel production, due to high productivity, ability to be cultivated on marginal lands, and potential to utilize carbon dioxide (CO2) from industrial flue gas. This work examines the fossil energy return on investment (EROIfossil), greenhouse gas (GHG) emissions, and direct Water Demands (WD) of producing dried algal biomass through the cultivation of microalgae in Open Raceway Ponds (ORP) for 21 geographic locations in the contiguous United States (U.S.). For each location, comprehensive life cycle assessment (LCA) is performed for multiple microalgal biomass production pathways, consisting of a combination of cultivation and harvesting options. RESULTS: Results indicate that the EROIfossil for microalgae biomass vary from 0.38 to 1.08 with life cycle GHG emissions of -46.2 to 48.9 (g CO2 eq/MJ-biomass) and direct WDs of 20.8 to 38.8 (Liters/MJ-biomass) over the range of scenarios analyzed. Further anaylsis reveals that the EROIfossil for production pathways is relatively location invariant, and that algae's life cycle energy balance and GHG impacts are highly dependent on cultivation and harvesting parameters. Contrarily, algae's direct water demands were found to be highly sensitive to geographic location, and thus may be a constraining factor in sustainable algal-derived biofuel production. Additionally, scenarios with promising EROIfossil and GHG emissions profiles are plagued with high technological uncertainty. CONCLUSIONS: Given the high variability in microalgae's energy and environmental performance, careful evaluation of the algae-to-fuel supply chain is necessary to ensure the long-term sustainability of emerging algal biofuel systems. Alternative production scenarios and technologies may have the potential to reduce the critical demands of biomass production, and should be considered to make algae a viable and more efficient biofuel alternative.
| S-EPMC3693881 | biostudies-other
Project description:BackgroundHuman health is dependent upon environmental health. Air pollution is a leading cause of morbidity and mortality globally, and climate change has been identified as the single greatest public health threat of the 21st century. As a large, resource-intensive sector of the Canadian economy, healthcare itself contributes to pollutant emissions, both directly from facility and vehicle emissions and indirectly through the purchase of emissions-intensive goods and services. Together these are termed life cycle emissions. Here, we estimate the extent of healthcare-associated life cycle emissions as well as the public health damages they cause.Methods and findingsWe use a linked economic-environmental-epidemiological modeling framework to quantify pollutant emissions and their implications for public health, based on Canadian national healthcare expenditures over the period 2009-2015. Expenditures gathered by the Canadian Institute for Health Information (CIHI) are matched to sectors in a national environmentally extended input-output (EEIO) model to estimate emissions of greenhouse gases (GHGs) and >300 other pollutants. Damages to human health are then calculated using the IMPACT2002+ life cycle impact assessment model, considering uncertainty in the damage factors used. On a life cycle basis, Canada's healthcare system was responsible for 33 million tonnes of carbon dioxide equivalents (CO2e), or 4.6% of the national total, as well as >200,000 tonnes of other pollutants. We link these emissions to a median estimate of 23,000 disability-adjusted life years (DALYs) lost annually from direct exposures to hazardous pollutants and from environmental changes caused by pollution, with an uncertainty range of 4,500-610,000 DALYs lost annually. A limitation of this national-level study is the use of aggregated data and multiple modeling steps to link healthcare expenditures to emissions to health damages. While informative on a national level, the applicability of these findings to guide decision-making at individual institutions is limited. Uncertainties related to national economic and environmental accounts, model representativeness, and classification of healthcare expenditures are discussed.ConclusionsOur results for GHG emissions corroborate similar estimates for the United Kingdom, Australia, and the United States, with emissions from hospitals and pharmaceuticals being the most significant expenditure categories. Non-GHG emissions are responsible for the majority of health damages, predominantly related to particulate matter (PM). This work can guide efforts by Canadian healthcare professionals toward more sustainable practices.
| S-EPMC6067712 | biostudies-literature
Project description:Caproic acid is an emerging platform chemical with diverse applications. Recently, a novel biorefinery process, that is, chain elongation, was developed to convert mixed organic waste and ethanol into renewable caproic acids. In the coming years, this process may become commercialized, and continuing to improve on the basis of numerous ongoing technological and microbiological studies. This study aims to analyze the environmental performance of caproic acid production from mixed organic waste via chain elongation at this current, early stage of technological development. To this end, a life cycle assessment (LCA) was performed to evaluate the environmental impact of producing 1 kg caproic acid from organic waste via chain elongation, in both a lab-scale and a pilot-scale system. Two mixed organic waste were used as substrates: the organic fraction of municipal solid waste (OFMSW) and supermarket food waste (SFW). Ethanol use was found to be the dominant cause of environmental impact over the life cycle. Extraction solvent recovery was found to be a crucial uncertainty that may have a substantial influence on the life-cycle impacts. We recommend that future research and industrial producers focus on the reduction of ethanol use in chain elongation and improve the recovery efficiency of the extraction solvent.
