Dataset Information

Reducing stiffness of shock-absorbing pylon amplifies prosthesis energy loss and redistributes joint mechanical work during walking.

ABSTRACT:

Background

A shock-absorbing pylon (SAP) is a modular prosthetic component designed to attenuate impact forces, which unlike traditional pylons that are rigid, can compress to absorb, return, or dissipate energy. Previous studies found that walking with a SAP improved lower-limb prosthesis users' comfort and residual limb pain. While longitudinal stiffness of a SAP has been shown to affect gait kinematics, kinetics, and work done by the entire lower limb, the energetic contributions from the prosthesis and the intact joints have not been examined. The purpose of this study was to determine the effects of SAP stiffness and walking speed on the mechanical work contributions of the prosthesis (i.e., all components distal to socket), knee, and hip in individuals with a transtibial amputation.

Methods

Twelve participants with unilateral transtibial amputation walked overground at their customary (1.22 ± 0.18 ms^-1) and fast speeds (1.53 ± 0.29 ms^-1) under four different levels of SAP stiffness. Power and mechanical work profiles of the leg joints and components distal to the socket were quantified. The effects of SAP stiffness and walking speed on positive and negative work were analyzed using two-factor (stiffness and speed) repeated-measure ANOVAs (α = 0.05).

Results

Faster walking significantly increased mechanical work from the SAP-integrated prosthesis (p < 0.001). Reducing SAP stiffness increased the magnitude of prosthesis negative work (energy absorption) during early stance (p = 0.045) by as much as 0.027 Jkg^-1, without affecting the positive work (energy return) during late stance (p = 0.159), suggesting a damping effect. This energy loss was partially offset by an increase in residual hip positive work (as much as 0.012 Jkg^-1) during late stance (p = 0.045). Reducing SAP stiffness also reduced the magnitude of negative work on the contralateral sound limb during early stance by 11-17% (p = 0.001).

Conclusions

Reducing SAP stiffness and faster walking amplified the prostheses damping effect, which redistributed the mechanical work, both in magnitude and timing, within the residual joints and sound limb. With its capacity to absorb and dissipate energy, future studies are warranted to determine whether SAPs can provide additional user benefit for locomotor tasks that require greater attenuation of impact forces (e.g., load carriage) or energy dissipation (e.g., downhill walking).

SUBMITTER: Maun JA

PROVIDER: S-EPMC8456590 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Similar Datasets

Project description:During typical human walking, the metatarsophalangeal joints undergo extension/flexion, which we term toe joint articulation. This toe joint articulation impacts locomotor performance, as evidenced by prior studies on prostheses, footwear, sports and humanoid robots. However, a knowledge gap exists in our understanding of how individual toe properties (e.g. shape, joint stiffness) affect bipedal locomotion. To address this gap, we designed and built a pair of adjustable foot prostheses that enabled us to independently vary different toe properties, across a broad range of physiological and non-physiological values. We then characterized the effects of varying toe joint stiffness across a range of different ankle joint stiffness conditions, and the effects of varying toe shape on walking biomechanics. Ten able-bodied individuals walked on a treadmill with prostheses mounted bilaterally underneath simulator boots (which immobilized their biological ankles). We collected motion capture and ground reaction force data, then computed joint kinematics and kinetics, and center-of-mass (COM) power and work. To our surprise, we found that varying toe joint stiffness affected COM Push-off dynamics during walking as much as, or in some cases even more than, varying ankle joint stiffness. Increasing toe joint stiffness increased COM Push-off work by up to 48% (6 J), and prosthetic anklefoot Push-off work by up to 181% (12 J). In contrast, large changes in toe shape had little effect on gait. This study brings attention to the toes, an aspect of prosthetic and robotic foot design that is often overlooked or overshadowed by design of the ankle. Optimizing toe joint stiffness in assistive and robotic devices (e.g. prostheses, exoskeletons, robot feet) may provide a complementary means of enhancing Push-off or other aspects of locomotor performance, in conjunction with the more conventional approach of augmenting ankle dynamics. Future studies are needed to isolate the effects of additional toe properties (e.g. toe length).