Browse
Submit Data
Databases
API
Help

Dataset Information

23 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Universal Strategy for Improving Perovskite Photodiode Performance: Interfacial Built-In Electric Field Manipulated by Unintentional Doping.

ABSTRACT: Organic-inorganic halide perovskites have demonstrated significant light detection potential, with a performance comparable to that of commercially available photodetectors. In this study, a general design guideline, which is applicable to both inverted and regular structures, is proposed for high-performance perovskite photodiodes through an interfacial built-in electric field (E) for efficient carrier separation and transport. The interfacial E generated at the interface between the active and charge transport layers far from the incident light is critical for effective charge carrier collection. The interfacial E can be modulated by unintentional doping of the perovskite, whose doping type and density can be easily controlled by the post-annealing time and temperature. Employing the proposed design guideline, the inverted and regular perovskite photodiodes exhibit the external quantum efficiency of 83.51% and 76.5% and responsivities of 0.37 and 0.34 A W^-1 , respectively. In the self-powered mode, the dark currents reach 7.95 × 10^-11 and 1.47 × 10^-8 A cm^-2 , providing high detectivities of 7.34 × 10¹³ and 4.96 × 10¹² Jones, for inverted and regular structures, respectively, and a long-term stability of at least 1600 h. This optimization strategy is compatible with existing materials and device structures and hence leads to substantial potential applications in perovskite-based optoelectronic devices.

SUBMITTER: Wu D

PROVIDER: S-EPMC8456202 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Interfacial Built-In Electric Field-Driven Direct Current Generator Based on Dynamic Silicon Homojunction.

Project description:Searching for light and miniaturized functional device structures for sustainable energy gathering from the environment is the focus of energy society with the development of the internet of things. The proposal of a dynamic heterojunction-based direct current generator builds up new platforms for developing in situ energy. However, the requirement of different semiconductors in dynamic heterojunction is too complex to wide applications, generating energy loss for crystal structure mismatch. Herein, dynamic homojunction generators are explored, with the same semiconductor and majority carrier type. Systematic experiments reveal that the majority of carrier directional separation originates from the breaking symmetry between carrier distribution, leading to the rebounding effect of carriers by the interfacial electric field. Strikingly, NN Si homojunction with different Fermi levels can also output the electricity with higher current density than PP/PN homojunction, attributing to higher carrier mobility. The current density is as high as 214.0 A/m2, and internal impedance is as low as 3.6 kΩ, matching well with the impedance of electron components. Furthermore, the N-i-N structure is explored, whose output voltage can be further improved to 1.3 V in the case of the N-Si/Al2O3/N-Si structure, attributing to the enhanced interfacial barrier. This approach provides a simple and feasible way of converting low-frequency disordered mechanical motion into electricity.

| S-EPMC7315393 | biostudies-literature

Improving Interfacial Stability for All-Solid-State Secondary Batteries with Precursor-Based Gradient Doping

Project description: Not available

| S-EPMC10882683 | biostudies-literature

Direct detection of circular polarized light in helical 1D perovskite-based photodiode.

Project description:Detection of circularly polarized light (CPL) has a high potential for development of various optical technologies. Conventional photodetectors require optical polarizers on the device to detect polarized light, and this causes substantial losses of sensitivity and resolution in light detection. Here, we report direct CPL detection by a photodiode using a helical one-dimensional (1D) structure of lead halide perovskites composed of naphthylethylamine-based chiral organic cations. The 1D structure with face-sharing (PbI6)4- octahedral chains whose helicity is largely affected by chiral cations shows intense circular dichroism (CD) signals over 3000 mdeg at 395 nm with the highly anisotropy factor (gCD) of 0.04. This high CD enables photocurrent detection with effective discrimination between left-handed and right-handed CPLs. The CPL detector based on this 1D perovskite achieved the highest polarization discrimination ratio of 25.4, which largely surpasses the direct detecting CPL devices (<4) using chiral plasmonic metamaterials and organic materials.

| S-EPMC7673728 | biostudies-literature

Improving Two-Step Prepared CH3NH3PbI3 Perovskite Solar Cells by Co-Doping Potassium Halide and Water in PbI2 Layer.

Project description:Incorporating additives into organic halide perovskite solar cells is the typical approach to improve power conversion efficiency. In this paper, a methyl-ammonium lead iodide (CH3NH3PbI3, MAPbI3) organic perovskite film was fabricated using a two-step sequential process on top of the poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) hole-transporting layer. Experimentally, water and potassium halides (KCl, KBr, and KI) were incorporated into the PbI2 precursor solution. With only 2 vol% water, the cell efficiency was effectively improved. Without water, the addition of all of the three potassium halides unanimously degraded the performance of the solar cells, although the crystallinity was improved. Co-doping with KI and water showed a pronounced improvement in crystallinity and the elimination of carrier traps, yielding a power conversion efficiency (PCE) of 13.9%, which was approximately 60% higher than the pristine reference cell. The effect of metal halide and water co-doping in the PbI2 layer on the performance of organic perovskite solar cells was studied. Raman and Fourier transform infrared spectroscopies indicated that a PbI2-dimethylformamide-water related adduct was formed upon co-doping. Photoluminescence enhancement was observed due to the co-doping of KI and water, indicating the defect density was reduced. Finally, the co-doping process was recommended for developing high-performance organic halide perovskite solar cells.

| S-EPMC6566305 | biostudies-literature

Indium Doping of Lead-Free Perovskite Cs2SnI6.

