Browse
Submit Data
Databases
API
Help

Dataset Information

28 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Electrodeposition of Zinc onto Au(111) and Au(100) from the Ionic Liquid [MPPip][TFSI].

ABSTRACT: The improvement of rechargeable zinc/air batteries was a hot topic in recent years. Predominantly, the influence of water and additives on the structure of the Zn deposit and the possible dendrite formation were studied. However, the effect of the surface structure of the underlying substrate was not focused on in detail, yet. We now show the differences in electrochemical deposition of Zn onto Au(111) and Au(100) from the ionic liquid N-methyl-N-propylpiperidinium bis(trifluoromethanesulfonyl)imide. The fundamental processes were initially characterized via cyclic voltammetry and in situ scanning tunnelling microscopy. Bulk deposits were then examined using Auger electron spectroscopy and scanning electron microscopy. Different structures of Zn deposits are observed during the initial stages of electrocrystallisation on both electrodes, which reveals the strong influence of the crystallographic orientation on the metal deposition of zinc on gold.

SUBMITTER: Schuett FM

PROVIDER: S-EPMC8456931 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Fast electrodeposition of zinc onto single zinc nanoparticles.

Project description:The zinc deposition reaction onto metallic zinc has been investigated at the single particle level through the electrode-particle collision method in neutral solutions, and in respect of its dependence on the applied potential and the ionic strength of a sulphate-containing solution. Depending on the concentration of sulphate ions in solution, different amounts of metallic zinc were deposited on the single Zn nanoparticles. Specifically, insights into the electron transfer kinetics at the single particles were obtained, indicating an electrically early reactant-like transition state, which is consistent with the rate-determining partial de-hydration/de-complexation process. Such information on the reaction kinetics at the nanoscale is of vital importance for the development of more efficient and long-lasting nanostructured Zn-based negative electrodes for Zn-ion battery applications.

| S-EPMC7561586 | biostudies-literature

Adsorption, Wetting, Growth, and Thermal Stability of the Protic Ionic Liquid Diethylmethylammonium Trifluoromethanesulfonate on Ag(111) and Au(111).

Project description:We have studied the adsorption, wetting, growth, and thermal evolution of the protic IL diethylmethylammonium trifluoromethanesulfonate ([dema][TfO]) on Au(111) and Ag(111). Ultrathin films were deposited at room temperature (RT) and at 90 K, and were characterized in situ by angle-resolved X-ray photoelectron spectroscopy. For both surfaces, we observe that independent of temperature, initially, a closed 2D wetting layer forms. While the film thickness does not increase past this wetting layer at RT, at 200 K and below, "moderate" 3D island growth occurs on top of the wetting layer. Upon heating, on Au(111), the [dema][TfO] multilayers desorb at 292 K, leaving an intact [dema][TfO] wetting layer, which desorbs intact at 348 K. The behavior on Ag(111) is much more complex. Upon heating [dema][TfO] deposited at 90 K, the [dema]+ cations deprotonate in two steps at 185 and 305 K, yielding H[TfO] and volatile [dema]0. At 355 K, the formed H[TfO] wetting layer partly desorbs (∼50%) and partly decomposes to form an F-containing surface species, which is stable up to 570 K.

| S-EPMC8495895 | biostudies-literature

Antimony deposition onto Au(111) and insertion of Mg.

Project description:Magnesium-based secondary batteries have been regarded as a viable alternative to the immensely popular Li-ion systems owing to their high volumetric capacity. One of the largest challenges is the selection of Mg anode material since the insertion/extraction processes are kinetically slow because of the large ionic radius and high charge density of Mg2+ compared with Li+. In this work, we prepared very thin films of Sb by electrodeposition on a Au(111) substrate. Monolayer and multilayer deposition (up to 20 monolayers) were characterized by cyclic voltammetry (CV) and scanning tunneling microscopy (STM). Monolayer deposition results in a characteristic row structure; the monolayer is commensurate in one dimension, but not in the other. The row structure is to some extent maintained after deposition of further layers. After dissolution of the Sb multilayers the substrate is roughened on the atomic scale due to alloy formation, as demonstrated by CV and STM. Further multilayer deposition correspondingly leads to a rough deposit with protrusions of up to 3 nm. The cyclic voltammogram for Mg insertion/de-insertion from MgCl2/AlCl3/tetraglyme (MACC/TG) electrolyte into/from a Sb-modified electrode shows a positive shift (400 mV) of the onset potential of Mg deposition compared to that of a bare Au electrode. From the charge of the Mg deposition, we find that the ratio of Mg to Sb is 1:1, which is somewhat less than expected for the Mg3Sb2 alloy.

| S-EPMC6941451 | biostudies-literature

Electrodeposition of indium from the ionic liquid trihexyl(tetradecyl)phosphonium chloride.

