Browse
Submit Data
Databases
API
Help

Dataset Information

12 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Comparison of Cellulose Dissolution Behavior by Alkaline and Sulfuric Acid Solvents and Their Films' Physical Properties.

ABSTRACT: Three alkaline mixtures (NaOH/thiourea, NaOH/urea/thiourea, NaOH/urea/ZnO) and sulfuric acid were used at low temperatures as cellulose solvents, and their cellulose solubility and films' physical properties for bleached chemical wood pulps and cotton linter were compared. Their degree of polymerization (DP) was controlled to 600-800 before dissolution. Among the alkaline solvents, NaOH/urea/ZnO gave the film the highest tensile strength and stretch. When compared to sulfuric acid, NaOH/urea/ZnO gave lower strength properties but higher crystallinity indices in the films. While alkaline solvents could not dissolve the high DP cellulose (DP ~ 2000), sulfuric acid could dissolve the high DP cellulose at below zero Celsius temperature, and the strength properties of the films were not much different from that of the low DP one. It appeared that the low-temperature sulfuric acid treatment did away with the cellulose's DP controlling stage; it decreased cellulose DP very quickly for the high-DP cellulose at the initial stage, and as soon as the cellulose DP reached a DP low enough for dissolution, it began to dissolve the cellulose to result in stable cellulose solution.

SUBMITTER: Han J

PROVIDER: S-EPMC8465038 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Mechanical and physical properties of recombinant spider silk films using organic and aqueous solvents.

Project description:Spider silk has exceptional mechanical and biocompatibility properties. The goal of this study was optimization of the mechanical properties of synthetic spider silk thin films made from synthetic forms of MaSp1 and MaSp2, which compose the dragline silk of Nephila clavipes. We increased the mechanical stress of MaSp1 and 2 films solubilized in both HFIP and water by adding glutaraldehyde and then stretching them in an alcohol based stretch bath. This resulted in stresses as high as 206 MPa and elongations up to 35%, which is 4× higher than the as-poured controls. Films were analyzed using NMR, XRD, and Raman, which showed that the secondary structure after solubilization and film formation in as-poured films is mainly a helical conformation. After the post-pour stretch in a methanol/water bath, the MaSp proteins in both the HFIP and water-based films formed aligned ?-sheets similar to those in spider silk fibers.

| S-EPMC4130237 | biostudies-literature

Development of Diallylimidazolium Methoxyacetate/DMSO (DMF/DMA) Solvents for Improving Cellulose Dissolution and Fabricating Porous Material.

Project description:Cellulose is the most abundant natural biopolymer, with unique properties such as biodegradability, biocompability, nontoxicity, and so on. However, its extensive application has actually been hindered, because of its insolubility in water and most solvents. Herein, highly efficient cellulose solvents were developed by coupling diallylimidazolium methoxyacetate ([A2im][CH3OCH2COO]) with polar aprotic solvents dimethyl sulfoxide (DMSO), N,N-dimethylformamide (DMF), and N,N-dimethylacetamide (DMA). Attractively, these solvents showed extraordinarily powerful dissolution performance for cellulose (e.g., 26.1 g·100g-1) in [A2im][CH3OCH2COO]/DMSO(RDMSO = 1.01 solvent even at 25 °C), which is much more advantageous over previously reported solvents. To our knowledge, such powerful cellulose solvents have not been reported before. The cellulose dissolution mechanism is proposed to be of three combined factors: (1) The hydrogen bond interactions of the H2, H4 and H6 in [A2im]+ and the carboxyl O atom in [CH3OCH2COO]-, along with the hydroxyl H atom and O atom in cellulose, are main driving force for cellulose dissolution; (2) the dissociation of [A2im][CH3OCH2COO] by DMF increases the anion and cation concentrations and thus promotes cellulose dissolution; (3) at the same time, DMF also stabilizes the dissolved cellulose chains. Meanwhile, the porous cellulose material with a varying morphologic structure could be facially fabricated by modulating the cellulose solution concentration. Additionally, the dissolution of cellulose in the solvents is only a physical process, and the regenerated cellulose from the solvents retains sufficient thermostability and a chemical structure similar to the original cellulose. Thus, this work will provide great possibility for developing cellulose-based products at ambient temperatures or under no extra heating/freezing conditions.

| S-EPMC6572045 | biostudies-literature

Recent Advances in Solvents for the Dissolution, Shaping and Derivatization of Cellulose: Quaternary Ammonium Electrolytes and their Solutions in Water and Molecular Solvents.