Project description:Structure and properties of an inorganic perovskite Cs2SnI6 demonstrated its potential as a light-harvester or electron-hole transport material; however, its optoelectronic properties are poorer than those of lead-based perovskites. Here, we report the way of light tuning of absorption and transport properties of cesium iodostannate(IV) Cs2SnI6 via partial heterovalent substitution of tin for indium. Light absorption and optical bandgaps of materials have been investigated by UV-vis absorption and photoluminescent spectroscopies. Low-temperature electron paramagnetic resonance spectroscopy was used to study the kind of paramagnetic centers in materials.

| S-EPMC7417766 | biostudies-literature

Kinetic Ionic Permeation and Interfacial Doping of Supported Graphene.

Project description:Due to its outstanding electrical properties and chemical stability, graphene finds widespread use in various electrochemical applications. Although the presence of electrolytes strongly affects its electrical conductivity, the underlying mechanism has remained elusive. Here, we employ terahertz spectroscopy as a contact-free means to investigate the impact of ubiquitous cations (Li+, Na+, K+, and Ca2+) in aqueous solution on the electronic properties of SiO2-supported graphene. We find that, without applying any external potential, cations can shift the Fermi energy of initially hole-doped graphene by ?200 meV up to the Dirac point, thus counteracting the initial substrate-induced hole doping. Remarkably, the cation concentration and cation hydration complex size determine the kinetics and magnitude of this shift in the Fermi level. Combined with theoretical calculations, we show that the ion-induced Fermi level shift of graphene involves cationic permeation through graphene. The interfacial cations located between graphene and SiO2 electrostatically counteract the substrate-induced hole doping effect in graphene. These insights are crucial for graphene device processing and further developing graphene as an ion-sensing material.

| S-EPMC6909232 | biostudies-literature

High-Performance Photodiode-Type Photodetectors Based on Polycrystalline Formamidinium Lead Iodide Perovskite Thin Films.

Project description:Photodetectors based on three dimensional organic-inorganic lead halide perovskites have recently received significant attention. As a new type of light-harvesting materials, formamidinium lead iodide (FAPbI3) is known to possess excellent optoelectronic properties even exceeding those of methylammonium lead iodide (MAPbI3). To date, only a few photoconductor-type photodetectors based on FAPbI3 single crystals and polycrystalline thin films in a lateral structure have been reported. Here, we demonstrate low-voltage, high-overall-performance photodiode-type photodetectors in a sandwiched geometry based on polycrystalline α-FAPbI3 thin films synthesized by a one-step solution processing method and post-annealing treatment. The photodetectors exhibit a broadband response from the near-ultraviolet to the near-infrared (330-800 nm), achieving a high on/off current ratio of 8.6 × 104 and fast response times of 7.2/19.5 μs. The devices yield a photoresponsivity of 0.95 AW-1 and a high specific detectivity of 2.8 × 1012 Jones with an external quantum efficiency (EQE) approaching 182% at -1.0 V under 650 nm illumination. The photodiode-type photodetectors based on polycrystalline α-FAPbI3 thin films with superior performance consequently show great promise for future optoelectronic device applications.

| S-EPMC6057967 | biostudies-literature

Electron doping of a double-perovskite flat-band system.

Project description:Electronic structure calculations indicate that the Sr2FeSbO6 double perovskite has a flat-band set just above the Fermi level that includes contributions from ordinary subbands with weak kinetic electron hopping plus a flat subband that can be attributed to the lattice geometry and orbital interference. To place the Fermi energy in that flat band, electron-doped samples with formulas Sr2-xLaxFeSbO6 (0 ≤ x ≤ 0.3) were synthesized, and their magnetism and ambient temperature crystal structures were determined by high-resolution synchrotron X-ray powder diffraction. All materials appear to display an antiferromagnetic-like maximum in the magnetic susceptibility, but the dominant spin coupling evolves from antiferromagnetic to ferromagnetic on electron doping. Which of the three subbands or combinations is responsible for the behavior has not been determined.

| S-EPMC9974513 | biostudies-literature

Electric Field Induced Electrorotation of 2D Perovskite Microplates.

Project description:High precision-controlled movement of microscale devices is crucial to obtain advanced miniaturized motors. In this work, we report a high-speed rotating micromotor based on two-dimensional (2D) all-inorganic perovskite CsPbBr3 microplates controlled via alternating-current (AC) external electric field. Firstly, the device configuration with optimized electric field distribution has been determined via systematic physical simulation. Using this optimized biasing configuration, when an AC electric field is applied at the four-electrode system, the microplates suspended in the tetradecane solution rotate at a speed inversely proportional to AC frequency, with a maximum speed of 16.4 × 2π rad/s. Furthermore, the electrical conductivity of CsPbBr3 microplates has been determined in a contactless manner, which is approximately 10-9-10-8 S/m. Our work has extended the investigations on AC electric field-controlled micromotors from 1D to 2D scale, shedding new light on developing micromotors with new configuration.

| S-EPMC8537397 | biostudies-literature

Discovery of electric devil's staircase in perovskite antiferroelectric.

Project description:The devil's staircase, describing step-like function for two competing frequencies, is well known over a wide range of dynamic systems including Huyghens' clocks, Josephson junction, and chemical reaction. In condensed matter physics, the devil's staircase has been observed in spatially modulated structures, such as magnetic ordering. It draws widespread attentions because it plays a crucial role in the fascinating phenomena including phase-locking behaviors, commensurate-incommensurate phase transition, and spin-valve effect. Here, we report the observation of polymorphic phase transitions consisting of several steps in PbZrO3-based system-namely, electric devil's staircase-originated from competing ferroelectric and antiferroelectric interactions. We fully characterize a specific electric dipole configuration by decomposing this competitive interaction in terms of basic structure and modulation function. Of particular interest is that the occurrence of many degenerate electric dipole configurations in devil's staircase enables superior energy storage performance. These observations are of great significance for exploring more substantive magnetic-electric correspondence and engineering practical high-power antiferroelectric capacitors.

| S-EPMC8986110 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data