Project description:The electrochemical behavior of indium in the ionic liquid trihexyl(tetradecyl)phosphonium chloride (Cyphos IL 101) was studied. Cyphos IL 101 first had to be purified, as the impurities present in commercial Cyphos IL 101 interfered with the electrochemical measurements. Electrochemical deposition of indium metal from this electrolyte occurs without hydrogen evolution, increasing the cathodic current efficiency compared to deposition from water and avoiding porosity within the deposited metal. Indium(iii) is the most stable oxidation state in the ionic liquid. This ion is reduced in two steps, first from indium(iii) to indium(i) and subsequently to indium(0). The high thermal stability of Cyphos IL 101 allowed the electrodeposition of indium at 120 °C and 180 °C. At 180 °C indium was deposited as liquid indium which allows for the easy separation of the indium and the possibility to design a continuous electrowinning process. On molybdenum, indium deposits as liquid droplets even below the melting point of indium. This was explained by the combination of melting point depression and undercooling. The possibility to separate indium from iron and zinc by electrodeposition was tested. It is possible to separate indium from zinc by electrodeposition, but iron deposits together with indium.

| S-EPMC6592163 | biostudies-literature

Electronic and vibrational surface-enhanced Raman scattering: from atomically defined Au(111) and (100) to roughened Au.

Project description:In surface-enhanced Raman spectra, vibrational peaks are superimposed on a background continuum, which is known as one major experimental anomaly. This is problematic in assessing vibrational information especially in the low Raman-shift region below 200 cm-1, where the background signals dominate. Herein, we present a rigorous comparison of normal Raman and surface-enhanced Raman spectra for atomically defined surfaces of Au(111) or Au(100) with and without molecular adsorbates. It is clearly shown that the origin of the background continuum is well explained by a local field enhancement of electronic Raman scattering in the conduction band of Au. In the low Raman-shift region, electronic Raman scattering gains additional intensity, probably due to a relaxation in the conservation of momentum rule through momentum transfer from surface roughness. Based on the mechanism for generation of the spectral background, we also present a practical method to extract electronic and vibrational information at the metal/dielectric interface from the measured raw spectra by reducing the thermal factor, the scattering efficiency factor and the Purcell factor over wide ranges in both the Stokes and the anti-Stokes branches. This method enables us not only to analyse concealed vibrational features in the low Raman-shift region but also to estimate more reliable local temperatures from surface-enhanced Raman spectra.

| S-EPMC8162194 | biostudies-literature

On-Surface Metathesis of an Ionic Liquid on Ag(111).

Project description:We investigated the adsorption, surface enrichment, ion exchange, and on-surface metathesis of ultrathin mixed IL films on Ag(111). We stepwise deposited 0.5 ML of the protic IL diethylmethylammonium trifluoromethanesulfonate ([dema][TfO]) and 1.0 ML of the aprotic IL 1-methyl-3-octylimidazolium hexafluorophosphate ([C8 C1 Im][PF6 ]) at around 90 K. Thereafter, the resulting layered frozen film was heated to 550 K, and the thermally induced phenomena were monitored in situ by angle-resolved X-ray photoelectron spectroscopy. Between 135 and 200 K, [TfO]- anions at the Ag(111) surface are exchanged by [PF6 ]- anions and enriched together with [C8 C1 Im]+ cations at the IL/vacuum interface. Upon further heating, [dema][PF6 ] and [OMIm][PF6 ] desorb selectively at ∼235 and ∼380 K, respectively. Hereby, a wetting layer of pure [C8 C1 Im][TfO] is formed by on-surface metathesis at the IL/metal interface, which completely desorbs at ∼480 K. For comparison, ion enrichment at the vacuum/IL interface was also studied in macroscopic IL mixtures, where no influence of the solid support is expected.

| S-EPMC9321566 | biostudies-literature

Aluminium Electrodeposition from Ionic Liquid: Effect of Deposition Temperature and Sonication †.

