Operando Shell-Isolated Nanoparticle-Enhanced Raman Spectroscopy of the NO Reduction Reaction over Rhodium-Based Catalysts.
Ontology highlight
ABSTRACT:
SUBMITTER: Ballotin FC
PROVIDER: S-EPMC8456812 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Synthesis methods to prepare lower transition metal catalysts and specifically Ni for Shell-Isolated Nanoparticle-Enhanced Raman Spectroscopy (SHINERS) are explored. Impregnation, colloidal deposition, and spark ablation have been investigated as suitable synthesis routes to prepare SHINERS-active Ni/Au@SiO2 catalyst/Shell-Isolated Nanoparticles (SHINs). Ni precursors are confirmed to be notoriously difficult to reduce and the temperatures required are generally harsh enough to destroy SHINs, rendering SHINERS experiments on Ni infeasible using this approach. For colloidally synthesized Ni nanoparticles deposited on Au@SiO2 SHINs, stabilizing ligands first need to be removed before application is possible in catalysis. The required procedure results in transformation of the metallic Ni core to a fully oxidized metal nanoparticle, again too challenging to reduce at temperatures still compatible with SHINs. Finally, by use of spark ablation we were able to prepare metallic Ni catalysts directly on Au@SiO2 SHINs deposited on a Si wafer. These Ni/Au@SiO2 catalyst/SHINs were subsequently successfully probed with several molecules (i. e. CO and acetylene) of interest for heterogeneous catalysis, and we show that they could be used to study the in situ hydrogenation of acetylene. We observe the interaction of acetylene with the Ni surface. This study further illustrates the true potential of SHINERS by opening the door to studying industrially relevant reactions under in situ or operando reaction conditions.
| S-EPMC7187311 | biostudies-literature
Project description:Nanoparticle sintering during catalytic reactions is a major cause for catalyst deactivation. Understanding its atomic-scale processes and finding strategies to reduce it is of paramount scientific and economic interest. Here, we report on the composition-dependent three-dimensional restructuring of epitaxial platinum-rhodium alloy nanoparticles on alumina during carbon monoxide oxidation at 550 K and near-atmospheric pressures employing in situ high-energy grazing incidence x-ray diffraction, online mass spectrometry and a combinatorial sample design. For platinum-rich particles our results disclose a dramatic reaction-induced height increase, accompanied by a corresponding reduction of the total particle surface coverage. We find this restructuring to be progressively reduced for particles with increasing rhodium composition. We explain our observations by a carbon monoxide oxidation promoted non-classical Ostwald ripening process during which smaller particles are destabilized by the heat of reaction. Its driving force lies in the initial particle shape which features for platinum-rich particles a kinetically stabilized, low aspect ratio.
| S-EPMC4786879 | biostudies-other
Project description:We introduce a flexible microscale all-fiber-optic Raman probe which can be embedded into devices to enable operando in situ spectroscopy. The facile-constructed probe is composed of a nested antiresonant nodeless hollow-core fiber combined with an integrated high refractive index barium titanate microlens. Pump laser 785 nm excitation and near-infrared collection are independently characterized, demonstrating an excitation spot of full-width-half-maximum 1.1 μm. Since this is much smaller than the effective collection area, it has the greatest influence on the collected Raman scattering. Our characterization scheme provides a suitable protocol for testing the efficacy of these fiber probes using various combinations of fiber types and microspheres. Raman measurements on a surface-enhanced Raman spectroscopy sample and a copper battery electrode demonstrate the viability of the fiber probe as an alternative to bulk optic Raman microscopes, giving comparable collection to a 10 objective, thus paving the way for operando Raman studies in applications such as lithium battery monitoring.
| S-EPMC11342360 | biostudies-literature
Project description:Nonnoble metal catalysts are low-cost alternatives to Pt for the oxygen reduction reactions (ORRs), which have been studied for various applications in electrocatalytic systems. Among them, transition metal complexes, characterized by a redox-active single-metal-atom with biomimetic ligands, such as pyrolyzed cobalt-nitrogen-carbon (Co-Nx/C), have attracted considerable attention. Therefore, we reported the ORR mechanism of pyrolyzed Vitamin B12 using operando X-ray absorption spectroscopy coupled with electrochemical impedance spectroscopy, which enables operando monitoring of the oxygen binding site on the metal center. Our results revealed the preferential adsorption of oxygen at the Co2+ center, with end-on coordination forming a Co2+-oxo species. Furthermore, the charge transfer mechanism between the catalyst and reactant enables further Co-O species formation. These experimental findings, corroborated with first-principle calculations, provide insight into metal active-site geometry and structural evolution during ORR, which could be used for developing material design strategies for high-performance electrocatalysts for fuel cell applications.
