Browse
Submit Data
Databases
API
Help

Dataset Information

22 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Design of Alginate-Based Bionanocomposites with Electrical Conductivity for Active Food Packaging.

ABSTRACT: Bionanocomposite materials have been designed as a promising route to enhance biopolymer properties, especially for food packaging application. The present study reports the preparation of bionanocomposite films of alginate with different loadings of pure reduced graphene oxide (rGO) or of mixed zinc oxide-rGO (ZnO-rGO) fillers by solvent casting. Sepiolite is used to make compatible rGO with the hydrophilic matrix. The addition of fillers to alginate matrix maintains the low water solubility promoted by the calcium chloride treatment, and, additionally, they demonstrate a weaker mechanical properties, and a slight increase in water vapor permeability and wettability. Due to the properties of ZnO-rGO, the alginate bionanocomposites show an increase of electrical conductivity with the increase of filler content. While the highest electrical conductivity (0.1 S/m) is achieved by the in-plane measurement, it is in the through-plane measurement the remarkable enhancement of almost 30 times greater than the alginate film. With 50% of ZnO-rGO filler, the bionanocomposites present the highest antioxidant and antibacterial activities. The combination of electrical conductivity with bioactive properties makes these films promising not only to extend food shelf-life but also to allow packaged food sterilization at low temperature.

SUBMITTER: Alves Z

PROVIDER: S-EPMC8466826 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Degradable and Photocatalytic Antibacterial Au-TiO₂/Sodium Alginate Nanocomposite Films for Active Food Packaging.

Project description:A degradable and antibacterial sodium alginate film containing functional Au-TiO₂ nanocomposites for food packaging was successfully developed. The Au-TiO₂ nanocomposites are synthesized hydrothermally and mixed with the alginate solution to form the film by a casting method. The Au-TiO₂ nanocomposites enable the film with excellent visible light absorption and transfer ability with the light absorption rang covering UV⁻visible wavelength (300⁻800 nm) and induce the increase of the film water contact angle from 40° to 74°, which contributes to the film shape stability. Furthermore, compared to the TiO₂ nanoparticle-incorporated film, the antibacterial ability of Au-TiO₂/sodium alginate composite film is improved approximately by 60% and 50% against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli), respectively, in light conditions. The antibacterial property of the film arises from the increased production of reactive oxygen species (ROS) induced by the surface plasmonic resonance of Au nanoparticles. The degradable and antibacterial properties render the composite film of great application potential in food packaging industry.

| S-EPMC6266112 | biostudies-literature

Optimizing the Dielectric and Mechanical Performance of 3D-Printed Cellulose-Based Biocomposites and Bionanocomposites through Factorial Design for Electrical Insulation Application.

Project description:Materials for low-permittivity and electrical insulation applications need to be re-engineered to achieve sustainable development. To address this challenge, the proposed study focused on the dielectric and mechanical optimization of 3D-printed cellulose-based composites for electrical insulation applications. Two different fillers, microcrystalline cellulose (MCC) and nanocrystalline cellulose (NCC), were used to create biocomposites and bionanocomposites, respectively, blended into a polylactic acid (PLA) matrix. The effects of infill ratio, printing temperature, and filler content on dielectric and mechanical properties were measured using an incomplete L9 (3^3) factorial design. The findings showed that the infill ratio was the most significant factor influencing the properties tested, directly attributable to the increase in material availability for polarization and mechanical performance. The second most influential factor was the filler content, increasing the polarity of the tested composites and decreasing the toughness of the biocomposites and bionanocomposites. Finally, printing temperature had no significant effect. Results for the biocomposites at a 50% infill ratio, 200 °C printing temperature, and a weight content of MCC of 15% gave a 60% higher tensile-mode stiffness than neat PLA printed under the same conditions, while exhibiting lower dielectric properties than neat PLA printed with a 100% infill ratio. These results pave the way for new lightweight materials for electrical insulation.

| S-EPMC11314442 | biostudies-literature

Citrus Peel Extracts for Industrial-Scale Production of Bio-Based Active Food Packaging.