Project description:Since their discovery, ionic liquids (ILs) have attracted a wide interest for their potential use as a medium for many chemical processes, in particular electrochemistry. As electrochemical media they allow the electrodeposition of elements that are impossible to reduce in aqueous media. We have investigated the electrodeposition of aluminium from 1-butyl-3-methyl-imidazolium chloride ((Bmim)Cl)/AlCl₃ (40/60 mol %) as concerns the effect of deposition parameters on the quality of the deposits. Thick (20 μm) aluminium coatings were electrodeposited on brass substrates at different temperatures and mixing conditions (mechanical stirring and sonication). These coatings were investigated by means of scanning electron microscope, roughness measurements, and X-ray diffraction to assess the morphology and the phase composition. Finally, electrochemical corrosion tests were carried out with the intent to correlate the deposition parameters to the anti-corrosion properties.

| S-EPMC5457088 | biostudies-other

Reversible electrodeposition and stripping of magnesium from solvate ionic liquid-tetrabutylammonium chloride mixtures.

Project description:The physicochemical properties of three new magnesium-containing solvate ionic liquids are reported. The solvation structures were analysed by Raman spectroscopy, revealing a solvent separated ion pair structure at room temperature. The reversible electrodeposition and stripping of magnesium from mixtures of these solvate ionic liquids and tetra-n-butylammonium chloride is described. The electrolytes are significantly less volatile than similar dilute electrolytes, even at elevated temperatures and the deposition current densities exceed 1 A dm-2 at 80 °C. The influence of the chloride concentration on magnesium deposition was studied with cyclic voltammetry and chronopotentiometry. It was found that the stripping of magnesium is governed by two competing reactions, and the addition of tetrabutylammonium chloride to the solvate ionic liquids was necessary to prevent passivation and efficiently strip the deposited magnesium.

| S-EPMC9057911 | biostudies-literature

Anion Exchange at the Liquid/Solid Interface of Ultrathin Ionic Liquid Films on Ag(111).

Project description:Thin ionic liquid (IL) films play an important role in many applications. To obtain a better understanding of the ion distribution within IL mixture films, we sequentially deposited ultrathin layers of two ILs with the same cation but different anions onto Ag(111), and monitored their dynamic behaviour by angle-resolved X-ray photoelectron spectroscopy. Upon depositing [C8 C1 Im][PF6 ] on top of a wetting layer of [C8 C1 Im][Tf2 N] at room temperature (RT), we found a pronounced enrichment of the [Tf2 N]- anions at the IL/vacuum interface, due to a rapid anion exchange at the IL/solid interface. In contrast, at 90?K, the [Tf2 N]- anions remain at the IL/solid interface. Upon heating, we observe a rearrangement of the cations between 140 and 160?K, such that the octyl chains preferentially point towards the vacuum. Above 170?K, the ions start to become mobile, and at 220?K, the anion exchange is completed, with the [Tf2 N]- anions enriched at the IL/vacuum interface in the same way as found for deposition at RT. The temperature range for the anion exchange corresponds well to glass transition temperatures reported in literature. We propose two driving forces to be cooperatively responsible for the replacement/exchange of [Tf2 N]- at the IL/solid interface and its enrichment at the IL/vacuum interface. First, the adsorption energy of [C8 C1 Im][PF6 ] is significantly larger than that of [C8 C1 Im][Tf2 N], and second, the surface tension of [C8 C1 Im][Tf2 N] is lower than that of [C8 C1 Im][PF6 ].

| S-EPMC6282575 | biostudies-literature

Deposition of metal particles onto semiconductor nanorods using an ionic liquid.

Project description:The current study investigates whether metal deposition onto an existing nanorod can be carried out using an ionic liquid, and the effect this has on catalytic performance. Platinum, gold, and silver nanoparticles were deposited onto CdSe@CdS (core@shell) nanorods from metal salts in an ionic liquid (1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide) without additional surfactants or reducing agents. Photocatalytic dye degradation experiments showed that catalysts with platinum particles deposited using the ionic liquid out-performed similar materials synthesized using organic solvents and ligands. We concluded that metal particles can be deposited onto well-defined semiconductor nanorods using ionic liquids and metal salts without the need for additional reagents, and the deposited particles did not cause significant aggregation even when these materials were taken into organic media. It is possible that a broad range of metal/semiconductor heterostructured particles can be prepared using the methods reported here.

| S-EPMC6423590 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data