| S-EPMC5480234 | biostudies-literature
Project description:The environmental performance of cow milk produced in a conventional semi-intensive system was assessed using a cradle-to-farm gate attributional life cycle assessment. The impacts of 1 kg FPCM-fat and protein corrected milk were obtained considering six midpoint impact categories from the ReCiPe 2016 method: climate change (CC), terrestrial acidification (TA), freshwater eutrophication (FE), land use (LU), water consumption (WC), and fossil resource scarcity (FRS). The modeling of the product system and calculating the environmental impacts considered the use of SimaPro™ software. Enteric methane and nitrogen emissions and inputs for feeding animals (fertilization for pasture production, use of seed in corn crops, and milk replacer in calves feed) were the main contributors to impacts in milk production in most categories. In addition, the indirect energy use and wastewater generation in milking and milk cooling also were relevant. Literature-based strategies are suggested to mitigate the identified environmental impacts to achieve the best environmental performance without decreasing technical and quality milk production. We emphasize the importance of improving productivity per milk cow, knowing the origin of the supply chain inputs, and using it efficiently to produce animal feeds as the main strategies to improve milk's environmental performance. Changes in allocation methods did not substantially differ in impact categories. Sensitivity analysis foregrounds the consistency of results and conclusions of the current study despite the uncertainties associated with methodological choices, simplifications, suppositions, and the use and adaptation of international databases.
| S-EPMC8576314 | biostudies-literature
Project description:A growing world population with increasing levels of food consumption will lead to more dairy and swine production and increasing amount of manure that requires treatment. Discharge of excessive nutrients and carbon in untreated animal manure can lead to greenhouse gas emissions and eutrophication concerns, and treatment efforts can be expensive for small scale farmers in marginalized communities. The overall goal of this study was to determine the environmental and economic sustainability of four animal manure management scenarios in Costa Rica: (1) no treatment, (2) biodigesters, (3) biodigesters and struvite precipitation, and (4) biodigesters, struvite precipitation, and lagoons. Life cycle assessment was used to assess the carbon footprint and eutrophication potential, whereas life cycle cost analysis was used to evaluate the equivalent uniform annual worth over the construction and operation and maintenance life stages. Recovery of biogas as a cooking fuel and recovery of nutrients from the struvite reactor reduced the carbon footprint, leading to carbon offsets of up to 2,500 kg CO2 eq/year. Offsets were primarily due to avoiding methane emissions during energy recovery. Eutrophication potential decreased as resource recovery processes were integrated, primarily due to improved removal of phosphorus in effluent waters. Resource recovery efforts led to equivalent uniform annual benefits of $825 to $1,056/year, which could provide a helpful revenue source for lower-income farmers. This research can provide clarity on how small-scale farmers in marginalized settings can utilize resource recovery technologies to better manage animal manure, while improving economic and environmental sustainability outcomes.
| S-EPMC8165466 | biostudies-literature
Project description:The bioethanol is playing an increasingly important role in renewable energy in China. Based on the theory of circular economy, integration of different resources by polygeneration is one of the solutions to improve energy efficiency and to reduce environmental impact. In this study, three modes of bioethanol production were selected to evaluate the life cycle energy efficiency and environmental impact of sweet potato-based bioethanol. The results showed that, the net energy ratio was greater than 1 and the value of net energy gain was positive in the three production modes, in which the maximum value appeared in the circular economy mode (CEM). The environment emission mainly occurred to bioethanol conversion unit in the conventional production mode (CPM) and the cogeneration mode (CGM), and eutrophication potential (EP) and global warming potential (GWP) were the most significant environmental impact category. While compared with CPM and CGM, the environmental impact of CEM significantly declined due to increasing recycling, and plant cultivation unit mainly contributed to EP and GWP. And the comprehensive evaluation score of environmental impact decreased by 73.46% and 23.36%. This study showed that CEM was effective in improving energy efficiency, especially in reducing the environmental impact, and it provides a new method for bioethanol production.
