Browse
Submit Data
Databases
API
Help

Dataset Information

32 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

An electron-deficient carbon current collector for anode-free Li-metal batteries.

ABSTRACT: The long-term cycling of anode-free Li-metal cells (i.e., cells where the negative electrode is in situ formed by electrodeposition on an electronically conductive matrix of lithium sourced from the positive electrode) using a liquid electrolyte is affected by the formation of an inhomogeneous solid electrolyte interphase (SEI) on the current collector and irregular Li deposition. To circumvent these issues, we report an atomically defective carbon current collector where multivacancy defects induce homogeneous SEI formation on the current collector and uniform Li nucleation and growth to obtain a dense Li morphology. Via simulations and experimental measurements and analyses, we demonstrate the beneficial effect of electron deficiency on the Li hosting behavior of the carbon current collector. Furthermore, we report the results of testing anode-free coin cells comprising a multivacancy defective carbon current collector, a Li_xNi_0.8Co_0.1Mn_0.1-based cathode and a nonaqueous Li-containing electrolyte solution. These cells retain 90% of their initial capacity for over 50 cycles under lean electrolyte conditions.

SUBMITTER: Kwon H

PROVIDER: S-EPMC8452779 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Electrospun 3D Structured Carbon Current Collector for Li/S Batteries.

Project description:Light weight carbon nanofibers (CNF) fabricated by a simple electrospinning method and used as a 3D structured current collector for a sulfur cathode. Along with a light weight, this 3D current collector allowed us to accommodate a higher amount of sulfur composite, which led to a remarkable increase of the electrode capacity from 200 to 500 mAh per 1 g of the electrode including the mass of the current collector. Varying the electrospinning solution concentration enabled obtaining carbonized nanofibers of uniform structure and controllable diameter from several hundred nanometers to several micrometers. The electrochemical performance of the cathode deposited on carbonized PAN nanofibers at 800 °C was investigated. An initial specific capacity of 1620 mAh g-1 was achieved with a carbonized PAN nanofiber (cPAN) current collector. It exhibited stable cycling over 100 cycles maintaining a reversible capacity of 1104 mAh g-1 at the 100th cycle, while the same composite on the Al foil delivered only 872 mAh g-1. At the same time, 3D structured CNFs with a highly developed surface have a very low areal density of 0.85 mg cm-2 (thickness of ~25 µm), which is lower for almost ten times than the commercial Al current collector with the same thickness (7.33 mg cm-2).

| S-EPMC7221739 | biostudies-literature

Electrolyte design combining fluoro- with cyano-substitution solvents for anode-free Li metal batteries.

Project description:Fluoro-substitution solvents have achieved great success in electrolyte engineering for high-energy lithium metal batteries, which, however, is beset by low solvating power, thermal and chemical instability, and possible battery swelling. Instead, we herein introduce cyanogen as the electron-withdrawing group to enhance the oxidative stability of ether solvents, in which cyanogen and ether oxygen form the chelating structure with Li+ not notably undermining the solvating power. Cyano-group strongly bonds with transition metals (TMs) of NCM811 cathode to attenuate the catalytic reactivity of TMs toward bulk electrolytes. Besides, a stable and uniform cathode-electrolyte interphase (CEI) inhibits the violent oxidation decomposition of electrolytes and guarantees the structural integrity of the NCM811 cathode. Also, a N-containing and LiF-rich solid-electrolyte interphase (SEI) in our electrolyte facilitates fast Li+ migration and dense Li deposition. Accordingly, our electrolyte enables a stable cycle of Li metal anode with Coulombic efficiency of 98.4% within 100 cycles. 81.8% capacity of 4.3 V NCM811 cathode remains after 200 cycles. Anode-free pouch cells with a capacity of 125 mAh maintain 76% capacity after 100 cycles, corresponding to an energy density of 397.5 Wh kg-1.

| S-EPMC10835072 | biostudies-literature

Methods to Improve Lithium Metal Anode for Li-S Batteries.

