Browse
Submit Data
Databases
API
Help

Dataset Information

23 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

KNbO₃/ZnO heterojunction harvesting ultrasonic mechanical energy and solar energy to efficiently degrade methyl orange.

ABSTRACT: In this paper, KNbO₃/ZnO nanocomposite was synthesized and used in piezo/photocatalytic degradation of methyl orange (MO) under simulated sunlight and ultrasonic vibration. Under simulated solar light, the optimal KNbO₃/ZnO sample presented a MO degradation rate of 0.047 min^-1, which is 2.47 times higher than that of ZnO. The promotion effect of KNbO₃ on ZnO was also observed in the piezoelectric catalytic reaction. In addition, the co-utilization of solar and mechanical energy can further increase the MO degradation rate. Piezoelectric property and photoresponse capability are the origins of the piezo/photo catalytic behavior of the KNbO₃/ZnO composite. Owing to the different band potentials of KNbO₃ and ZnO, the electric potential field at their interface can drive the second distribution of the photo/piezoinduced charge carriers and hence promote the photo/piezocatalytic activity. This phenomenon was verified by the analysis on transient photocurrent and piezocurrent response. Trapping experiments on reactive species were also conducted. Superoxide radicals, holes, and hydroxyl radicals were found to be the main reactive species during the photo/piezocatalytic reaction. Recycling test showed that the KNbO₃/ZnO composite exhibited good catalytic stability during six consecutive uses. Given its advantages of good catalytic activity and stability, the synthesized KNbO₃/ZnO nanocomposite material has great potential in the further use of solar and mechanical energy to develop new water purification technologies.

SUBMITTER: Li Y

PROVIDER: S-EPMC8445898 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Integration of a Cu2O/ZnO heterojunction and Ag@SiO2 into a photoanode for enhanced solar water oxidation.

Project description:Photoelectrochemical water splitting (PEC-WS) has attracted considerable attention owing to its low energy consumption and sustainable nature. Constructing semiconductor heterojunctions with controllable band structure can effectively facilitate photogenerated carrier separation. In this study, a FTO/ZnO/Cu2O/Ag@SiO2 photoanode with a Cu2O/ZnO p-n heterojunction and Ag@SiO2 nanoparticles is constructed to investigate its PEC-WS performance. Compared with a bare ZnO photoanode, the photocurrent density of the FTO/ZnO/Cu2O/Ag@SiO2 photoanode (0.77 mA cm-2) at 1.23 VRHE exhibits an increment of 88%, and a cathodic shift of 0.1 V for the on-set potential (0.4 VRHE). Detailed photoelectrochemical analyses reveal that the Cu2O/ZnO p-n heterojunction formed between Cu2O and ZnO can effectively promote photogenerated carrier separation. The surface plasmonic effect of the Ag@SiO2 nanoparticles can further promote the photogenerated carrier transfer efficiency, which synergistically improves the PEC-WS performance.

| S-EPMC10836412 | biostudies-literature

Novel application of Ag/PbBiO2I nanocomposite in piezocatalytic degradation of rhodamine B via harvesting ultrasonic vibration energy.

Project description:Ag/PbBiO2I nanocomposite was synthesized and firstly applied in piezocatalytic degradation of rhodamine B (RhB) under ultrasonic vibration. The two-dimensional structure endows PbBiO2I nanosheets piezoelectric property, so that it can drive the piezocatalytic reaction under ultrasonic vibration. The loading of Ag nanoparticles forms Schottky barriers between the Ag-PbBiO2I contact region, which improves the separation of charge carriers and subsequently increases the piezocatalytic efficiency. The RhB degradation rate of the optimal Ag/PbBiO2I sample is 0.0165 min-1, which reaches 6.8 times that of pure PbBiO2I. This work indicates that the PbBiO2I nanosheet shows promising potential in utilizing ultrasonic vibration energy.

| S-EPMC8436069 | biostudies-literature

Photodeposition of CoOx nanoparticles on BiFeO3 nanodisk for efficiently piezocatalytic degradation of rhodamine B by utilizing ultrasonic vibration energy.