| S-EPMC5495513 | biostudies-literature
Project description:Many households display inertia in investment management over their life cycles. Our calibrated dynamic life cycle portfolio choice model can account for such an apparently 'irrational' outcome, by incorporating the fact that investors must forgo acquiring job-specific skills when they spend time managing their money, and their efficiency in financial decision making varies with age. Resulting inertia patterns mesh well with findings from prior studies and our own empirical results from Panel Study of Income Dynamics (PSID) data. We also analyze how people optimally choose between actively managing their assets versus delegating the task to financial advisors. Delegation proves valuable to both the young and the old. Our calibrated model quantifies welfare gains from including investment time and money costs as well as delegation in a life cycle setting.
| S-EPMC5363991 | biostudies-literature
Project description:Background:The need for liquid fuels in the transportation sector is increasing, and it is essential to develop industrially sustainable processes that simultaneously address the tri-fold sustainability metrics of technological feasibility, economic viability, and environmental impacts. Biorefineries based on lignocellulosic feedstocks could yield high-value products such as ethyl acetate, dodecane, ethylene, and hexane. This work focuses on assessing biochemical and biomass to electricity platforms for conversion of Banagrass and Energycane into valuable fuels and chemicals using the tri-fold sustainability metrics. Results:The production cost of various products produced from Banagrass was $1.19/kg ethanol, $1.00/kg ethyl acetate, $3.01/kg dodecane (jet fuel equivalent), $2.34/kg ethylene and $0.32/kW-h electricity. The production cost of different products using Energycane as a feedstock was $1.31/kg ethanol, $1.11/kg ethyl acetate, $3.35/kg dodecane, and $2.62/kg ethylene. The sensitivity analysis revealed that the price of the main product, feedstock cost and cost of ethanol affected the profitability the overall process. Banagrass yielded 11% higher ethanol compared to Energycane, which could be attributed to the differences in the composition of these lignocellulosic biomass sources. Acidification potential was highest when ethylene was produced at the rate of 2.56 × 10-2 and 1.71 × 10-2 kg SO2 eq. for Banagrass and Energycane, respectively. Ethanol production from Banagrass and Energycane resulted in a global warming potential of - 12.3 and - 40.0 g CO2 eq./kg ethanol. Conclusions:Utilizing hexoses and pentoses from Banagrass to produce ethyl acetate was the most economical scenario with a payback period of 11.2 years and an ROI of 8.93%, respectively. Electricity production was the most unprofitable scenario with an ROI of - 29.6% using Banagrass/Energycane as a feedstock that could be attributed to high feedstock moisture content. Producing ethylene or dodecane from either of the feedstocks was not economical. The moisture content and composition of biomasses affected overall economics of the various pathways studied. Producing ethanol and ethyl acetate from Energycane had a global warming potential of - 3.01 kg CO2 eq./kg ethyl acetate.
| S-EPMC5686913 | biostudies-literature
Project description:Wind power plants during generation of electricity emit almost no detrimental substances into the milieu. Nonetheless, the procedure of extraction of raw materials, production of elements and post-use management carry many negative environmental consequences. Wind power plant blades are mainly made of polymer materials, which cause a number of problems during post-use management. Controlling the system and the environment means such a transformation of their inputs in time that will ensure the achievement of the goal of this system or the state of the environment. Transformations of control of system and environment inputs, for example, blades production, are describing various models which in the research methodology, like LCA (Life Cycle Assessment), LCM (Life Cycle Management), LCI (Life Cycle Inventory), etc. require meticulous grouping and weighing of life cycle variables of polymer materials. The research hypothesis was assuming, in this paper, that the individual post-production waste of wind power plant blades is characterized by a different potential impact on the environment. For this reason, the aim of this publication is to conduct an ecological and energy life cycle analysis, evaluation, steering towards minimization and development (positive progress) of selected polymer waste produced during the manufacture of wind power plant blades. The analyzes were based on the LCA method. The subject of the research was eight types of waste (fiberglass mat, roving fabric, resin discs, distribution hoses, spiral hoses with resin, vacuum bag film, infusion materials residues and surplus mater), which are most often produced during the production of blades. Eco-indicator 99 and CED (Cumulative Energy Demand) were used as the computation procedures. The influence of the analyzed objects on human health, ecosystem quality and resources was appraised. Amidst the considered wastes, the highest level of depreciating impact on the milieu was found in the life cycle of resin discs (made of epoxy resin). The application of recycling processes would decrease the depreciating environmental influence in the context of the total life cycle of all analyzed waste. Based on the outcome of the analyzes, recommendations were proposed for the environmentally friendly post-use management of wind power plant blades, that can be used to develop new blade manufacturing techniques that better fit in with sustainable development and the closed-cycle economy.
| S-EPMC8434586 | biostudies-literature