Project description:The lithium-sulfur (Li-S) battery has received a lot of attention because it is characterized by high theoretical energy density (2,600 Wh/kg) and low cost. Though many works on the "shuttle effect" of polysulfide have been investigated, lithium metal anode is a more challenging problem, which leads to a short life, low coulombic efficiency, and safety issues related to dendrites. As a result, the amelioration of lithium metal anode is an important means to improve the performance of lithium sulfur battery. In this paper, improvement methods on lithium metal anode for lithium sulfur batteries, including adding electrolyte additives, using solid, and/or gel polymer electrolyte, modifying separators, applying a protective coating, and providing host materials for lithium deposition, are mainly reviewed. In addition, some challenging problems, and further promising directions are also pointed out for future research and development of lithium metal for Li-S batteries.

| S-EPMC6914760 | biostudies-literature

Performance Study of MXene/Carbon Nanotube Composites for Current Collector- and Binder-Free Mg-S Batteries.

Project description:The realization of sustainable and cheap Mg-S batteries depends on significant improvements in cycling stability. Building on the immense research on cathode optimization from Li-S batteries, for the first time a beneficial role of MXenes for Mg-S batteries is reported. Through a facile, low-temperature vacuum-filtration technique, several novel current collector- and binder-free cathode films were developed, with either dipenthamethylene thiuram tetrasulfide (PMTT) or S8 nanoparticles as the source of redox-active sulfur. The importance of combining MXene with a high surface area co-host material, such as carbon nanotubes, was demonstrated. A positive effect of MXenes on the average voltage and reduced self-discharge was also discovered. Ascribed to the rich polar surface chemistry of Ti3 C2 Tx MXene, an almost doubling of the discharge capacity (530 vs. 290 mA h g-1 ) was achieved by using MXene as a polysulfide-confining interlayer, obtaining a capacity retention of 83 % after 25 cycles.

| S-EPMC8248395 | biostudies-literature

Sustained-Release Nanocapsules Enable Long-Lasting Stabilization of Li Anode for Practical Li-Metal Batteries.

Project description:A robust solid-electrolyte interphase (SEI) enabled by electrolyte additive is a promising approach to stabilize Li anode and improve Li cycling efficiency. However, the self-sacrificial nature of SEI forming additives limits their capability to stabilize Li anode for long-term cycling. Herein, we demonstrate nanocapsules made from metal-organic frameworks for sustained release of LiNO3 as surface passivation additive in commercial carbonate-based electrolyte. The nanocapsules can offer over 10 times more LiNO3 than the solubility of LiNO3. Continuous supply of LiNO3 by nanocapsules forms a nitride-rich SEI layer on Li anode and persistently remedies SEI during prolonged cycling. As a result, lifespan of thin Li anode in 50 μm, which experiences drastic volume change and repeated SEI formation during cycling, has been notably improved. By pairing with an industry-level thick LiCoO2 cathode, practical Li-metal full cell demonstrates a remarkable capacity retention of 90% after 240 cycles, in contrast to fast capacity drop after 60 cycles in LiNO3 saturated electrolyte.

| S-EPMC7770678 | biostudies-literature

Synchronous Healing of Li Metal Anode via Asymmetrical Bidirectional Current.

Project description:The creation of Li metal anodes while minimizing dendrite growth is an important challenge for developing high-energy density batteries. Dendrites can originate from an inhomogeneous charge distribution or an irregular substrate, and often, the way to suppress dendrite growth is to avoid their formation altogether (ion-uniform mechanism over a shelf time). Herein, we propose a different route to eliminate dendrite formation, called an asymmetrical bidirectional current mode (ABCM) of charging, leading to a healable Li metal anode and resulting in a positive feedback cycle. This mode allows for a stable cyclic performance and suppresses dendrite formation effectively (while holding the polarization ∼27 mV for over 1,000 h), and provides a better result than suppressing Li dendrites via weakening of the Li dendrite (ion-uniform mechanism). These results indicate that ABCM may be a promising way to stabilize the Li anode of Li metal batteries, without any chemical/physical modification of the anode.

| S-EPMC6957000 | biostudies-literature

Supercooled liquid sulfur maintained in three-dimensional current collector for high-performance Li-S batteries.

