Reactive wear protection through strong and deformable oxide nanocomposite surfaces.
Ontology highlight
ABSTRACT:
SUBMITTER: Liu C
PROVIDER: S-EPMC8448869 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Magnesium has been trending of late in automobile, aerospace, defense, sports, electronic and biomedical sectors as it offers an advantage in light-weighting. In aluminum, titanium, and steel dominated aerospace and defense sectors, applications of Mg were banned/restricted until recently due to perceived easy ignition and inability to self-extinguish immediately. Strength is generally inversely related to ductility, weak texture and unrelated to ignition resistance, making it challenging to optimize all four concurrently in a material. We address this challenge by designing a low density (~1.76 g.cm-3) in-situ Mg nanocomposite. It is a resultant of a sequence of in-situ reactions during melt processing and extrusion. The in-situ formed Y2O3 nanoparticles exhibit coherency with matrix and lead to development of large amount of elastic and plastic strain fields around them. These nanoparticles and secondary phases (Mg2Ca and Mg2Y) are responsible for the nanocomposite's high tensile strength (~343 MPa). A weak texture mediated tensile ductility of 30% and compressive failure strain of 44% is observed. Further, the ignition temperature increased to 1045 °C (near the boiling point of Mg) due to the formation of protective surficial oxide layers aided by the presence of insulating Y2O3 nanoparticles, rendering the nanocomposite outperform other traditional commercial Mg-based materials.
| S-EPMC5935745 | biostudies-literature
Project description:Liquid crystals with molecules constrained to the tangent bundle of a curved surface show interesting phenomena resulting from the tight coupling of the elastic and bulk-free energies of the liquid crystal with geometric properties of the surface. We derive a thermodynamically consistent Landau-de Gennes-Helfrich model which considers the simultaneous relaxation of the Q-tensor field and the surface. The resulting system of tensor-valued surface partial differential equation and geometric evolution laws is numerically solved to tackle the rich dynamics of this system and to compute the resulting equilibrium shape. The results strongly depend on the intrinsic and extrinsic curvature contributions and lead to unexpected asymmetric shapes.
| S-EPMC7544356 | biostudies-literature
Project description:We use interlinked 3D printed panels to fabricate deformable surfaces that are specifically designed for shape-changing displays. Our exploration of 3D printed deformable surfaces, as a fabrication technique for shape-changing displays, shows new and diverse forms of shape output, visualizations, and interaction capabilities. This article describes our general design and fabrication approach, the impact of varying surface design parameters, and a demonstration of possible application examples. We conclude by discussing current limitations and future directions for this work.
| S-EPMC7805960 | biostudies-literature
Project description:Studies of active matter-systems consisting of individuals or ensembles of internally driven and damped locomotors-are of interest to physicists studying nonequilibrium dynamics, biologists interested in individuals and swarm locomotion, and engineers designing robot controllers. While principles governing active systems on hard ground or within fluids are well studied, another class of systems exists at deformable interfaces. Such environments can display mixes of fluid-like and elastic features, leading to locomotor dynamics that are strongly influenced by the geometry of the surface, which, in itself, can be a dynamical entity. To gain insight into principles by which locomotors are influenced via a deformation field alone (and can influence other locomotors), we study robot locomotion on an elastic membrane, which we propose as a model of active systems on highly deformable interfaces. As our active agent, we use a differential driven wheeled robotic vehicle which drives straight on flat homogeneous surfaces, but reorients in response to environmental curvature. We monitor the curvature field-mediated dynamics of a single vehicle interacting with a fixed deformation as well as multiple vehicles interacting with each other via local deformations. Single vehicles display precessing orbits in centrally deformed environments, while multiple vehicles influence each other by local deformation fields. The active nature of the system facilitates a differential geometry-inspired mathematical mapping from the vehicle dynamics to those of test particles in a fictitious "spacetime," allowing further understanding of the dynamics and how to control agent interactions to facilitate or avoid multivehicle membrane-induced cohesion.
| S-EPMC9335302 | biostudies-literature
Project description:Friction and wear depend critically on surface roughness and its evolution with time. An accurate control of roughness is essential to the performance and durability of virtually all engineering applications. At geological scales, roughness along tectonic faults is intimately linked to stick-slip behaviour as experienced during earthquakes. While numerous experiments on natural, fractured, and frictional sliding surfaces have shown that roughness has self-affine fractal properties, much less is known about the mechanisms controlling the origins and the evolution of roughness. Here, by performing long-timescale molecular dynamics simulations and tracking the roughness evolution in time, we reveal that the emergence of self-affine surfaces is governed by the interplay between the ductile and brittle mechanisms of adhesive wear in three-body contact, and is independent of the initial state.
| S-EPMC6408517 | biostudies-literature
Project description:Proportional to considerable progress in protein-drug conjugations, attention to the efficient peptide coupling reagents is being increased. Hence, in this study, a versatile heterogeneous nanoscale reagent is presented for chemical, biological, and medical purposes. A combination of silver and silica-coated iron oxide nanoparticles (Ag/Fe3O4) has been well functionalized with isothiazolone rings via a silver-modified Heck mechanism. An appropriate condition is provided for peptide bond formation through the surface interplay between silanol groups and the loaded isothiazolone rings. A logical mechanism including a series of successive covalent bonds onto the surface of Ag/Fe3O4 nanocomposites is suggested for this catalyzed peptide bond formation. Accurate comparisons have been made to obtain the optimum value of the nanocatalyst and suitable conditions. As an additional application, the biological activity of the desired product has also been investigated through antibacterial assay tests. The results showed that our desired product could also be used as an effective heterogeneous nanoscale antibacterial agent for different purposes. In this regard, all of the essential structural and practical analyses have been carried out and precisely interpreted.