Project description:The thermal stability of four different commercial citrus peel extracts was tested and improved by an encapsulation process with β-cyclodextrins in a spray-dryer. All extracts after the encapsulation process maintained a good antioxidant capacity, with an apparent loss in total phenolic compounds of around 20-25%. In addition, all samples showed good antimicrobial activity (MIC 5-0.625 mg/mL) against Staphylococcus aureus, which was maintained after the encapsulation process (MIC 5-1.25 mg/mL). Based on the antioxidant and antimicrobial activity results, the best-encapsulated citrus extract was selected for incorporation into a polylactic acid/polyhydroxy butyrate (PLA/PHB) film. The latter was then produced on an industrial scale by cast extrusion and was found to be suitable for food contact as it showed overall migration values in different food simulants lower than the legislative limit of 10 mg of non-volatile substances per 1 dm2 of surface area. The UHPLC-HRMS analysis, performed to evaluate the migration of the active compounds, revealed about 13.41% release in food simulant A and 11.02% in food simulant B. Antimicrobial analysis conducted directly on the film showed a growth inhibition activity towards Escherichia coli and Staphylococcus aureus equal to 30 and 60%, respectively.

| S-EPMC8750968 | biostudies-literature

Functional Nanocellulose, Alginate and Chitosan Nanocomposites Designed as Active Film Packaging Materials.

Project description:The aim of the study was to characterize and compare films made of cellulose nanocrystals (CNC), nano-fibrils (CNF), and bacterial nanocellulose (BNC) in combination with chitosan and alginate in terms of applicability for potential food packaging applications. In total, 25 different formulations were made and evaluated, and seven biopolymer films with the best mechanical performance (tensile strength, strain)-alginate, alginate with 5% CNC, chitosan, chitosan with 3% CNC, BNC with and without glycerol, and CNF with glycerol-were selected and investigated regarding morphology (SEM), density, contact angle, surface energy, water absorption, and oxygen and water barrier properties. Studies revealed that polysaccharide-based films with added CNC are the most suitable for packaging purposes, and better dispersing of nanocellulose in chitosan than in alginate was observed. Results showed an increase in hydrophobicity (increase of contact angle and reduced moisture absorption) of chitosan and alginate films with the addition of CNC, and chitosan with 3% CNC had the highest contact angle, 108 ± 2, and 15% lower moisture absorption compared to pure chitosan. Overall, the ability of nanocellulose additives to preserve the structure and function of chitosan and alginate materials in a humid environment was convincingly demonstrated. Barrier properties were improved by combining the biopolymers, and water vapor transmission rate (WVTR) was reduced by 15-45% and oxygen permeability (OTR) up to 45% by adding nanocellulose compared to single biopolymer formulations. It was concluded that with a good oxygen barrier, a water barrier that is comparable to PLA, and good mechanical properties, biopolymer films would be a good alternative to conventional plastic packaging used for ready-to-eat foods with short storage time.

| S-EPMC8348297 | biostudies-literature

Biopolymers-Based Materials Containing Silver Nanoparticles as Active Packaging for Food Applications-A Review.

Project description:Packaging is an integral part of food products, allowing the preservation of their quality. It plays an important role, protecting the packed product from external conditions, maintaining food quality, and improving properties of the packaged food during storage. Nevertheless, commonly used packaging based on synthetic non-biodegradable polymers causes serious environmental pollution. Consequently, numerous recent studies have focused on the development of biodegradable packaging materials based on biopolymers. In addition, biopolymers may be classified as active packaging materials, since they have the ability to carry different active substances. This review presents the latest updates on the use of silver nanoparticles in packaging materials based on biopolymers. Silver nanoparticles have become an interesting component of biodegradable biopolymers, mainly due to their antimicrobial properties that allow the development of active food packaging materials to prolong the shelf life of food products. Furthermore, incorporation of silver nanoparticles into biopolymers may lead to the development of materials with improved physical-mechanical properties.

| S-EPMC7037217 | biostudies-literature

Physical-Chemical Evaluation of Active Food Packaging Material Based on Thermoplastic Starch Loaded with Grape cane Extract.

Project description:The aim of this paper is to evaluate the physicochemical and microbiological properties of active thermoplastic starch-based materials. The extract obtained from grape cane waste was used as a source of stilbene bioactive components to enhance the functional properties of thermoplastic starch (TPS). The biomaterials were prepared by the compression molding technique and subjected to mechanical, thermal, antioxidant, and microbiological tests. The results showed that the addition of grape cane extract up to 15 wt% (TPS/WE15) did not significantly influence the thermal stability of obtained biomaterials, whereas mechanical resistance decreased. On the other side, among all tested pathogens, thermoplastic starch based materials showed antifungal activity toward Botrytis cinerea and antimicrobial activity toward Staphylococcus aureus, suggesting potential application in food packaging as an active biomaterial layer.

| S-EPMC7144104 | biostudies-literature

Impact of Olive Extract Addition on Corn Starch-Based Active Edible Films Properties for Food Packaging Applications.