Project description:In lithium-sulfur (Li-S) chemistry, the electrically/ionically insulating nature of sulfur and Li2S leads to sluggish electron/ion transfer kinetics for sulfur species conversion. Sulfur and Li2S are recognized as solid at room temperature, and solid-liquid phase transitions are the limiting steps in Li-S batteries. Here, we visualize the distinct sulfur growth behaviors on Al, carbon, Ni current collectors and demonstrate that (i) liquid sulfur generated on Ni provides higher reversible capacity, faster kinetics, and better cycling life compared to solid sulfur; and (ii) Ni facilitates the phase transition (e.g., Li2S decomposition). Accordingly, light-weight, 3D Ni-based current collector is designed to control the deposition and catalytic conversion of sulfur species toward high-performance Li-S batteries. This work provides insights on the critical role of the current collector in determining the physical state of sulfur and elucidates the correlation between sulfur state and battery performance, which will advance electrode designs in high-energy Li-S batteries.

| S-EPMC7244266 | biostudies-literature

Sb Nanoparticles Embedded in the N-Doped Carbon Fibers as Binder-Free Anode for Flexible Li-Ion Batteries.

Project description:Antimony (Sb) is considered a promising anode for Li-ion batteries (LIBs) because of its high theoretical specific capacity and safe Li-ion insertion potential; however, the LIBs suffer from dramatic volume variation. The volume expansion results in unstable electrode/electrolyte interphase and active material exfoliation during lithiation and delithiation processes. Designing flexible free-standing electrodes can effectively inhibit the exfoliation of the electrode materials from the current collector. However, the generally adopted methods for preparing flexible free-standing electrodes are complex and high cost. To address these issues, we report the synthesis of a unique Sb nanoparticle@N-doped porous carbon fiber structure as a free-standing electrode via an electrospinning method and surface passivation. Such a hierarchical structure possesses a robust framework with rich voids and a stable solid electrolyte interphase (SEI) film, which can well accommodate the mechanical strain and avoid electrode cracks and pulverization during lithiation/delithiation processes. When evaluated as an anode for LIBs, the as-prepared nanoarchitectures exhibited a high initial reversible capacity (675 mAh g-1) and good cyclability (480 mAh g-1 after 300 cycles at a current density of 400 mA g-1), along with a superior rate capability (420 mA h g-1 at 1 A g-1). This work could offer a simple, effective, and efficient approach to improve flexible and free-standing alloy-based anode materials for high performance Li-ion batteries.

| S-EPMC9506069 | biostudies-literature

Dunaliella Salinas based Sn-carbon anode for high-performance Li-ion batteries.

Project description:Long life, high capacity, environmental friendliness and good rate performance are the most important elements in the research of lithium ion batteries (LIBs). In this paper, Sn-carbon composite electrode materials are prepared using Dunaliella Salinas based carbon (amorphous carbon) as an amorphous carbon precursor combined with tin. Hence, an amorphous carbon template enwrapped by Sn particles forms a core-shell structure (Sn-carbon composite), the annealed Dunaliella Salinas based carbon makes up the carbon core, and Sn particles form the shell of the material. The components of the materials, microstructure and electrochemical properties of LIBs were characterized and tested. The results show that the prepared Sn-carbon composite electrode materials have high purity and combine with amorphous carbon uniformly. The Sn-carbon composite exhibits excellent performance as a LIB anode, its discharge capacities of the 1st, 2nd, and 4th cycles are 1777.39, 944.15 and 722.46 mA h g-1 at a current density of 100 mA g-1, and the capacity is 619.09 mA h g-1 after stable cycling at a current density of 200 mA g-1. The capacity continues to rise at a high current density of 1000 mA g-1 and is 574.97 mA h g-1 at its maximum, demonstrating the excellent performance of the electrode.

| S-EPMC9044169 | biostudies-literature

A Lignin-Based Carbon Anode with Long-Cycle Stability for Li-Ion Batteries

Project description:Due to its wide source and low cost, biomass-based hard carbon is considered a valuable anode for lithium-ion batteries (LIBs). Lignins, as the second most abundant source in nature, are being intensively studied as candidate anode materials for next generation LIBs. However, direct carbonization of pure lignin usually leads to low specific surface area and porosity. In this paper, we design a porous carbon material from natural lignin assisted by sacrificing a metal–organic framework (MOF) as the template. The MOF nanoparticles can disperse the lignin particles uniformly and form abundant mesopores in the composites to offer fast transfer channels for Li+. The as-prepared carbon anode shows a high specific capacity of 420 mAh g−1 with the capacity retention of 99% after 300 cycles at 0.2 A g−1. Additionally, it keeps the capacity retention of 85% after long cycle of 1000 cycles, indicating the good application value of the designed anode in LIBs. The work provides a renewable and low-cost candidate anode and a feasible design strategy of the anode materials for LIBs.

| S-EPMC9820563 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data