| S-EPMC7447817 | biostudies-literature
Project description:Surface molecular information acquired in situ from a catalytic process can greatly promote the rational design of highly efficient catalysts by revealing structure-activity relationships and reaction mechanisms. Raman spectroscopy can provide this rich structural information, but normal Raman is not sensitive enough to detect trace active species adsorbed on the surface of catalysts. Here we develop a general method for in situ monitoring of heterogeneous catalytic processes through shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS) satellite nanocomposites (Au-core silica-shell nanocatalyst-satellite structures), which are stable and have extremely high surface Raman sensitivity. By combining operando SHINERS with density functional theory calculations, we identify the working mechanisms for CO oxidation over PtFe and Pd nanocatalysts, which are typical low- and high-temperature catalysts, respectively. Active species, such as surface oxides, superoxide/peroxide species and Pd-C/Pt-C bonds are directly observed during the reactions. We demonstrate that in situ SHINERS can provide a deep understanding of the fundamental concepts of catalysis.
| S-EPMC5458081 | biostudies-literature
Project description:To reduce the emissions of internal combustion engines, ceria-based catalysts have been widely investigated as possible alternatives to the more expensive noble metals. In the present work, a set of four different ceria-based materials was prepared via hydrothermal synthesis, studying the effect of Cu and Mn as dopants both in binary and ternary oxides. In situ Raman analyses were carried out to monitor the behaviour of defect sites throughout thermal cycles and during the soot oxidation reaction. Despite ceria doped with 5% of Cu featured the highest specific surface area, reducibility and amount of intrinsic and extrinsic defects, a poor soot oxidation activity was observed through the standard activity tests. This result was confirmed by the calculation of soot conversion curves obtained through a newly proposed procedure, starting from the Raman spectra collected during the in situ tests. Moreover, Raman analyses highlighted that new defectiveness was produced on the Cu-doped catalyst at high temperature, especially after soot conversion, while a slight increase of the defect band and a total reversibility were observed in case of the ternary oxide and pure/Mn-doped ceria, respectively. The major increment was related to the extrinsic defects component; tests carried out in different atmospheres suggested the assignment of this feature to vacancy-free sites containing oxidized doping cations. Its increase at the end of the tests can be an evidence of peroxides and superoxides deactivation on catalysts presenting excessive oxygen vacancy concentrations. Instead, ceria doped with 5% of Mn exhibited the best soot oxidation activity, thanks to an intermediate density of oxygen vacancies and to its well-defined morphology.
| S-EPMC6405916 | biostudies-literature
Project description:The imidazole ring (Im) of histidine side chains plays a unique role in the function of proteins through covalent bonding with metal ions and hydrogen bonding interactions with adjusted biomolecules and water. At biological interfaces, these interactions are modified because of the presence of an electric field. Self-assembled monolayers (SAMs) with the functional Im group mimic the histidine side chain at electrified interfaces. In this study, we applied in-situ shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS) to probe the structure and hydrogen bonding of Im-functionalized SAM on smooth Au at the electrochemical interface. The self-assembly of molecules on the Au induced the proton shift from N1 atom (Tautomer-I), which is the dominant form of Im in the bulk sample, to N3 atom (Tautomer-II). The impact of electrode potential on the hydrogen bonding interaction strength of the Im ring was identified by SHINERS. Temperature-Raman measurements and density functional theory (DFT) analysis revealed the spectral marker for Im ring packing (mode near 1496-1480 cm-1) that allowed us to associate the confined and strongly hydrogen bonded interfacial Im groups with electrode polarization at -0.8 V. Reflection adsorption IR (RAIR) spectra of SAMs with and without Im revealed that the bulky ring prevented the formation of a strongly hydrogen bonded amide group network.