Project description:There is a sustained interest in developing solvents for physically dissolving cellulose, i.e., without covalent bond formation. The use of ionic liquids, ILs, has generated much interest because of their structural versatility that results in efficiency as cellulose solvents. Despite some limitations, imidazole-based ILs have received most of the scientific community's attention. The objective of the present review is to show the advantages of using quaternary ammonium electrolytes, QAEs, including salts of super bases, as solvents for cellulose dissolution, shaping, and derivatization, and as a result, increase the interest in further investigation of these important solvents. QAEs share with ILs structural versatility; many are liquids at room temperature or are soluble in water and molecular solvents (MSs), in particular dimethyl sulfoxide. In this review we first give a historical background on the use of QAEs in cellulose chemistry, and then discuss the common, relatively simple strategies for their synthesis. We discuss the mechanism of cellulose dissolution by QAEs, neat or as solutions in MSs and water, with emphasis on the relevance to cellulose dissolution efficiency of the charge and structure of the cation and. We then discuss the use of cellulose solutions in these solvents for its derivatization under homogeneous and heterogeneous conditions. The products of interest are cellulose esters and ethers; our emphasis is on the role of solvent and possible side reactions. The final part is concerned with the use of cellulose dopes in these solvents for its shaping as fibers, a field with potential commercial application.

| S-EPMC6017797 | biostudies-other

Oxidative Dissolution of Metals in Organic Solvents.

Project description:Dissolution of metals in organic solvents is relevant to various application fields, such as metal extraction from ores or secondary resources, surface etching or polishing of metals, direct synthesis of organometallic compounds, and separation of metals from other compounds. Organic solvents for dissolution of metals can offer a solution when aqueous systems fail, such as separation of metals from metal oxides, because both the metal and metal oxide could codissolve in aqueous acidic solutions. This review critically discusses organic media (conventional molecular organic solvents, ionic liquids, deep-eutectic solvents and supercritical carbon dioxide) for oxidative dissolution of metals in different application areas. The reaction mechanisms of dissolution processes are discussed for various lixiviant systems which generally consist of oxidizing agents, chelating agents, and solvents. Different oxidizing agents for dissolution of metals are reviewed such as halogens, halogenated organics, donor-acceptor electron-transfer systems, polyhalide ionic liquids, and others. Both chemical and electrochemical processes are included. The review can guide researchers to develop more efficient, economic, and environmentally friendly processes for dissolution of metals in their elemental state.

| S-EPMC8154329 | biostudies-literature

From Structure to Properties of Composite Films Derived from Cellulose Nanocrystals.

Project description:Many natural materials exhibit a multilayer structure in which adjacent layers rotate in a helicoidal manner. The remarkable optical and mechanical properties of these materials have motivated research and development of man-made materials with similar morphology. Among them, composite materials by cellulose nanocrystals (CNCs) and polymers have attracted great interest; however, the relationship between the cholesteric structure and the material properties is not well understood. We used the composite CNC-polymer latex films with random, stratified, and cholesteric morphologies, all with the same compositions, to explore the effect of structure on the optical and mechanical properties of the composite films. Films with a cholesteric structure exhibited strong extinction, circular dichroism, and high stiffness; however, they had lower toughness than the films with the cholesteric stratified morphology. Films with disordered morphologies exhibited the highest toughness and the lowest stiffness. These trends were attributed to the confinement effects and the difference in polymer distribution in the films. These results provide guidance for the preparation of biomimetic cholesteric films with targeted optical and mechanical properties.

| S-EPMC6644686 | biostudies-literature

Preparation and Properties of Cassava Residue Cellulose Nanofibril/Cassava Starch Composite Films.

Project description:Because of its non-toxic, pollution-free, and low-cost advantages, environmentally-friendly packaging is receiving widespread attention. However, using simple technology to prepare environmentally-friendly packaging with excellent comprehensive performance is a difficult problem faced by the world. This paper reports a very simple and environmentally-friendly method. The hydroxyl groups of cellulose nanofibrils (CNFs) were modified by introducing malic acid and the silane coupling agent KH-550, and the modified CNF were added to cassava starch as a reinforcing agent to prepare film with excellent mechanical, hydrophobic, and barrier properties. In addition, due to the addition of malic acid and a silane coupling agent, the dispersibility and thermal stability of the modified CNFs became significantly better. By adjusting the order of adding the modifiers, the hydrophobicity of the CNFs and thermal stability were increased by 53.5% and 36.9% ± 2.7%, respectively. At the same time, the addition of modified CNFs increased the tensile strength, hydrophobicity, and water vapor transmission coefficient of the starch-based composite films by 1034%, 129.4%, and 35.95%, respectively. This material can be widely used in the packaging of food, cosmetics, pharmaceuticals, and medical consumables.

| S-EPMC7221531 | biostudies-literature

Effects of non-solvents and electrolytes on the formation and properties of cellulose I filaments.