Project description:Piezoelectric materials have received much attention due to their great potential in environmental remediation by utilizing vibrational energy. In this paper, a novel piezoelectric catalyst, CoOx nanoparticles anchored BiFeO3 nanodisk composite, was intentionally synthesized via a photodeposition method and applied in piezocatalytic degradation of rhodamine B (RhB) under ultrasonic vibration. The as-synthesized CoOx/BiFeO3 composite presents high piezocatalytic efficiency and stability. The RhB degradation rate is determined to be 1.29 h-1, which is 2.38 folds higher than that of pure BiFeO3. Via optimizing the reaction conditions, the piezocatalytic degradation rate of the CoOx/BiFeO3 can be further increased to 3.20 h-1. A thorough characterization was implemented to investigate the structure, piezoelectric property, and charge separation efficiency of the CoOx/BiFeO3 to reveal the nature behind the high piezocatalytic activity. It is found that the CoOx nanoparticles are tightly adhered and uniformly dispersed on the surface of the BiFeO3 nanodisks. Strong interaction between CoOx and BiFeO3 triggers the formation of a heterojunction structure, which further induces the migration of the piezoinduced holes on the BiFeO3 to CoOx nanoparticles. The recombination of electron-hole pairs is retarded, thereby increasing the piezocatalytic performance greatly. This work may offer a new paradigm for the design of high-efficiency piezoelectric catalysts.

| S-EPMC8567443 | biostudies-literature

Multifunctional Magnetic Nanocolloids for Hybrid Solar-Thermoelectric Energy Harvesting.

Project description:Present environmental issues force the research to explore radically new concepts in sustainable and renewable energy production. In the present work, a functional fluid consisting of a stable colloidal suspension of maghemite magnetic nanoparticles in water was characterized from the points of view of thermoelectrical and optical properties, to evaluate its potential for direct electricity generation from thermoelectric effect enabled by the absorption of sunlight. These nanoparticles were found to be an excellent solar radiation absorber and simultaneously a thermoelectric power-output enhancer with only a very small volume fraction when the fluid was heated from the top. These findings demonstrate the investigated nanofluid's high promise as a heat transfer fluid for co-generating heat and power in brand new hybrid flat-plate solar thermal collectors where top-heating geometry is imposed.

| S-EPMC8074063 | biostudies-literature

Photoactive ZnO Materials for Solar Light-Induced CuxO-ZnO Catalyst Preparation.

Project description:In this work, the solar light-induced redox photoactivity of ZnO semiconductor material was used to prepare CuxO-ZnO composite catalysts at room temperature with a control of the chemical state of the copper oxide phase. Cu₂(I)O-ZnO and Cu(II)O-ZnO composite catalysts were prepared by using Cu(acac)₂ in tetrahydrofuran-water and Cu(NO₃)₂ in water as metallic precursor, respectively. Prior to the implementation of the photon-assisted synthesis method, the most efficient photoactive ZnO material was selected from among different ZnO materials prepared by the low temperature polyol and precipitation methods with carbonates and carbamates as precipitation agents. The photocatalytic degradation of the 4-chlorophenol compound in water under simulated solar light was taken as a model reaction. The ZnO support materials were characterized by X-ray diffraction (XRD), surface area and porosimetry measurements, thermogravimetric analysis (TGA), scanning electron microscopy (SEM) and transmission electron microscopy (TEM), and the synthesis method strongly influenced their photoactivity in terms of 4-chlorophenol degradation and of total organic carbon removal. The most photoactive ZnO material was prepared by precipitation with carbonates and calcined at 300 °C, benefitting from a high specific surface area and a small mean crystallite size for achieving a complete 4-chlorophenol mineralization within 70 min of reaction, with minimum Zn2+ released to the solution. Besides thermal catalysis applications, this work has opened a new route for the facile synthesis of Cu₂O-ZnO heterojunction photocatalysts that could take place under solar light of the heterojunction built between the p-type semi-conductor Cu₂O with direct visible light band gap and the ZnO semiconductor phase.

| S-EPMC6266916 | biostudies-literature

Highly Improved Solar Energy Harvesting for Fuel Production from CO2 by a Newly Designed Graphene Film Photocatalyst.

Project description:Our growing energy demands must be met by a sustainable supply with reduced carbon intensity. One of the most exciting prospects to realize this goal is the photocatalyst-biocatalyst integrated artificial photosynthesis system which affords solar fuel/chemicals in high selectivity from CO2. Graphene based photocatalysts are highly suitable for the system, but their industrial scale use requires immobilization for improved separation and recovery of the photocatalyst. Therefore for practical purposes, design and fabrication of film type graphene photocatalyst with higher solar energy conversion efficiency is an absolute necessity. As a means to achieve this, we report herein the successful development of a new type of flexible graphene film photocatalyst that leads to >225% rise in visible light harvesting efficiency of the resultant photocatalyst-biocatalyst integrated artificial photosynthesis system for highly selective solar fuel production from CO2 compared to conventional spin coated graphene film photocatalyst. It is an important step towards the design of a new pool of graphene film based photocatalysts for artificial photosynthesis of solar fuels from CO2.

| S-EPMC6233185 | biostudies-literature

Multibandgap quantum dot ensembles for solar-matched infrared energy harvesting.