Project description:Active edible films based on corn starch containing glycerol as a plasticizer and an olive extract obtained from Spanish olive fruit (Olea europaea) by-products (olive extract; OE) at different concentrations (0, 0.05, 0.1 and 0.2 wt%) were prepared by using the casting technique and further solvent-evaporation. OE showed high total phenolic and flavonoids contents and antioxidant activity, which was evaluated by using three different methods: free radical scavenging assay by (1, 1-Dipheny l-2-picrylhydrazyl) DPPH, 2, 2-Azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) ABTS radical inhibition and ferric reducing antioxidant power (FRAP). The incorporation of OE into the corn starch/glycerol matrix underlined the antioxidant potential and antimicrobial effect against E. coli and S. aureus of these novel active films, being noticeable for films added with 0.2 wt% OE. The developed active films showed a clear thermo-oxidative stability improvement with OE incorporation, in particular at 0.2 wt% loading with an increase of around 50 °C in the initial degradation temperature (Tini) and oxidation onset temperature (OOT). The functional properties of control films were also improved with OE addition resulting in a decrease in Young's modulus, elongation at break, shore D hardness and water vapor permeability. The present work suggested the potential of the developed corn starch-based edible films as low-price and sustainable food packaging systems to prevent the oxidative deterioration of packaged foodstuff while reducing also the generation of olive by-products.

| S-EPMC7555094 | biostudies-literature

Antimicrobial Polymer-Based Materials for Food Packaging Applications.

Project description:Antimicrobial packaging has recently attracted a great deal of interest from the food industry due to the boost in consumer demand for minimally-processed, preservative-free products.[...].

| S-EPMC7240702 | biostudies-literature

Chitosan Nanofiber and Cellulose Nanofiber Blended Composite Applicable for Active Food Packaging.

Project description:This paper reports that, by simply blending two heterogeneous polysaccharide nanofibers, namely chitosan nanofiber (ChNF) and cellulose nanofiber (CNF), a ChNF-CNF composite was prepared, which exhibited improved mechanical properties and antioxidant activity. ChNF was isolated using the aqueous counter collision (ACC) method, while CNF was isolated using the combination of TEMPO oxidation and the ACC method, which resulted in smaller size of CNF than that of ChNF. The prepared composite was characterized in terms of morphologies, FT-IR, UV visible, thermal stability, mechanical properties, hygroscopic behaviors, and antioxidant activity. The composite was flexible enough to be bent without cracking. Better UV-light protection was shown at higher content of ChNF in the composite. The high ChNF content showed the highest antioxidant activity in the composite. It is the first time that a simple combination of ChNF-CNF composites fabrication showed good mechanical properties and antioxidant activities. In this study, the reinforcement effect of the composite was addressed. The ChNF-CNF composite is promising for active food packaging application.

| S-EPMC7557881 | biostudies-literature

Enzyme Crystals and Hydrogel Composite Membranes as New Active Food Packaging Material.

Project description:The great antimicrobial and antioxidant potential of enzymes makes them prone to be used as active packaging materials to preserve food from contamination or degradation. Major drawbacks are connected to the use of enzymes freely dispersed in solution, due to reduced protein stability. The immobilization of enzymes on solid supports to create biocatalytic interfaces has instead been proven to increase their stability and efficiency. In this work, it is shown that enzymes crystallized on hydrogel composite membranes (HCMs) can exert an effective antimicrobial action, thus making the composite membrane and crystals biofilm a potential active substrate for food packaging applications. The antimicrobial hen egg white lysozyme is crystallized on the surface of the hydrogel layer of HCMs, and its activity is determined by measuring the decrease in absorbance of Micrococcus lysodeikticus culture incubated with the specimen. The overall catalytic efficiency of the antimicrobial HCMs increases by a factor of 2 compared to the pure enzyme dissolved in solution at the same quantity. Because the enzyme in crystalline form is present in higher concentration and purity than in the solution, both its overall catalytic efficiency and antimicrobial action increase. Moreover, the hydrogel environment allows a better protein stabilization and retention during crystals dissolution.

| S-EPMC6607345 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data