Project description:Coagulation is a critical process in the assembly of cellulose nanofibrils into filaments by wet spinning; however, so far, the role of the coagulation solvent has not been systematically elucidated in this context. This work considers organic non-solvents (ethanol, acetone) and aqueous electrolyte solutions (NaCl(aq), HCl(aq), CaCl2(aq)) for the coagulation of negatively charged cellulose nanofibrils via wet spinning. The associated mechanisms of coagulation with such non-solvents resulted in different spinnability, coagulation and drying time. The properties of the achieved filaments varied depending strongly on the coagulant used: filaments obtained from electrolytes (using Ca2+ and H+ as counterions) demonstrated better water/moisture stability and thermomechanical properties. In contrast, the filaments formed from organic non-solvents (with Na+ as counterions) showed high moisture sorption and low hornification when subjected to cycles of high and low humidity (dynamic vapor sorption experiments) and swelled extensively upon immersion in water. Our observations highlight the critical role of counter-ions and non-solvents in filament formation and performance. Some of the fundamental aspects are further revealed by using quartz crystal microgravimetry with model films of nanocelluloses subjected to the respective solvent exchange.

| S-EPMC6854096 | biostudies-literature

Comparison of Deep Eutectic Solvents on Pretreatment of Raw Ramie Fibers for Cellulose Nanofibril Production.

Project description:Deep eutectic solvents (DESs), featured as promising green solvents, were applied to examine their effectiveness in pretreating raw ramie fibers (RFs) for cellulose nanofibril (CNF) production. The pretreatment performance of three DESs, i.e., choline chloride-urea (CU), choline chloride-oxalic acid dihydrate (CO), and choline chloride-glycerol (CG), was evaluated based on chemical composition analysis and structural and morphological changes. CO attained the most dramatic morphological changes of RFs, followed by CG and CU. Its high structural disruption of RFs during the pretreatment process, shown in the results from scanning electron microscopy and atomic force microscopy, could be due to an outstanding ability to remove amorphous cellulose and noncellulosic components from raw RFs, confirmed by the results of chemical composition analysis, Fourier transform infrared spectroscopy, and X-ray diffractometry. Overall, this study provided an innovative and effective pretreatment process for fractionating raw cellulosic fibers, so as to promote the subsequent preparation of CNFs.

| S-EPMC7081644 | biostudies-literature

Evaluating Alternatives to Water as Solvents for Life: The Example of Sulfuric Acid.

Project description:The chemistry of life requires a solvent, which for life on Earth is water. Several alternative solvents have been suggested, but there is little quantitative analysis of their suitability as solvents for life. To support a novel (non-terrestrial) biochemistry, a solvent must be able to form a stable solution of a diverse set of small molecules and polymers, but must not dissolve all molecules. Here, we analyze the potential of concentrated sulfuric acid (CSA) as a solvent for biochemistry. As CSA is a highly effective solvent but a reactive substance, we focused our analysis on the stability of chemicals in sulfuric acid, using a model built from a database of kinetics of reaction of molecules with CSA. We consider the sulfuric acid clouds of Venus as a test case for this approach. The large majority of terrestrial biochemicals have half-lives of less than a second at any altitude in Venus's clouds, but three sets of human-synthesized chemicals are more stable, with average half-lives of days to weeks at the conditions around 60 km altitude on Venus. We show that sufficient chemical structural and functional diversity may be available among those stable chemicals for life that uses concentrated sulfuric acid as a solvent to be plausible. However, analysis of meteoritic chemicals and possible abiotic synthetic paths suggests that postulated paths to the origin of life on Earth are unlikely to operate in CSA. We conclude that, contrary to expectation, sulfuric acid is an interesting candidate solvent for life, but further work is needed to identify a plausible route for life to originate in it.

| S-EPMC8145300 | biostudies-literature

Cellulose dissolution in diallylimidazolium methoxyacetate + N-methylpyrrolidinone mixture.

Project description:The utilization of cellulose in industrial applicat is of great significance to sustainable development of human society and reducing dependence on dwindling fossil resources. Nevertheless, this utilization of cellulose has actually been limited due to its insolubilization. Here, novel solvents consisting of diallylimidazolium methoxy acetate ([A2im][CH3OCH2COO]) and N-methylpyrrolidinone (NMP) were developed. The solubility of cellulose in [A2im][CH3OCH2COO]/NMP was determined, and the influence of [A2im][CH3OCH2COO]/NMP molar ratio on cellulose dissolution was systematically investigated. Meanwhile, we also presented the affecting factors of the cellulose material fabrication including preparation approach, [A2im][CH3OCH2COO] and cellulose solution concentration. Attractively, the [A2im][CH3OCH2COO]/NMP solvents display much powerful dissolution capacity for cellulose even at 25 °C (25.4 g 100 g-1). This is mainly ascribed to the combined factors: The hydrogen bond interactions of the H2, H4 and H6 in [A2im]+ and carboxyl O atom in [CH3OCH2COO]- with the hydroxyl H atom and O atom in cellulose; the dissociation of NMP towards [A2im][CH3OCH2COO]; the stabilization of NMP towards the dissolved cellulose chains. In addition, the thermostability and chemical structure of the regenerated cellulose from the solvents was also estimated.

| S-EPMC6687689 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data