| S-EPMC9573715 | biostudies-literature
Project description:Isolation and detection of circulating tumor cells (CTCs) from human blood plays an important role in non- invasive screening of cancer evolution and in predictive therapeutic treatment. Here, we present the novel tool utilizing: (i) the microfluidic device with (ii) incorporated photovoltaic (PV) based SERS-active platform, and (iii) shell-isolated nanoparticles (SHINs) for simultaneous separation and label-free analysis of circulating tumour cells CTCs in the blood specimens with high specificity and sensitivity. The proposed microfluidic chip enables the efficient size - based inertial separation of circulating cancer cells from the whole blood samples. The SERS-active platform incorporated into the microfluidic device permits the label-free detection and identification of isolated cells through the insight into their molecular and biochemical structure. Additionally, the silver nanoparticles coated with an ultrathin shell of silica (Ag@SiO2) was used to improve the detection accuracy and sensitivity of analysed tumor cells via taking advantages of shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS). The empirical analysis of SHINERS spectra revealed that there are some differences among studied (HeLa), renal cell carcinoma (Caki-1), and blood cells. Unique SHINERS features and differences in bands intensities between healthy and cancer cells might be associated with the variations in the quantity and quality of molecules such as lipid, protein, and DNA or their structure during the metastasis cancer formation. To demonstrate the statistical efficiency of the developed method and improve the differentiation for circulating tumors cells detection the principal component analysis (PCA) has been performed for all SHINERS data. PCA method has been applied to recognize the most significant differences in SHINERS data among the three analyzed cells: Caki-1, HeLa, and blood cells. The proposed approach challenges the current multi-steps CTCs detection methods in the terms of simplicity, sensitivity, invasiveness, destructivity, time and cost of analysis, and also prevents the defragmentation/damage of tumor cells and thus leads to improving the accuracy of analysis. The results of this research work show the potential of developed SERS based tool for the separation of tumor cells from whole blood samples in a simple and minimally invasive manner, their detection and molecular characterization using one single technology.
| S-EPMC6592934 | biostudies-literature
Project description:Exploring highly surface-enhanced Raman scattering (SERS)-active semiconductors is urgently required for practical applications. Here, with the guidance of theoretical calculations, amorphous rhodium sulfide microbowls with high enhancement factor (1 × 105) and low limit of detection (10-7 M) for rhodamine 6G are successfully developed. This remarkable sensitivity is attributed to quasi-resonance Raman effect and multiple light scattering. The first-principles calculations show that the energy gap of 4-nitrobenzenethiol adsorbed on Rh3S6 is greatly decreased by shifting its lowest unoccupied molecular orbital (LUMO) energy level close to the LUMO of Rh3S6, enabling quasi-resonance Raman effect by visible light. The finite-difference time-domain simulations demonstrate the efficient photon trapping ability enabled by multiple light scattering. The optimum wavelength of ?633 nm for SERS is predicted in simulations and confirmed in experiments. Our results provide both a deep insight of the photo-driven charge transfer process and an important guidance for designing SERS-active semiconductors.
| S-EPMC6260454 | biostudies-literature
Project description:Demand on synthetic approaches to high performance electrocatalyst with enhanced durability is increasing for fuel cell applications. In this work, we present a facile synthesis of carbon shell-coated PtFe nanoparticles by using acetylacetonates in metal precursors as carbon sources without an additional polymer coating process for the carbon shell formation. The carbon shell structure is systematically controlled by changing the annealing conditions such as the temperature and gas atmosphere. PtFe catalysts annealed at 700 °C under H2-mixed N2 gas show much higher oxygen reduction reaction (ORR) activity and superior durability compared to a Pt catalyst due to the ultrathin and porous carbon shells. In addition, when increasing the annealing temperature, the carbon shells encapsulating the PtFe nanoparticles improves the durability of the catalysts due to the enhanced crystallinity of the carbon shells. Therefore, it is demonstrated that the developed hybrid catalyst structure with the carbon shells not only allows the access of reactant molecules to the active sites for oxygen reduction reaction but also prevents the agglomeration of metal nanoparticles on carbon supports, even under harsh operating conditions. The proposed synthetic approach and catalyst structure are expected to provide more insights into the development of highly active and durable catalysts for practical fuel cell applications.
| S-EPMC6835385 | biostudies-literature