| S-EPMC6649058 | biostudies-literature
Project description:Robustness of superhydrophobic materials has been gradually taken into consideration for practical applications; however, little attention has been paid to the impact resistance of the superhydrophobicity of the materials. The present study demonstrated a new route for improving the mechanical durability, especially the impact resistance, of the superhydrophobic materials. First, poly(styrene-co-butadiene)/poly(ethylene-vinyl acetate) (SBR/EVA) composite monoliths with microscale cellular structures were manufactured by vulcanization-foaming processes. Then the composite monoliths were treated with sandpaper to create nanostructures above the revealed micropores after removing the uppermost skin, forming micro/nanotextured surfaces and giving improvements in superhydrophobicity. Due to the elastomeric nature of SBR and EVA, the superhydrophobicity of the monoliths can be maintained even while the material is mechanically impacted or compressed, and wearing helps improvement or recovery of the superhydrophobicity because of the self-similarity of the cellular structure inside the monoliths. Additionally, the obtained superhydrophobic materials are resistant to acidic, alkali, and salt liquors as well as organic solvents and have easy healing capacity of superhydrophobicity with a simple sanding treatment when destroyed by exposure to oxygen plasma.
| S-EPMC6882102 | biostudies-literature
Project description:Composite hydrogels have gained great attention as three-dimensional (3D) printing biomaterials because of their enhanced intrinsic mechanical strength and bioactivity compared to pure hydrogels. In most conventional printing methods for composite hydrogels, particles are preloaded in ink before printing, which often reduces the printability of composite ink with little mechanical improvement due to poor particle-hydrogel interaction of physical mixing. In contrast, the in situ incorporation of nanoparticles into a hydrogel during 3D printing achieves uniform distribution of particles with remarkable mechanical reinforcement, while precursors dissolved in inks do not influence the printing process. Herein, we introduced a "printing in liquid" technique coupled with a hybridization process, which allows 3D freeform printing of nanoparticle-reinforced composite hydrogels. A viscoplastic matrix for this printing system provides not only support for printed hydrogel filaments but also chemical reactants to induce various reactions in printed objects for in situ modification. Nanocomposite hydrogel scaffolds were successfully fabricated through this 3D freeform printing of hyaluronic acid (HAc)-alginate (Alg) hydrogel inks through a two-step crosslinking strategy. The first ionic crosslinking of Alg provided structural stability during printing, while the secondary crosslinking of photo-curable HAc improved the mechanical and physiological stability of the nanocomposite hydrogels. For in situ precipitation during 3D printing, phosphate ions were dissolved in the hydrogel ink and calcium ions were added to the viscoplastic matrix. The composite hydrogels demonstrated a significant improvement in mechanical strength, biostability, as well as biological performance compared to pure HAc. Moreover, the multi-material printing of composites with different calcium phosphate contents was achieved by adjusting the ionic concentration of inks. Our method greatly accelerates the 3D printing of various functional or hybridized materials with complex geometries through the design and modification of printing materials coupled with in situ post-printing functionalization and hybridization in reactive viscoplastic matrices.
| S-EPMC7415863 | biostudies-literature
Project description:The generation of a living protective layer at the luminal surface of cardiovascular devices, composed of an autologous functional endothelium, represents the ideal solution to life-threatening, implant-related complications in cardiovascular patients. The initial evaluation of engineering strategies fostering endothelial cell adhesion and proliferation as well as the long-term tissue homeostasis requires in vitro testing in environmental model systems able to recapitulate the hemodynamic conditions experienced at the blood-to-device interface of implants as well as the substrate deformation. Here, we introduce the design and validation of a novel bioreactor system which enables the long-term conditioning of human endothelial cells interacting with artificial materials under dynamic combinations of flow-generated wall shear stress and wall deformation. The wall shear stress and wall deformation values obtained encompass both the physiological and supraphysiological range. They are determined through separate actuation systems which are controlled based on validated computational models. In addition, we demonstrate the good optical conductivity of the system permitting online monitoring of cell activities through live-cell imaging as well as standard biochemical post-processing. Altogether, the bioreactor system defines an unprecedented testing hub for potential strategies toward the endothelialization or re-endothelialization of target substrates.
| S-EPMC5150819 | biostudies-literature
Project description:Recently, CuZr-based bulk metallic glass (BMG) composites reinforced by the TRIP (transformation-induced plasticity) effect have been explored in attempt to accomplish an optimal of trade-off between strength and ductility. However, the design of such BMG composites with advanced mechanical properties still remains a big challenge for materials engineering. In this work, we proposed a technique of instantaneously and locally arc-melting BMG plate to artificially induce the precipitation of B2 crystals in the glassy matrix and then to tune mechanical properties. Through adjusting local melting process parameters (i.e. input powers, local melting positions, and distances between the electrode and amorphous plate), the size, volume fraction, and distribution of B2 crystals were well tailored and the corresponding formation mechanism was clearly clarified. The resultant BMG composites exhibit large compressive plasticity and high strength together with obvious work-hardening ability. This compelling approach could be of great significance for the steady development of metastable CuZr-based alloys with excellent mechanical properties.
| S-EPMC5304197 | biostudies-literature