Project description:As crystalline silicon solar cells approach in efficiency their theoretical limit, strategies are being developed to achieve efficient infrared energy harvesting to augment silicon using solar photons from beyond its 1100?nm absorption edge. Herein we report a strategy that uses multi-bandgap lead sulfide colloidal quantum dot (CQD) ensembles to maximize short-circuit current and open-circuit voltage simultaneously. We engineer the density of states to achieve simultaneously a large quasi-Fermi level splitting and a tailored optical response that matches the infrared solar spectrum. We shape the density of states by selectively introducing larger-bandgap CQDs within a smaller-bandgap CQD population, achieving a 40?meV increase in open-circuit voltage. The near-unity internal quantum efficiency in the optimized multi-bandgap CQD ensemble yielded a maximized photocurrent of 3.7?±?0.2?mA?cm-2. This provides a record for silicon-filtered power conversion efficiency equal to one power point, a 25% (relative) improvement compared to the best previously-reported results.

| S-EPMC6167381 | biostudies-literature

Solution-Processed One-Dimensional ZnO@CdS Heterojunction toward Efficient Cu2ZnSnS4 Solar Cell with Inverted Structure.

Project description:Kesterite Cu2ZnSnS4 (CZTS) semiconductor has been demonstrated to be a promising alternative absorber in thin film solar cell in virtue of its earth-abundant, non-toxic element, suitable optical and electrical properties. Herein, a low-cost and non-toxic method that based on the thermal decomposition and reaction of metal-thiourea-oxygen sol-gel complexes to synthesize CZTS thin film was developed. The low-dimensional ZnO@CdS heterojunction nano-arrays coupling with the as-prepared CZTS thin film were employed to fabricate a novel solar cell with inverted structure. The vertically aligned nanowires (NWs) allow facilitating the charge carrier collection/separation/transfer with large interface areas. By optimizing the parameters including the annealing temperature of CZTS absorber, the thickness of CdS buffer layer and the morphology of ZnO NWs, an open-circuit voltage (VOC) as high as 589?mV was obtained by such solar cell with inverted structure. The all-solution-processed technic allows the realization of CZTS solar cell with extremely low cost.

| S-EPMC5062431 | biostudies-literature

Plasmonic colloidosomes of black gold for solar energy harvesting and hotspots directed catalysis for CO2 to fuel conversion.

Project description:In this work, we showed the tuning of the catalytic behavior of dendritic plasmonic colloidosomes (DPCs) by plasmonic hotspots. A cycle-by-cycle solution-phase synthetic protocol yielded high-surface-area DPCs by controlled nucleation-growth of gold nanoparticles. These DPCs, which had varying interparticle distances and particle-size distribution, absorb light over the entire visible region as well as in the near-infrared region of the solar spectrum, transforming gold into black gold. They produced intense hotspots of localized electric fields as well as heat, which were quantified and visualized by Raman thermometry and electron energy loss spectroscopy plasmon mapping. These DPCs can be effectively utilized for the oxidation reaction of cinnamyl alcohol using pure oxygen as the oxidant, hydrosilylation of aldehydes, temperature jump assisted protein unfolding and purification of seawater to drinkable water via steam generation. Black gold DPCs also convert CO2 to methane (fuel) at atmospheric pressure and temperature, using solar energy.

| S-EPMC6625417 | biostudies-literature

A composite light-harvesting layer from photoactive polymer and halide perovskite for planar heterojunction solar cells.

Project description:A new route for fabrication of photoactive materials in organic-inorganic hybrid solar cells is presented in this report. Photoactive materials by blending a semiconductive conjugated polymer with an organolead halide perovskite were fabricated for the first time. The composite active layer was then used to make planar heterojunction solar cells with the PCBM film as the electron-acceptor. Photovoltaic performance of solar cells was investigated by J-V curves and external quantum efficiency spectra. We demonstrated that the incorporation of the conjugated photoactive polymer into organolead halide perovskites did not only contribute to the generation of charges, but also enhance stability of solar cells by providing a barrier protection to halide perovskites. It is expected that versatile of conjugated semi-conductive polymers and halide perovskites in photoactive properties enables to create various combinations, forming composites with advantages offered by both types of photoactive materials.

| S-EPMC4944171 | biostudies-literature